GSD2004A-V Vishay Semiconductors Dual Common-Anode Small-Signal High-Voltage Switching Diode Features 2 • Silicon Epitaxial Planar Diode • Fast switching dual common-anode diode, especially suited for applications requiring high voltage capability • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 3 1 1 2 3 17033 Mechanical Data Case: SOT-23 Weight: approx. 8.8 mg Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part GSD2004A-V Ordering code Marking Remarks GSD2004A-V-GS18 or GSD2004A-V-GS08 DBA Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit VR 240 V VRRM 300 V IF 225 mA IFRM 625 mA tp = 1 μs IFSM 4 A tp = 1 s IFSM 1 Continuous reverse voltage Peak repetitive reverse voltage Forward current (continuous) Peak repetitive forward current Non-repetitive peak forward current Ptot Power dissipation 1) 350 A 1) mW Device on Fiberglass Substrate, see layout on bottom of second page Document Number 85727 Rev. 1.5, 12-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 GSD2004A-V Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 3571) °C/W Tj 150 °C Tstg - 65 to + 150 °C Typical thermal resistance junction to ambient air Junction temperature Storage temperature range 1) Device on Fiberglass Substrate, see layout on bottom of second page Electrical Characteristics Tamb = 25 °C, unless otherwise specified Test condition Symbol Min. Reverse breakdown voltage Parameter IR = 100 μA VBR 300 Leakage current VR = 240 V VR = 240 V, Tj = 150 °C Unit IR 100 nA IR 100 μA V IF = 20 mA VF 0.87 V VF 1 V VF = VR = 0, f = 1 MHz CD 5 pF IF = IR = 30 mA, Irr = 3 mA, RL = 100 Ω trr 50 ns Diode capacitance 1) Max. IF = 100 mA Forward voltage Reverse recovery time Typ. 0.83 Device on Fiberglass Substrate, see layout on bottom of second page Typical Characteristics I F - Forward Current ( mA ) 100 T J = 150 ° C 10 100 ° C 1 25 ° C 0.1 100 200 300 400 500 600 700 800 900 1000 18543 VF - Forward Voltage ( mV ) Figure 1. Typical Instantaneous Forward Characteristics www.vishay.com 2 IR - Reverse Leakage Current ( nA ) Tamb = 25 °C unless otherwise specified 10 5 T J = 150 ° C 10 4 100 ° C 10 3 10 2 25 ° C 10 0 18544 50 100 150 200 250 VR - Reverse Voltage ( V ) Figure 2. Typical Reverse Characteristics For technical questions within your region, please contact one of the following: Document Number 85727 [email protected], [email protected], [email protected] Rev. 1.5, 12-Aug-10 GSD2004A-V Vishay Semiconductors Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Package Dimensions in millimeters (inches): SOT-23 0.9 (0.035) 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number 85727 Rev. 1.5, 12-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000