Dc GL34 Technical specifications of surface mount silicon rectifier Datasheet

GL34A
DC COMPONENTS CO., LTD.
R
THRU
RECTIFIER SPECIALISTS
GL34M
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE - 50 to 1200 Volts
CURRENT - 0.5 Ampere
FEATURES
* Ideal for surface mounted applications
* Low leakage current
* Glass passivated junction
SM-2(DO-213AA)
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
*Terminals: Solder plated solderable per
MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 0.036 gram
.150(3.81)
.130(3.33)
.022(.56)
.016(.41)
.068(1.77)
.060(1.52)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
GL34A
GL34J
GL34K
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
VDC
50
100
200
400
600
800
1000
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current T A = 75oC
Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
@T A = 25 o C
o
GL34D
GL34G
Volts
IO
0.5
Amps
30
Amps
IR
@T A = 125 C
1.1
Volts
5.0
Maximum Thermal Resistance (Note 2)
RθJL
50
30
Typical Junction Capacitance (Note 1)
CJ
8.0
T J , T STG
-65 to + 175
Operating and Storage Temperature Range
GL34M UNITS
I FSM
VF
Maximum Forward Voltage at 0.5A DC
Maximum DC Reverse Current at
Rated DC Blocking Voltage
GL34B
uAmps
0
C/ W
pF
0
C
NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC
2. Thermal resistance (Junction to Ambient),.24in2 (6.0mm2 ) coppeer pads to each terminal.
306
NEXT
BACK
NEXT
EXIT
BACK
RATING AND CHARACTERISTIC CURVES ( GL34A THRU GL34M )
0.5
.4
.3
.2
.1
20
10
8
DC COMPONENTS CO., LTD.
R
307
NEXT
NEXT
BACK
BACK
EXIT
EXIT
Similar pages