TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 VOIDLESS-HERMETICALLY-SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified per MIL-PRF-19500/228 DEVICES LEVELS 1N3611 thru 1N3613 *1N3614 and 1N3957 JAN, JANTX * JAN, TX, TXV DESCRIPTION “A” Package This “standard recovery” rectifier diode series is military qualified to MIL-PRF-19500/228 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 1.0 Amp rated rectifiers for working peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-glass construction using an internal “Category I” metallurgical bond. These devices are similar in ratings to the 1N5614 thru 1N5622 series where surface mount MELF package configurations are available by adding a “US” suffix (see separate data sheet for 1N5614US thru 1N5622US). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both throughhole and surface mount packages. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES ¾ Popular JEDEC registered 1N3611 thru 1N3614 and 1N3597 series ¾ Voidless hermetically sealed glass package ¾ Internal “Category I” Metallurgical bonds ¾ Working Peak Reverse Voltage 200 to 1000 Volts. ¾ JAN, JANTX, and JANTXV available per MIL-PRF-19500/286 (for JANS, see 1N5614-5622 series) ¾ Surface mount equivalents also available in a square end-cap MELF configuration with “US” suffix (also see 1N5614US thru 1N5622US) T4-LDS-0190 Rev. 1 (110047) Page 1 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 APPLICATIONS / BENEFITS ¾ Standard recovery 1 Amp rectifiers 200 to 1000 V ¾ Military and other high-reliability applications ¾ General rectifier applications including bridges, half-bridges, catch diodes, etc. ¾ High forward surge current capability ¾ Extremely robust construction ¾ Low thermal resistance ¾ Controlled avalanche with peak reverse power capability ¾ Inherently radiation hard as described in Microsemi MicroNote 050 MAXIMUM RATINGS ¾ Junction & Storage Temperature: -65oC to +175oC ¾ Thermal Resistance: 38oC/W junction to lead at 3/8 inch (10 mm) lead length from body ¾ Average Rectified Forward Current (IO): 1.0 Amps @ TA = 100ºC and 0.30 Amps at 150ºC ¾ Forward Surge Current: 30 Amps @ 8.3 ms half-sine ¾ Solder Temperatures: 260ºC for 10 s (maximum) MECHANICAL AND PACKAGING ¾ CASE: Hermetically sealed voidless hard glass with Tungsten slugs ¾ TERMINATIONS: Axial leads are copper with Tin/Lead (Sn/Pb) finish ¾ MARKING: Body paint and part number, etc. ¾ POLARITY: Cathode band ¾ TAPE & REEL option: Standard per EIA-296 ¾ WEIGHT: 500 mg (approx) ¾ See package dimensions on last page T4-LDS-0190 Rev. 1 (110047) Page 2 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS @ 30oC Case Temperature TYPE MINIMUM WORKING BREAKDOWN PEAK VOLTAGE REVERSE VOLTAGE VRWM VBR @ 100μA VOLTS JAN1N3611 JAN1N3612 JAN1N3613 JAN1N3614 JAN1N3957 200 400 600 800 1000 VOLTS 240 480 720 920 1150 AVERAGE RECTIFIED CURRENT (NOTE 2) IO MAXIMUM FORWARD VOLTAGE VF @ 1 A (PULSED) AMPS 100oC 150oC 1.0 0.30 1.0 0.30 1.0 0.30 1.0 0.30 1.0 0.30 VOLTS 1.1 1.1 1.1 1.1 1.1 MAXIMUM REVERSE CURRENT IR @ VRWM MAXIMUM SURGE CURRENT (NOTE1) IFSM μA AMPS 25oC 1.0 1.0 1.0 1.0 1.0 150oC 300 300 300 300 300 30 30 30 30 30 NOTE 1: TA = 25oC, IO = 1.0 A, 10 surges of 8.3 ms @ 1 minute intervals NOTE 2: Linearly derate at 13.3 mA/ºC between TA=100ºC and 175ºC SYMBOLS & DEFINITIONS Symbol Definition VBR Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. VRWM Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range. VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. IR Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. T4-LDS-0190 Rev. 1 (110047) Page 3 of 5 TECH HNICA AL DA ATA SH HEET 6 Laake Street, Lawren nce, MA 01841 1-8000-446-1158 / (9788) 620-2600 / Fax:: (978) 689-0803 Web bsite: http://www.microsemi.com Gortt Road Business Park, P Ennis, Co. Clare, C Ireland Tel: +353 (0) 65 68400044 Fax: +353 (0) ( 65 6822298 GRAPHS FIGURE 1 T TYPICAL FO ORWARD CO ONDUCTAN NCE CURVE FIGURE 2 AL LLOWABLE E PEAK SURG GE vs DURA ATION FIGURE 3 SUR RGE DURAT TION vs PUL LSE CURREN NT Square Pullse Current vss Duration forr Non-Repetittive Pulse T4-L LDS-0190 Rev.. 1 (110047) Page 4 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS NOTE: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Dimension BL shall include the entire body including slugs and sections of the lead over which the diameter is uncontrolled. This uncontrolled area is defined as the zone between the edge of the diode body and extending .050 inch. (1.27 mm) onto the leads. T4-LDS-0190 Rev. 1 (110047) Ltr BD BL LD LL Dimensions Inches Millimeters Min Max Min Max .060 .110 1.52 2.79 .125 .205 3.18 5.21 .025 .034 0.64 0.86 .600 1.500 15.24 38.10 Notes 4 3 3 Page 5 of 5