SPECIFICATION CONTROL DRAWING Product Revisions Part Name D-142-65 F D-142-66 D Product Dimensions A B L min min max 10.80 11.65 29.75 (.425) (.460) 13.35 13.84 (1.170) (.525) (.545) Cable Dimensions D E J±1.3 max min (.05) 11.4 5.7 9.4 (.450) (.225) 13.6 8.9 (.370) (.535) (.350) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Natural. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue. 4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: Natural. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. Temperature range: -55°C to +125°C. 3. Install using Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70. 4. Assemblies will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747. For best results, prepare the cable as shown: *A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for ROUGHNESS IN 0.0 N/A their application. MICRON 0 N/A TITLE: SOLDERSLEEVE* SHIELD TERMINATOR DOCUMENT NO.: D-142-6X DCR NUMBER: DRAWN BY: DATE: REV.: DOC ISSUE: R. MAPALO 07/14/98 SEE TABLE 2 If this document is printed it becomes uncontrolled. Check for the latest revision REPLACES: D981311 SCALE: NONE D961394 SIZE: A SHEET: 1 of 1