DA Cascade Series, DAC-035-12-02 Thermoelectric Assembly Innovative Technology for a Connected World CAscade series Direct-to-air thermoelectric assembly The DA Cascade Series is an Air to Air thermoelectric assembly (TEA) that offers dependable, compact performance by cooling objects via conduction. Heat is absorbed through a cold plate and dissipated thru a high density heat exchanger equipped with an air ducted shroud and brand name fan. The thermoelectric modules are custom designed multistage cascades to achieve a high temperature differential, which allows this series to reach colder temperatures than standard DA product offerings. Custom configurations and moisture protection options are available, however, MOQ applies. FEATURES Applications • • • • • • • • • • Compact design Precise temperature control Reliable solid-state operation DC operation RoHS compliant Analytical instrumentation Medical diagnostics Photonics laser systems Industrial instrumentation Food and beverage cooling Specifications Cooling Power Qcmax (W) 31 Running Current (A) 4.8 Startup Current (A) 5.5 Nominal Voltage (V) 12 Max Voltage (V) 14 Power Input (W) Operating Temperature (°C) Weight (kg) Americas: +1.888.246.9050 Europe: +46.31.704.67.57 Asia: +86.755.2714.1166 [email protected] www.lairdtech.com/thermal TM 1.2 MTBF (fans – hrs) 50,000 Performance Tolerance ±10% Performance Curve global solutions: local support 58 -10 to 54 DA Cascade Series, DAC-035-12-02 Thermoelectric Assembly Innovative Technology for a Connected World Isometric Drawings Mounting Hole Location Wiring Schematic Electrical connections: “+”: “– ”: “F+”: “F– ”: +TEM – TEM +Fan(s) – Fan(s) To use single supply: Lift the jumpers and rotate 90° to short-cut the pin pairs. Connect the unit to “+” & “–”. Notes Warning: Single supply not applicable in heating mode or with PWM-regulation. For indoor use only Thermally Conductive Grease enclosed Overheating Thermostat: 75°C ± 5°C on hot side heat sink surface THR-DS-DAC-035-12-02 0610 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.