LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS 15mm height snap-ins, 85C SLM @15mm height snap-ins @Endurance with ripple current : 85C 2000 hours @Non solvent-proof type @Pb-free design low profile SMH ?SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +85C Rated Voltage Range Capacitance Tolerance Leakage Current 160 to 400Vdc P20% (M) I[3 CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V tanE (Max.) 0.20 Rated voltage (Vdc) 160 to 400V Z (-25C) /Z (+20C) 4 Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) (at 20C, 120Hz) (at 20C after 5 minutes) (at 20C, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for 2000 hours at 85C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C without voltage applied. Capacitance change [P15% of the initial value D.F. (tanE) [150% of the initial specified value Leakage current [The initial specified value Endurace Shelf Life ?DIMENSIONS [mm] @Terminal Code : VS Sleeve (PET) Negative mark PC board pin-out FD+1max. 10 2-F2 4.0P0.5 LP2 Vent No plastic disk is the standard design ?RATED RIPPLE CURRENT MULTIPLIERS ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 @Frequency Multipliers 18 E S LM AAA VS N AAA M AAA S Frequency (Hz) 160 to 250Vdc 400Vdc Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470,330MF:331) Dummy terminal code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 Please refer to "A guide to global code (snap-in type)" ?STANDARD RATINGS WV (Vdc) 160 180 200 Cap (mF) Case size fDbL(mm) tane Rated ripple current (Arms/ 85c,120Hz) 180 270 390 560 150 220 330 470 150 220 22 B 15 25.4 B 15 30 B 15 35 B 15 22 B 15 25.4 B 15 30 B 15 35 B 15 22 B 15 25.4 B 15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.99 1.29 1.47 1.74 0.90 1.16 1.35 1.60 0.90 1.16 Part No. ESLM161VSN181MP15S ESLM161VSN271MQ15S ESLM161VSN391MR15S ESLM161VSN561MA15S ESLM181VSN151MP15S ESLM181VSN221MQ15S ESLM181VSN331MR15S ESLM181VSN471MA15S ESLM201VSN151MP15S ESLM201VSN221MQ15S WV (Vdc) 200 250 400 (1/1) Cap (mF) Case size fDbL(mm) tane Rated ripple current (Arms/ 85c,120Hz) 270 390 100 150 220 330 47 68 100 120 30 B 15 35 B 15 22 B 15 25.4 B 15 30 B 15 35 B 15 22 B 15 25.4 B 15 30 B 15 35 B 15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.22 1.46 0.73 0.96 1.10 1.34 0.50 0.65 0.74 0.81 Part No. ESLM201VSN271MR15S ESLM201VSN391MA15S ESLM251VSN101MP15S ESLM251VSN151MQ15S ESLM251VSN221MR15S ESLM251VSN331MA15S ESLM401VSN470MP15S ESLM401VSN680MQ15S ESLM401VSN101MR15S ESLM401VSN121MA15S CAT. No. E1001E