RoHS HFC10 High Frequency Chip Inductors Dimensions: 0.079±0.008 (2.01±0.20) C= 0.035±0.008 (0.90±0.2) *C= 0.047±0.008 (1.2±0.2) C 0.049±0.008 (1.24±0.20) Inches (mm) 0.020±0.012 (0.51±0.30) 0.039 (0.99) 0.047 (1.19) Features • 0805 EIA size for high board density applications. • Excellent Q and SRF characteristics for high frequency applications. • Cost effective monolithic construction Electrical Inductance range: 1.0nh to 470nh applications Tolerance: use K for 10%, J for 5%, S for ±.3nh Inductance & Q: Measured at 100MHz HP4291A & HP16197A Inductance vs Frequency Characteristics: Measured on HP4192A Q vs Frequency Characterisitcs: Measured on HP4192A SRF: Measured on HP4291A & HP16197A or HP8753C IDC: Measured on HP4291 with HP6632A Mechanical Operating Temperature: -55ºC-125ºC Storage Temperature: Under 25ºC, Humidity 40% - 65% Solderability: 90% terminal coverage Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 245ºC ± 5ºC (pb Free) Immersion time: 4 ± 1 sec. Resistance to solder heat: No damage to part Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 260ºC ± 5ºC (pb Free) Immersion time: 10 ± 1 sec. Physical 0.045 (1.14) Allied Part Number Inductance (nh) @100MHz Tolerance (%) Q Q SRF Typical Typical Typical @100MHz @800MHz (MHz) DCR Max. (Ω) IDC Max. (mA) HFC10-1N0S-RC 1.0 0.3nh >6000 0.10 300 HFC10-1N2S-RC 1.2 0.3nh 13 40 40 >6000 0.10 300 >6000 0.10 300 40 HFC10-1N5S-RC 1.5 0.3 nh 13 HFC10-1N8S-RC 1.8 0.3 nh 13 45 >6000 0.10 300 HFC10-2N2S-RC 2.2 0.3 nh 13 48 >6000 0.10 300 HFC10-2N7S-RC 2.7 0.3 nh 13 40 >6000 0.10 300 HFC10-3N3K-RC 3.3 10 15 56 >6000 0.13 300 HFC10-3N9K-RC 3.9 10 15 54 5400 0.15 300 HFC10-4N7K-RC 4.7 10 15 50 4500 0.20 300 HFC10-5N6K-RC 5.6 10 15 53 4000 0.23 300 HFC10-6N8K-RC 6.8 10 15 51 3650 0.25 300 HFC10-8N2K-RC 8.2 10 15 53 3000 0.28 300 45 2500 0.30 300 HFC10-10NK-RC 10 10 16 HFC10-12NK-RC 12 10 16 48 2450 0.35 300 HFC10-15NK-RC 15 10 17 48 2000 0.40 300 HFC10-18NK-RC 18 10 17 43 1750 0.45 300 47 1700 0.50 300 HFC10-22NK-RC 22 10 17 HFC10-27NK-RC 27 10 18 38 1550 0.55 300 HFC10-33NK-RC 33 10 19 35 1350 0.60 300 HFC10-39NK-RC 39 10 21 40 1300 0.65 300 HFC10-47NK-RC 47 10 21 38 1200 0.70 300 HFC10-56NK-RC 56 10 21 31 1150 0.75 300 28 1000 0.80 300 16 850 0.90 300 HFC10-68NK-RC 68 10 21 HFC10-82NK-RC 82 10 22 HFC10-100NK-RC 100 10 23 730 1.00 300 HFC10-120NK-RC 120 10 22 650 1.20 300 HFC10-150NK-RC 150 10 22 550 1.40 300 HFC10-180NK-RC *180 10 23 500 1.80 300 450 2.00 300 HFC10-220NK-RC *220 10 20 HFC10-270NK-RC *270 10 20 400 2.50 200 HFC10-330NK-RC *330 10 22 380 3.00 200 HFC10-390NK-RC *390 10 17 330 3.50 200 17 300 4.00 200 Packaging: 1.5nh - 150nh, HFC10-470NK-RC *470 10 4000 pieces per reel. *at 50MHz. 180nh - 470nh, Available in tighter tolerances. 3000 pieces per 7 inch reel. All specifications subject to change without notice. 714-665-1140 13 ALLIED COMPONENTS INTERNATIONAL REVISED 10/06/08 www.alliedcomponents.com