THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0629 EE94-543G5 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK ABSOLUTE M AXIMUM RATING S TABLE 1.0 PARAMETER UNITS Storage Temperature Supply Voltage (Vcc) MODEL SPECIFICATIONS : MODEL EE94-51*G5 Center Frequency Total Frequency Tolerance MODEL EE94-53*G5 Center Frequency Total Frequency Tolerance MODEL EE94-54*G5 Center Frequency Total Frequency Tolerance MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C -0.5 - 7.0 Vdc NOTE TABLE 2.0 * Added pin connection option number. See table 8 (Fo) 13 167 -25 25 MHz ppm 1 * Added pin connection option number. See table 8 (Fo) 13 200 -50 50 MHz ppm 1 * Added pin connection option number. See table 8 (Fo) 13 200 -100 100 MHz ppm 1 * Added pin connection option number. See table 8 (Fo) 13 167 -20 20 MHz ppm 1 Center Frequency Total Frequency Tolerance MODEL EE94-52*G5 EE94-51xG5-Series EE94-52xG5-Series EE94-53xG5-Series EE94-54xG5-Series DESCRIPTION The Connor Winfield EE945xxG5-series is a fixed frequency 10 pad surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and tight frequency stability. Operating at 3.3V supply voltage, the EE945xxG5-series provides option for LVPECL differential outputs and/or an enable / disable function. FEATURES OPERATING SPECIFIC ATIONS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS 0 - 70 °C Operating Temperature Range NOTE OVERALL FREQUENCY TOLERANCE: EE94-51xG5 - ±25PPM EE94-52xG5 - ±50PPM EE94-53xG5 - ±100PPM EE94-54xG5 - ±20PPM Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset - -60 -100 -130 -140 1 - pS RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz - - Vdc 2 1.68 Vdc 2 TEMPERATURE RANGE: 0 to 70°C LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE INPUT CHARACTERISTICS ENABLE/DISABLE FUNCTION Disable Input Voltage (High) (Vih) 2.275 Enable Input Voltage (Low) (Vil) - LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) TABLE 4.0 MINIMUM 2.275 45 - NOMINAL 50 - MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % ns PACKAG E CHARACTERISTICS NOTE 3 TAPE AND REEL PACKAGING ORDERING INFORMATION TABLE 6.0 Soldering Process SURFACE MOUNT PACKAGE 4 Hermetically sealed, leadless ceramic package. PROCESS RECOMMENDATIONS LOW JITTER <1pS RMS RoHS 5/6 COMPLIANT TABLE 5.0 Package 3.3V OPERATION See solder profile page 2. EE94-543G5 - 155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec230 PAGE 1 OF 2 REV: 01 DATE: 07/27/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Notes 1) Inclusive of calibration tolerance @ 25°C, frequency vs. temperature, frequency vs. change in supply voltage, frequency vs. load variations, shock and vibration and 10 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V Options Chart (Replace the x with an option number) Pin Connections Output Waveform “1” LEVEL “0” LEVEL Pin 1 2 3 4 5 6 7 8 9 10 TABLE 7.0 Connection N/C Option Pin N/C Ground (Vee) N/C Option Pin Q Output N/C + Supply (Vcc) N/C TABLE 8.0 Option Number 0 1 2 3 4 Option Description: Pin 2 and Pin 6: No Connection Pin 6 Complementary Output, Pin 2 No Connection Pin 2 Enable / Disable Function, Pin 6 No Connection (Note: When oscillator is disabled the output, pin 7 is in a high state (Voh). Pin 2 Complementary Output, Pin 6 No Connection Pin 2 Enable / Disable Function, Pin 6 Complementary Output (Note: When oscillator is disabled the output pin 7 is in a high state (Voh) and pin 6 is in a low state(Vol). Dimensional Tolerance: ±.005” (.127mm) Package Outline CW 0629 EE94-543G5 155.52M Suggested Pad Layout Solder Profile Test Circuit Ramp-Up Rate Temperature 3°C/second max. from 150°C to 225°C. 225°C 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C Q 100°C 25°C Q Option Pin 0 Time 60-120s Max. 10-30s 60-150s Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Ec230 PAGE 2 OF 2 REV: 01 DATE: 07/27/06 aCopyright 2001 Connor-Winfield all rights reserved.