FLLD3 … PV High-current 3-phase EMC Filter Overview The three phase filter series is intended to be used in energy conversion inverter systems (e.g. photo voltaic and wind power), between the inverter and the line or in motor drive systems. The filters are optimized for geometry and power loss. As the Capacitance Company, KEMET is only using high quality capacitors in its filter series. Technical specifications Rated voltage Rated current Leakage current Rated temperature Temperature range Climate category Voltage test 520 VAC 150 – 2500 A < 5 mA *) 50°C -40°C to +100°C 40/100/21 P -> P 2250 VDC P -> E 3000 VDC The FLLE2…PV-series is designed according to IEC/EN 60939 and UL 1283. Power loss @ 25°C/DC (W) Weight (kg) FLLD3150APVI2 150 25 6 FLLD3180APVI2 180 35 6 FLLD3250APVI2 250 45 7 FLLD3320APVI1 320 15 10 FLLD3400APVI1 400 25 10 L1 L1 FLLD3600APVI1 600 40 11 L2 L2 FLLD3800APVI1 800 50 17 L3 L3 FLLD31K0APV1 1000 75 17 FLLD31K6APVI1 1600 130 26 FLLD32K5APVI1 2500 250 55 PE PE LINE Rated current @ 50°C (A) Filter Typical insertion loss dB 100 Sym Asym dB 100 Sym Asym dB 100 80 80 80 60 60 60 40 40 40 20 20 20 0 0.01 0.1 1 10 150 to 250 A 100 MHz 0 0.01 0.1 1 10 320 to 1000 A 100 MHz 0 0.01 Sym 0.1 Asym 1 10 100 MHz 1600 and 2500 A KEMET EMC Filters 1 LOAD *) Maximum leakage current under normal operating conditions. If two phases are interrupted, leakage current can be much higher. FLLD3 … PV High-current 3-phase EMC Filter Mechanical dimensions FLLD3 … PVI1 Busbar connections Z L FLLD3 … PVI2 Threaded terminals Z W L W M U U U U H Y H X W1 W2 L1 ØN L1 Ø12 (x6) ØN L1 L1 ØN K K I J I J I 320 to 1000A 1600 A 2500 A Filter W1 W2 Dimensions in mm L W H L1 W1 W2 U X Y Z I J K N M FLLD3150APVI2 300 160 120 120 185 210 50 M10 FLLD3180APVI2 300 160 120 120 185 210 50 M10 FLLD3250APVI2 300 180 125 120 205 230 55 M12 FLLD3320APVI1 300 210 115 120 235 260 60 6 25 45 15 10.5 M12 FLLD3400APVI1 300 210 115 120 235 206 60 6 25 45 15 10.5 M12 FLLD3600APVI1 300 210 135 120 235 260 60 8 25 45 15 10.5 M12 FLLD3800APVI1 350 230 170 145 255 280 60 8 40 55 20 14 M12 FLLD31K0APVI1 350 230 170 145 255 280 60 8 40 55 20 14 M12 FLLD31K6APVI1 400 250 170 170 275 300 60 10 60 95 17 26 26 14 M12 FLLD32K5APVI1 600 300 200 250 330 370 100 15 100 100 20 35 35 14 M16 Legal disclaimer notice All product specifications, statements, information and data (collectively, the “information”) are subject to change without notice. the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. All information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that failure of an electrical component does not result in a risk of personal injury or property damage. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their applications. Any technical advice inferred from this information or otherwise provided by us with reference to Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required KEMET EMC Filters 2