LCD10 SERIES 10 WATTS DC-DC CONVERTER FEATURES • 10 WATTS MAXIMUM OUTPUT POWER • ULTRA LOW QUIESCENT CURRENT • SINGLE OUTPUT UP TO 3A • SMALL SIZE AND LOW PROFILE 1.0 x 1.0 x 0.39 INCH • HIGH EFFICIENCY UP TO 91% • 2:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • INPUT TO OUTPUT ISOLATION:1600VDC • BUILT-IN EN55022 CLASS B FILTER • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU ： APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS Positive logic Remote ON/OFF, Without trim , Without CTRL pin DESCRIPTION LCD10 DC/DC converters provide up to 10 watts of output power in an industry standard package and footprint. These units are specifically designed to meet the power needs of low profile. All models feature with 2:1 wide input voltage of 9~18 VDC, 18~36 VDC and 36~75VDC, comprehensively protected against over-current, over-voltage and input under-voltage protection conditions, and trimmable output voltage. The converter can meet EN55022 Class B with an external capacitor only. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power (Rated) Output power (Maximum) 10 Watts With Trim up 10% 11 Watts With Trim up 20% 12 Watts Voltage accuracy ±1% Minimum load 0% 3.3 & 12Vout ± 10% Voltage adjustability Single (Note 6) +20%,-10% Others ± 0.2% Single Line regulation LL to HL at Full Load ± 0.5% Dual ± 0.2% Single No Load to Full Load ± 1.0% Dual Load regulation ± 0.1% Single 10% Load to 90% Load Dual ± 0.8% ± 5% Cross regulation Asymmetrical load 25%/100% FL Dual 12VDC nominal input 9 ~ 18VDC 24VDC nominal input 18 ~ 36VDC 48VDC nominal input 36 ~ 75VDC 25VDC 1sec, max. 12VDC input Input surge voltage 50VDC 1sec, max. 24VDC input 48VDC input 100VDC 1sec, max. Input reflected ripple current 30mAp-p Nominal input and Power up 30ms, max. Start up time constant resistive load Remote ON/OFF 30ms, max. 12VDC input 9VDC, max. Start-up voltage 24VDC input 18VDC, max. 48VDC input 36VDC, max. 12VDC input 8VDC Shutdown voltage 24VDC input 16VDC 48VDC input 33VDC Input voltage range Remote ON/OFF (Note 7) Positive logic(Option) DC-DC ON Open or 3 V < Vr < 15V DC-DC OFF Short or 0V < Vr < 1.2V DC-DC ON Short or 0V < Vr < 1.2V 0.02% / ºC, max. Negative logic(Standard) Temperature coefficient DC-DC OFF Open or 3V < Vr < 15V Transient response recovery time 25% load step change 250µs Input current of Remote control pin Nominal input -0.5mA~1.0mA 3.3VDC output 3.7VDC~5.4VDC Remote off state input current Nominal input 2.5mA 5VDC output 6.3VDC~7.4VDC Over voltage protection 12VDC output 13.5VDC~19.6VDC ENVIRONMENTAL SPECIFICATIONS 15VDC output 18.3VDC~22.0VDC Operating ambient temperature -40 to +85 (with derating) 24VDC output 29.1VDC~32.5VDC Maximum case temperature +105ºC Over load protection % of FL at nominal input 150% Storage temperature range -55ºC ~ +125ºC Short circuit protection Continuous, automatics recovery 16.18 /Watt Thermal impedance Natural convection GENERAL SPECIFICATIONS (Note 8) Natural convection with heat-sink 15.13 /Watt Efficiency See table Thermal shock MIL-STD-810F Input to Output 1600VDC, min. 1minute Isolation voltage MIL-STD-810F Input(Output) to Case 1000VDC, min. 1minute Vibration Ripple and noise 20MHz bandwidth (Note 4) ± See table ℃ ℃ ℃ ℃ 9 Isolation resistance 500VDC 10 ohms, min. Isolation capacitance 1500pF, max. Switching frequency 330kHz±10% Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Copper Base material FR4 PCB Potting material Epoxy (UL94-V0) 1.0 X 1.0 X 0.39 Inch Dimensions (25.4 X 25.4 X 9.9 mm) Weight 16.5g(0.58oz) BELLCORE TR-NWT-000332 1.756x106hrs MTBF (Note 1) MIL-HDBK-217F 1.111x106hrs Page 1 of 3 Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 9) EN55022 ESD EN61000-4-2 Radiated immunity EN61000-4-3 Fast transient (Note 10) EN61000-4-4 Surge (Note 10) EN61000-4-5 Conducted immunity EN61000-4-6 www.pduke.com Air Contact ± 8kV ± 6kV 10 V/m ± 2kV ± 1kV Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A 3 Vr.m.s Perf. Criteria A 2013/6/7 LCD10 SERIES 10 WATTS Model Number LCD10-12S3P3 LCD10-12S05 LCD10-12S12 LCD10-12S15 LCD10-12S24 LCD10-12D05 LCD10-12D12 LCD10-12D15 LCD10-24S3P3 LCD10-24S05 LCD10-24S12 LCD10-24S15 LCD10-24S24 LCD10-24D05 LCD10-24D12 LCD10-24D15 LCD10-48S3P3 LCD10-48S05 LCD10-48S12 LCD10-48S15 LCD10-48S24 LCD10-48D05 LCD10-48D12 LCD10-48D15 Input Range Output Voltage 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 - 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Full Load 3000mA 2000mA 830mA 670mA 416mA ± 1000mA ± 416mA ± 333mA 3000mA 2000mA 830mA 670mA 416mA ± 1000mA ± 416mA ± 333mA 3000mA 2000mA 830mA 670mA 416mA ± 1000mA ± 416mA ± 333mA DC-DC CONVERTER (3)(4) (2) (3) (5) Output No Load Eff Ripple & Noise Input Current (%) 40mVp-p 40mVp-p 60mVp-p 60mVp-p 60mVp-p 40mVp-p 60mVp-p 60mVp-p 40mVp-p 40mVp-p 60mVp-p 60mVp-p 60mVp-p 40mVp-p 60mVp-p 60mVp-p 40mVp-p 40mVp-p 60mVp-p 60mVp-p 60mVp-p 40mVp-p 60mVp-p 60mVp-p 10mA 10mA 10mA 10mA 10mA 10mA 10mA 10mA 6mA 6mA 6mA 6mA 6mA 6mA 6mA 6mA 4mA 4mA 4mA 4mA 4mA 4mA 4mA 4mA Capacitor Load max 83 86 89 90 91 86 89 90 85 86 91 90 91 86 90 90 85 87 90 90 91 87 91 90 3500µF 2500µF 430µF 350µF 125µF ±1440µF ± 250µF ± 180µF 3500µF 2500µF 430µF 350µF 125µF ±1440µF ± 250µF ± 180µF 3500µF 2500µF 430µF 350µF 125µF ±1440µF ± 250µF ± 180µF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment) 2. Typical value at nominal input and no load. 3. Typical value at nominal input and full load. 4. The ripple and noise of output voltage 24VDC is measured with a 1µF/50V X7R 1206 MLCC. The ripple and noise of other output voltage is measured with a 10µF/25V X7R 1206 MLCC. 5. Test by minimum input and constant resistive load. 6. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the TRIM pin and either the +VOUT pin or the -VOUT pin. 7. The CTRL pin voltage is reference to -INPUT. The order number please see product standard table. 8. Heat-sink is optional and P/N:7G-0047C-F. 9. The LCD10 series standard module meet EN55022 Class A without external components and meet Class B with external components. For more detail information, please contact with P-DUKE. 10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF /100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. LCD10-48S05 Derating Curve With Heat-sink 120 100 100 OUTPUT POWER(%) OUTPUT POWER(%) LCD10-48S05 Derating Curve 120 80 60 Natural Convection 100LFM 200LFM 300LFM 400LFM 500LFM 40 20 -20 0 20 40 60 80 AMBIENT TEMPERATURE,TA( ) ℃ 100 20 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE,TA( ) 120 ℃ LCD10-48S05 Efficiency VS Output Current 93 93 89 89 EFFICIENCY(%) EFFICIENCY(%) Natural Convection 100LFM 200LFM 300LFM 400LFM 500LFM 40 120 LCD10-48S05 Efficiency VS Input Voltage 85 81 77 85 81 77 Vin= 36V Vin= 48V Vin= 75V 73 73 69 69 36 Page 2 of 3 60 0 0 -40 80 40 44 48 52 56 60 64 INPUT VOLTAGE(V) 68 72 10 75 www.pduke.com 20 30 40 50 60 70 % of FULL LOAD 80 90 100 2013/6/7 LCD10 SERIES 10 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE + INPUT - INPUT CTRL +OUTPUT TRIM -OUTPUT DUAL + INPUT - INPUT CTRL +OUTPUT COMMON -OUTPUT EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 5 RU RD 5 4 PRODUCT STANDARD TABLE Option Negative logic remote ON/OFF(Standard) Positive logic remote ON/OFF Without CTRL pin Negative logic remote ON/OFF without TRIM pin Without CTRL &TRIM pin Positive logic remote ON/OFF without TRIM pin Page 3 of 3 www.pduke.com Suffix -A -B -C -D -E 2013/6/7