LP06 Series SMT High Current Inductors Features Applications • Compact Design for easy SMT • Power Supply Modules Mounting • Robust Design for High Current DC/ DC Applications • Magnetically Shielded for Reduced EMI • Notebook Computers • Servers Packaging Reel Diameter: 13”, Reel Width: 24 mm, Pieces/Reel: 600 Mechanical Recommended PCB layout 13.8 max Schematic 3.5 2.5 1 2.60 3.2 5.5 max 13.5 max LP06-XXX YYWW 3 7.2 1 5.20 2 2 2.60 12.0 TOP VIEW Top View Side View Top View units: mm Electrical Specifications Part Number Inductance1 DCR Idc5 Isat6 (nH, nom.) (mΩ) (A) (A) LP06-101 100 0.5 45 75 LP06-181 180 1 35 65 LP06-221 220 1 35 60 LP06-271 270 1 35 55 LP06-331 330 1 35 48 LP06-391 390 1.9 25 45 LP06-471 470 1.9 25 42 LP06-561 560 2.5 22 40 LP06-681 680 2.5 22 35 LP06-821 820 3.9 17 32 LP06-102 1000 3.9 17 28 LP06-222 2200 4.6 14 15 LP06-332 3300 6.3 12 12 LP06-422 4200 7.1 10.5 11 LP06-472 4700 7.1 9.5 10 LP06-562 5600 10 9.5 8 LP06-722 7200 12 8 7 Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com 1. Tested at 1MHz, 0.1Vrms. 2. Electrical specifications at 25ºC. 3. Operating range: -40ºC to +130ºC. This is a combination of ambient plus temperature rise. 4. Meets UL 94V-0. 5. Idc is the DC current required to produce a temperature rise of 40ºC at an ambient temperature of 25ºC. 6. Isat is the DC current required to reduce the nominal inductance by 10%. 7. Inductance tolerance is +/-10%. 13 (02/08) LP06-1