Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings ............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Suggested solder pad layout............................................................. 4 Packing information.......................................................................... 5 Reel packing.................................................................................... 6 Suggested thermal profiles for soldering processes............................. 6 High reliability test capabilities........................................................... 7 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M 0.5A Surface Mount General Purpose Rectifiers - 50V-1000V Package outline Features DO-213AA • Low profile surface mounted application in order to optimize board space. • High current capability. • High surge capability. • Glass passivated chip junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 .140(3.6) .130(3.3) • Suffix "-H" indicates Halogen-free parts, ex. GL34A-H. SOLDERABLE ENDS .015(.40) .012(.30) .063(1.6) .055(1.4) Mechanical data • • • Epoxy : UL94-V0 rated flame retardant Case : Molded plastic, Mini-Melf / DO-213AA Terminals :Plated terminals, solderable per MIL-STD-750, Method 2026 • • Mounting Position : Any Dimensions in inches and (millimeters) Weight : Approximated 0.03 gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current V R = V RRM T J = 125°C Thermal resistance Junction to ambient Diode junction capacitance f=1MHz and applied 4V DC reverse voltage Storage temperature SYMBOLS *1 V RRM (V) MAX. UNIT IO 0.5 A I FSM 10 A Symbol CONDITIONS *3 VR (V) GL34A 50 35 50 GL34B 100 70 100 GL34D 200 140 200 GL34G 400 280 400 GL34J 600 420 600 GL34K 800 560 800 GL34M 1000 700 1000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 *4 VF (V) TYP. 5.0 IR μA 250 R θJA 125 CJ 4.0 T STG V RMS*2 (V) MIN. O pF O +175 -65 C/W C Operating temperature T J, ( OC) *1 Repetitive peak reverse voltage *2 RMS voltage 1.10 -55 to +150 *3 Continuous reverse voltage *4 Maximum forward voltage@I F=0.5A Page 2 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Rating and characteristic curves (GL34A THRU GL34M) FIG.2-TYPICAL FORWARD FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 0.5 3.0 0.4 0.3 0.2 0.1 0 20 40 60 80 100 120 140 160 180 200 TERMINAL TEMPERATURE ( C) PEAK FORWAARD SURGE CURRENT,(A) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS FORWARD CURRENT,(A) AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 0.6 1.0 0.1 TJ=25 C Pulse Width 300us 1% Duty Cycle 0.01 8.3ms Single Half TJ=25 C Sine Wave 0.001 .1 JEDEC method .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) FIG.5 - TYPICAL REVERSE CHARACTERISTICS 1000 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL JUNCTION CAPACITANCE REVERSE LEAKAGE CURRENT, (uA) 100 JUNCTION CAPACITANCE,(pF) 14 12 10 8 6 4 10 TJ=125°C 1.0 TJ=25 C 2 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 .1 0 20 40 60 80 100 120 140 PERCENTAGE RATED PEAK REVERSE VOLTAGE Page 3 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M Pinning information Pin Pin1 Pin2 Simplified outline cathode anode 1 Symbol 2 1 2 Marking Type number Marking code cathode band only cathode band only cathode band only cathode band only cathode band only cathode band only cathode band only GL34A GL34B GL34D GL34G GL34J GL34K GL34M Suggested solder pad layout C A B Dimensions in inches and (millimeters) PACKAGE A B C DO-213AA 0.071 (1.80) 0.035 (0.90) 0 .102 (2.60) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 4 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M Packing information P0 P1 d E F B A W P D2 D1 T C W1 D unit:mm Item Symbol Tolerance DO-213AA Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width A B C d D D1 D D1 D2 E F P P0 P1 T W W1 0.1 0.1 0.1 0.1 2.0 min 2.0 min 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.3 1.0 1.78 3.90 1.80 1.50 330 50 178.00 62.00 13.00 1.75 5.50 4.00 4.00 2.00 0.23 12.00 18.00 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M Reel packing PACKAGE DO-213AA REEL SIZE 7" REEL (pcs) COMPONENT SPACING (m/m) BOX (pcs) 2,500 4.0 25,000 INNER BOX (m/m) 183*183*123 REEL DIA, (m/m) CARTON SIZE (m/m) CARTON APPROX. GROSS WEIGHT (pcs) (kg) 178 382*262*387 200,000 17.0 Suggested thermal profiles for soldering processes 1.Storage environment: Temperature=5 oC ~40 oC Humidity=55%±25% 2.Reflow soldering of surface-mount devices Critical Zone TL to TP Tp TP Ramp-up TL TL Tsmax Temperature Tsmin tS Preheat Ramp-down 25 t25o C to Peak Time 3.Reflow soldering Profile Feature Soldering Condition Average ramp-up rate(T L to T P ) o <3 C /sec Preheat -Temperature Min(Tsmin) -Temperature Max(Tsmax) -Time(min to max)(t s ) 150 oC 200 oC 60~120sec Tsmax to T L -Ramp-upRate <3 oC/sec Time maintained above: -Temperature(T L ) -Time(t L ) 217 oC 60~260sec 255 oC-0/+5 oC Peak Temperature(T P ) Time within 5 oC of actual Peak Temperature(t P ) 10~30sec Ramp-down Rate <6 oC/sec Time 25 oC to Peak Temperature <6minutes http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7 Formosa MS MINI-MELF General Purpose Rectifier GL34A THRU GL34M High reliability test capabilities Item Test Conditions Reference O 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 OC for 5 sec. MIL-STD-202F METHOD-208 3. High Temperature Reverse Bias V R=80% rate at T J=150 OC for 168 hrs. MIL-STD-750D METHOD-1038 4. Forward Operation Life Rated average rectifier current at T A=25 OC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 5. Intermittent Operation Life 6. Pressure Cooker JESD22-A102 15P SIG at T A=121 OC for 4 hrs. MIL-STD-750D METHOD-1051 7. Temperature Cycling -55 OC to +125 OC dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Forward Surge 8.3ms single half sine-wave , one surge. MIL-STD-750D METHOD-4066-2 9. Humidity at T A=85 OC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 10. High Temperature Storage Life at 175 OC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 7 Document ID Issued Date Revised Date DS-221101 2008/02/10 2010/03/10 Revision C Page. 7