Mean Well GS18B24-P1J 10~18wac-dc single output desktop Datasheet

GS18B
10~18W AC-DC Single Output Desktop
series
Features :
Universal AC input / Full range
No load power consumption<0.5W
Pass energy star(CEC) level
for 5~48V output
Meet EISA 2007 (Energy Independence and Security Act) for 5 ~ 48V
2 pole AC inlet IEC320-C8
Class
power (without earth pin)
Full output 3~48V safety approval
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE
Pass LPS for 9~48V output
2 years warranty
TUV
Rheinland
Product Safety
SPECIFICATION
ORDER NO.
GS18B03-P1J GS18B05-P1J GS18B07-P1J GS18B09-P1J GS18B12-P1J GS18B15-P1J GS18B18-P1J GS18B24-P1J GS18B28-P1J GS18B48-P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
GS18B03
Note.2 3.3V
GS18B05
GS18B07
GS18B09
GS18B12
GS18B15
GS18B18
GS18B24
GS18B28
5V
7.5V
9V
12V
15V
18V
24V
28V
GS18B48
48V
RATED CURRENT
3.0A
3.0A
2.0A
2.0A
1.50A
1.20A
1.0A
0.75A
0.64A
0.375A
CURRENT RANGE
0 ~ 3.0A
0 ~ 3.0A
0 ~ 2.0A
0 ~2.0A
0 ~ 1.50A
0 ~ 1.20A
0 ~ 1.0A
0 ~ 0.75A
0 ~ 0.64A
0 ~ 0.375A
RATED POWER (max.)
10W
15W
15W
18W
18W
18W
18W
18W
18W
18W
50mVp-p
80mVp-p
80mVp-p
80mVp-p
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
VOLTAGE TOLERANCE Note.4 5.0%
RIPPLE & NOISE (max.) Note.3 50mVp-p
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC
90 ~ 264VAC 135 ~ 370VDC
VOLTAGE RANGE
INPUT
geprUfre
Sicherheit
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
68%
AC CURRENT
INRUSH CURRENT (max.)
0.5A / 100VAC
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
73%
79%
500ms, 20ms, 15ms/115VAC at full load
79%
81%
81%
82%
84%
84%
85%
45A / 230VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode, output short
0 ~ +50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
SAFETY &
ISOLATION RESISTANCE
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B
(Note. 7)
HARMONIC CURRENT
Compliance to EN61000-3-2,3
OTHERS
CONNECTOR
NOTE
EMS IMMUNITY
MTBF
DIMENSION
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
PACKING
PLUG
500Khrs min. MIL-HDBK-217F(25 )
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested
CABLE
Standard type UL1185 6ft (4FT for 3.3 ~ 5V output) for stock ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:GS18B-SPEC 2008-05-08
GS18B
10~18W AC-DC Single Output Desktop
Mechanical Specification
series
Unit:mm
UL1185 16AWG 1230 50mm for 3.3~5V
UL1185 18AWG 1830 50mm for 7.5~48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
33
79
Standard plug: P1J (option)
54
P1J
OUTPUT
CENTER
+
Static Characteristics
Derating Curve
100
100
LOAD (%)
LOAD (%)
P/N
70
0
10
20
30
Ta (
40
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:GS18B-SPEC 2008-05-08
Similar pages