Kemet ESL106M035AC3AA Single-ended aluminum electrolytic capacitor Datasheet

Single-Ended Aluminum Electrolytic Capacitors
ESL Series, +105ºC
Overview
Applications
KEMET’s ESL Series of aluminum electrolytic single-ended
capacitors are designed for high reliability and long life (up
to 10,000 hours) applications.
Typical applications include LED drive source.
Benefits
• Long life, up to 10,000 hours
• Operating temperature of up to +105°C
• Safety vent on the capacitor base
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
ESL
106
M
016
A
C3
AA
Series
Capacitance
Code (pF)
Tolerance
Rated Voltage
(VDC)
Electrical
Parameters
Size Code
Packaging
See Dimension
Table
See Ordering
Options Table
Single-Ended
Aluminum
Electrolytic
First two digits
represent
significant
figures for
capacitance
values. Last
digit specifies
the number
of zeros to be
added.
M = ±20%
016 = 16
025 = 25
035 = 35
050 = 50
063 = 63
100 = 100
160 = 160
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
A = Standard
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
1
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Ordering Options Table
Diameter
Packaging Type
Lead Type
Lead Length
(mm)
Lead and
Packaging Code
Standard Bulk Packaging Options
4 – 22
Bulk (bag)
Straight
20/15 Minimum
AA
Standard Auto-Insertion Packaging Options
10 – 13
16 – 18
Ammo
5 mm Lead Spacing
H0 = 18.5±0.75
EA
Ammo
7.5 mm Lead Spacing
H0 = 18.5±0.75
EA
Other Packaging Options
4–8
4–8
4–5
Ammo
Formed to 5 mm
H0 = 16±0.75
DA
Ammo
Straight
H0 = 18.5±0.75
EA
Ammo
Formed to 2.5 mm
H0 = 16±0.75
FA
Contact KEMET for other Lead and Packaging options
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like
China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic
equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulfill
these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed
from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will
closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires
on the label.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
2
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Dimensions – Millimeters
TERMINAL END VIEW
SIDE VIEW
L
LL+
D
Size Code
C3
E3
GM
G9
G8
G6
GG
H9
H8
H4
H5
HB
HE
K7
K5
K1
K2
K3
K4
KB
M5
M7
M9
MP
M4
N5
N8
NA
N3
P
d
LL−
D
L
p
d
LL+/LL-
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
5
6.3
8
8
8
8
8
10
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
16
16
18
18
18
18
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
11
11
11.5
12
16
20
50
12.5
16
20
25
40
50
15
20
25
30
35
40
50
20
25
30
35
40
25
30
35
40
+1.5/-0
+1.5/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+1.5/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
+2.0/-0
2
2.0
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
5
5
5
5
5
5
5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
20/15
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
3
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Performance Characteristics
Item
Performance Characteristics
Capacitance Range
Capacitance Tolerance
0.47 – 6,800 µF
±20% at 120 Hz/20°C
16 – 100 VDC
Rated Voltage
Life Test
Operating Temperature
Leakage Current
160 – 450 VDC
8,000 – 10,000 hours (see conditions in Test Methods & Performance)
−40°C to +105°C
I ≤ 0.01 CV or 3 µA, whichever is greater
I ≤ 0.02 CV +10 µA
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 2 minutes at 20°C.
Impedance Z Characteristics at 120 Hz
Rated Voltage (VDC)
16
25
35
50
63
100
160
200
250
350
400
450
Z (−40°C)/Z (20°C)
8
6
6
6
4
4
6
6
6
7
7
9
Compensation Factor of Ripple Current (RC) vs. Frequency
Rated Voltage (VDC)
50 Hz
120 Hz
1 kHz
10 kHz
100 kHz
0.40
0.50
0.80
0.90
1.00
Coefficient
Test Method & Performance
Conditions
Load Life Test
Shelf Life Test
105°C
105°C
Temperature
16 – 100 VDC
Can Ø = 5 – 6 mm
8,000 hours
Can Ø ≥ 8 mm
10,000 hours
Test Duration
160 – 450 VDC
Ripple Current
Voltage
Performance
Capacitance Change
Dissipation Factor
Leakage Current
1,000 hours
10,000 hours
Maximum ripple current specified at 100 kHz 105°C
No ripple current
applied
The sum of DC voltage and the peak AC voltage must not exceed the rated
voltage of the capacitor
No voltage applied
The following specifications will be satisfied when the capacitor is restored to 20°C:
Within ±20% of the initial value
Does not exceed 200% of the specified value
Does not exceed specified value
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
4
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the
leakage current will very slowly increase.
KEMET's E-series aluminum electrolytic capacitors should not be stored in high temperatures or where there is a high level of
humidity.
The suitable storage condition for KEMET's E-series aluminum electrolytic capacitors is +5 to +35ºC and less than 75% in
relative humidity.
KEMET's E-series aluminum electrolytic capacitors should not be stored in damp conditions such as water, saltwater spray or
oil spray.
KEMET's E-series aluminum electrolytic capacitors should not be stored in an environment full of hazardous gas (hydrogen
sulphide , sulphurous acid gas, nitrous acid, chlorine gas, ammonium, etc.)
KEMET's E-series aluminum electrolytic capacitors should not be stored under exposure to ozone, ultraviolet rays or
radiation.
If a capacitor has been stored for more than 18 months under these conditions and it shows increased leakage current,
then a treatment by voltage application is recommended.
Re-age (Reforming) Procedure
Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen
to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage
current or 5 mA (whichever is greater) is suggested.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
5
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
25
25
25
25
25
25
25
25
25
25
25
25
25
25
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
32
32
32
32
32
32
32
32
32
32
32
32
32
32
10
15
22
33
39
47
56
68
100
120
150
180
220
270
330
390
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
10
15
22
33
39
47
56
68
100
120
150
180
220
270
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x16
10x12.5
8x16
10x12.5
8x20
10x16
8x20
10x16
10x20
12.5x15
10x20
12.5x15
10x25
12.5x20
12.5x20
12.5x25
12.5x30
16x20
12.5x30
16x20
12.5x35
16x25
16x30
18x25
16x30
18x25
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
18
18
20
20
20
20
22
22
24
24
26
26
14
14
14
14
14
14
14
14
14
14
14
14
14
14
150
155
170
185
225
245
280
305
345
485
510
525
555
870
920
940
960
1230
1340
1280
1340
1540
1770
1540
1770
1970
2340
1970
2340
2260
2490
2490
2710
2960
2960
3060
3060
3280
3240
3700
3660
3900
3860
160
170
185
200
225
315
335
355
485
525
555
875
905
965
3
3
3.52
5.28
6.24
7.52
8.96
10.88
16
19.2
24
28.8
35.2
43.2
52.8
62.4
75.2
89.6
89.6
108.8
108.8
131.2
131.2
160
160
192
192
240
240
288
288
352
432
528
528
624
624
752
752
896
896
1088
1088
3
3.75
5.5
8.25
9.75
11.75
14
17
25
30
37.5
45
55
67.5
ESL106M016AC3(1)
ESL156M016AC3(1)
ESL226M016AC3(1)
ESL336M016AC3(1)
ESL396M016AC3(1)
ESL476M016AC3(1)
ESL566M016AC3(1)
ESL686M016AC3(1)
ESL107M016AC3(1)
ESL127M016AE3(1)
ESL157M016AE3(1)
ESL187M016AE3(1)
ESL227M016AE3(1)
ESL277M016AGM(1)
ESL337M016AGM(1)
ESL397M016AGM(1)
ESL477M016AGM(1)
ESL567M016AG8(1)
ESL567M016AH9(1)
ESL687M016AG8(1)
ESL687M016AH9(1)
ESL827M016AG6(1)
ESL827M016AH8(1)
ESL108M016AG6(1)
ESL108M016AH8(1)
ESL128M016AH4(1)
ESL128M016AK7(1)
ESL158M016AH4(1)
ESL158M016AK7(1)
ESL188M016AH5(1)
ESL188M016AK5(1)
ESL228M016AK5(1)
ESL278M016AK1(1)
ESL338M016AK2(1)
ESL338M016AM5(1)
ESL398M016AK2(1)
ESL398M016AM5(1)
ESL478M016AK3(1)
ESL478M016AM7(1)
ESL568M016AM9(1)
ESL568M016AN5(1)
ESL688M016AM9(1)
ESL688M016AN5(1)
ESL106M025AC3(1)
ESL156M025AC3(1)
ESL226M025AC3(1)
ESL336M025AC3(1)
ESL396M025AC3(1)
ESL476M025AC3(1)
ESL566M025AC3(1)
ESL686M025AC3(1)
ESL107M025AE3(1)
ESL127M025AE3(1)
ESL157M025AE3(1)
ESL187M025AGM(1)
ESL227M025AGM(1)
ESL277M025AGM(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
6
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
330
390
390
470
560
560
680
820
820
1000
1000
1200
1500
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
6800
10
15
22
33
39
47
56
68
100
120
150
180
220
220
270
270
330
390
390
470
560
560
680
680
820
1000
1200
1500
1500
1800
8x11.5
8x16
10x12.5
10x12.5
8x20
10x16
10x16
10x20
12.5x15
10x25
12.5x20
12.5x20
12.5x20
12.5x25
12.5x30
16x20
12.5x35
16x25
12.5x40
16x25
16x30
18x25
16x35
18x30
18x35
18x40
5x11
5x11
5x11
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x16
10x12.5
8x16
10x12.5
10x12.5
8x20
10x16
10x16
10x20
12.5x15
10x25
12.5x20
12.5x20
12.5x20
12.5x25
12.5x30
16x20
12.5x35
14
14
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
18
18
18
18
20
20
22
24
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
965
1280
1340
1325
1540
1770
1770
2010
2010
2260
2260
2370
2490
2910
3460
3260
3580
3640
3900
3640
3900
3660
3840
4020
4090
4160
165
175
195
205
245
345
480
520
545
780
840
965
1020
1180
1050
1210
1340
1520
1650
1755
1970
2340
2260
2360
2490
2490
2910
3460
3260
3470
82.5
97.5
97.5
117.5
140
140
170
205
205
250
250
300
375
450
550
550
675
675
825
825
975
975
1175
1175
1400
1700
3.5
5.25
7.7
11.55
13.65
16.45
19.6
23.8
35
42
52.5
63
77
77
94.5
94.5
115.5
136.5
136.5
164.5
196
196
238
238
287
350
420
525
525
630
ESL337M025AGM(1)
ESL397M025AG8(1)
ESL397M025AH9(1)
ESL477M025AH9(1)
ESL567M025AG6(1)
ESL567M025AH8(1)
ESL687M025AH8(1)
ESL827M025AH4(1)
ESL827M025AK7(1)
ESL108M025AH5(1)
ESL108M025AK5(1)
ESL128M025AK5(1)
ESL158M025AK5(1)
ESL188M025AK1(1)
ESL228M025AK2(1)
ESL228M025AM5(1)
ESL278M025AK3(1)
ESL278M025AM7(1)
ESL338M025AK4(1)
ESL338M025AM7(1)
ESL398M025AM9(1)
ESL398M025AN5(1)
ESL478M025AMP(1)
ESL478M025AN8(1)
ESL568M025ANA(1)
ESL688M025AN3(1)
ESL106M035AC3(1)
ESL156M035AC3(1)
ESL226M035AC3(1)
ESL336M035AC3(1)
ESL396M035AC3(1)
ESL476M035AC3(1)
ESL566M035AE3(1)
ESL686M035AE3(1)
ESL107M035AE3(1)
ESL127M035AGM(1)
ESL157M035AGM(1)
ESL187M035AGM(1)
ESL227M035AG8(1)
ESL227M035AH9(1)
ESL277M035AG8(1)
ESL277M035AH9(1)
ESL337M035AH9(1)
ESL397M035AG6(1)
ESL397M035AH8(1)
ESL477M035AH8(1)
ESL567M035AH4(1)
ESL567M035AK7(1)
ESL687M035AH5(1)
ESL687M035AK5(1)
ESL827M035AK5(1)
ESL108M035AK5(1)
ESL128M035AK1(1)
ESL158M035AK2(1)
ESL158M035AM5(1)
ESL188M035AK3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
7
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
44
44
44
44
44
44
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
1800
2200
2700
2700
3300
3900
10
15
22
33
39
47
56
68
100
120
150
180
220
220
270
270
330
390
390
470
560
680
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
0.47
1
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
16x25
16x25
16x30
18x25
18x35
18x40
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x16
8x16
10x16
8x20
10x16
12.5x15
10x20
10x25
10x25
12.5x20
12.5x20
12.5x25
12.5x30
12.5x30
12.5x35
16x25
16x30
18x25
16x35
18x25
16x40
18x35
18x35
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
6.3x11
12
14
14
14
16
16
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
3580
3640
3540
3650
4090
4160
185
195
240
400
400
420
385
640
725
975
975
1380
1320
1380
1762
1590
1650
1880
2060
2050
2420
2860
2870
3050
3010
3290
3070
3050
3310
3440
3520
3580
80
95
95
105
105
115
115
120
135
135
145
145
155
165
265
295
305
335
630
770
945
945
1155
1365
5
7.5
11
16.5
19.5
23.5
28
34
50
60
75
90
110
110
135
135
165
195
195
235
280
340
410
500
500
600
600
750
750
900
900
1100
3
3
3
3
3
3
3
3
3.528
4.284
5.166
6.3
7.56
9.45
11.34
13.86
17.01
20.79
ESL188M035AM7(1)
ESL228M035AM7(1)
ESL278M035AM9(1)
ESL278M035AN5(1)
ESL338M035ANA(1)
ESL398M035AN3(1)
ESL106M050AC3(1)
ESL156M050AC3(1)
ESL226M050AC3(1)
ESL336M050AE3(1)
ESL396M050AE3(1)
ESL476M050AE3(1)
ESL566M050AE3(1)
ESL686M050AGM(1)
ESL107M050AGM(1)
ESL127M050AG8(1)
ESL157M050AG8(1)
ESL187M050AH8(1)
ESL227M050AG6(1)
ESL227M050AH8(1)
ESL277M050AK7(1)
ESL277M050AH4(1)
ESL337M050AH5(1)
ESL397M050AH5(1)
ESL397M050AK5(1)
ESL477M050AK5(1)
ESL567M050AK1(1)
ESL687M050AK2(1)
ESL827M050AK2(1)
ESL108M050AK3(1)
ESL108M050AM7(1)
ESL128M050AM9(1)
ESL128M050AN5(1)
ESL158M050AMP(1)
ESL158M050AN5(1)
ESL188M050AM4(1)
ESL188M050ANA(1)
ESL228M050ANA(1)
ESL474M063AC3(1)
ESL105M063AC3(1)
ESL185M063AC3(1)
ESL225M063AC3(1)
ESL275M063AC3(1)
ESL335M063AC3(1)
ESL395M063AC3(1)
ESL475M063AC3(1)
ESL565M063AC3(1)
ESL685M063AC3(1)
ESL825M063AC3(1)
ESL106M063AC3(1)
ESL126M063AC3(1)
ESL156M063AC3(1)
ESL186M063AE3(1)
ESL226M063AE3(1)
ESL276M063AE3(1)
ESL336M063AE3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
8
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
39
47
56
68
82
100
100
120
150
150
180
220
220
270
270
330
330
390
470
560
560
680
680
820
820
1000
1200
1200
1500
1500
1800
2200
0.47
1
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
27
33
33
39
47
56
68
8x11.5
8x11.5
8x11.5
8x11.5
8x16
8x16
10x12.5
10x12.5
8x20
10x16
10x16
10x20
12.5x15
10x20
12.5x15
10x25
12.5x20
12.5x20
12.5x25
12.5x30
16x20
12.5x35
16x25
12.5x40
16x25
16x30
16x30
18x25
16x35
18x30
16x40
18x40
5x11
5x11
5x11
5x11
5x11
5x11
5x11
5x11
6.3x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x16
10x12.5
8x16
10x12.5
10x12.5
10x12.5
10x12.5
8x20
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
420
435
445
460
560
580
570
580
680
705
725
1050
1020
1080
1045
1250
1320
1350
1860
2050
1980
2250
2315
2430
2480
2620
2650
2610
2730
2780
3250
3430
95
105
105
115
115
125
135
145
205
235
255
280
320
320
345
365
455
460
465
475
485
510
540
675
24.57
29.61
35.28
42.84
51.66
63
63
75.6
94.5
94.5
113.4
138.6
138.6
170.1
170.1
207.9
207.9
245.7
296.1
352.8
352.8
428.4
428.4
516.6
516.6
630
756
756
945
945
1134
1386
3
3
3
3
3
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
27
33
33
39
47
56
68
ESL396M063AGM(1)
ESL476M063AGM(1)
ESL566M063AGM(1)
ESL686M063AGM(1)
ESL826M063AG8(1)
ESL107M063AG8(1)
ESL107M063AH9(1)
ESL127M063AH9(1)
ESL157M063AG6(1)
ESL157M063AH8(1)
ESL187M063AH8(1)
ESL227M063AH4(1)
ESL227M063AK7(1)
ESL277M063AH4(1)
ESL277M063AK7(1)
ESL337M063AH5(1)
ESL337M063AK5(1)
ESL397M063AK5(1)
ESL477M063AK1(1)
ESL567M063AK2(1)
ESL567M063AM5(1)
ESL687M063AK3(1)
ESL687M063AM7(1)
ESL827M063AK4(1)
ESL827M063AM7(1)
ESL108M063AM9(1)
ESL128M063AM9(1)
ESL128M063AN5(1)
ESL158M063AMP(1)
ESL158M063AN8(1)
ESL188M063AM4(1)
ESL228M063AN3(1)
ESL474M100AC3(1)
ESL105M100AC3(1)
ESL185M100AC3(1)
ESL225M100AC3(1)
ESL275M100AC3(1)
ESL335M100AC3(1)
ESL395M100AC3(1)
ESL475M100AC3(1)
ESL565M100AE3(1)
ESL685M100AE3(1)
ESL825M100AE3(1)
ESL106M100AE3(1)
ESL126M100AGM(1)
ESL156M100AGM(1)
ESL186M100AGM(1)
ESL226M100AGM(1)
ESL276M100AG8(1)
ESL276M100AH9(1)
ESL336M100AG8(1)
ESL336M100AH9(1)
ESL396M100AH9(1)
ESL476M100AH9(1)
ESL566M100AH9(1)
ESL686M100AG6(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
9
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
200
200
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
82
100
100
120
150
180
220
270
270
330
330
390
470
560
560
680
680
820
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
15
18
22
22
27
33
33
39
39
47
47
56
56
68
82
100
100
120
150
150
180
220
270
330
2.2
2.7
10x16
10x20
12.5x15
10x25
12.5x20
12.5x25
12.5x25
12.5x30
16x20
12.5x35
16x25
12.5x40
16x30
16x35
18x30
16x40
18x35
18x40
6.3x11
6.3x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x16
8x16
8x16
10x12.5
8x16
8x20
10x16
10x16
10x20
12.5x15
10x25
12.5x15
10x25
12.5x20
12.5x20
8x50
12.5x20
12.5x25
16x20
10x50
16x25
16x30
12.5x50
16x30
18x30
18x35
18x40
6.3x11
6.3x11
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
785
865
845
1050
1440
1460
1630
1620
1650
1950
1920
2050
2010
2430
2480
2680
2870
3250
65
70
75
80
85
85
100
105
115
135
140
285
290
310
390
390
410
530
570
590
590
610
630
740
740
800
830
1120
1210
1240
1280
1280
1360
1410
1500
1590
75
80
82
100
100
120
150
180
220
270
270
330
330
390
470
560
560
680
680
820
15.76
17.04
18.64
20.56
22.48
25.04
27.92
31.76
36.24
42
48.4
58
58
67.6
80.4
80.4
96.4
115.6
115.6
134.8
134.8
160.4
160.4
189.2
189.2
227.6
272.4
330
330
394
490
490
586
714
874
1066
18.8
20.8
ESL826M100AH8(1)
ESL107M100AH4(1)
ESL107M100AK7(1)
ESL127M100AH5(1)
ESL157M100AK5(1)
ESL187M100AK1(1)
ESL227M100AK1(1)
ESL277M100AK2(1)
ESL277M100AM5(1)
ESL337M100AK3(1)
ESL337M100AM7(1)
ESL397M100AK4(1)
ESL477M100AM9(1)
ESL567M100AMP(1)
ESL567M100AN8(1)
ESL687M100AM4(1)
ESL687M100ANA(1)
ESL827M100AN3(1)
ESL185M160AE3(1)
ESL225M160AE3(1)
ESL275M160AE3(1)
ESL335M160AE3(1)
ESL395M160AE3(1)
ESL475M160AGM(1)
ESL565M160AGM(1)
ESL685M160AGM(1)
ESL825M160AGM(1)
ESL106M160AG8(1)
ESL126M160AG8(1)
ESL156M160AG8(1)
ESL156M160AH9(1)
ESL186M160AG8(1)
ESL226M160AG6(1)
ESL226M160AH8(1)
ESL276M160AH8(1)
ESL336M160AH4(1)
ESL336M160AK7(1)
ESL396M160AH5(1)
ESL396M160AK7(1)
ESL476M160AH5(1)
ESL476M160AK5(1)
ESL566M160AK5(1)
ESL566M160AGG(1)
ESL686M160AK5(1)
ESL826M160AK1(1)
ESL107M160AM5(1)
ESL107M160AHE(1)
ESL127M160AM7(1)
ESL157M160AM9(1)
ESL157M160AKB(1)
ESL187M160AM9(1)
ESL227M160AN8(1)
ESL277M160ANA(1)
ESL337M160AN3(1)
ESL225M200AE3(1)
ESL275M200AE3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
10
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
350
350
350
350
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
400
400
400
400
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
47
56
56
68
82
100
120
150
180
220
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
10
15
15
18
22
33
33
47
56
68
68
82
100
100
120
150
180
220
1
1.2
1.5
1.8
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x12
8x16
8x16
10x16
10x16
10x20
10x25
12.5x20
12.5x20
8x50
12.5x25
10x50
12.5x30
16x25
16x25
16x30
16x35
18x30
18x35
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x12
8x16
10x12.5
8x20
10x16
10x16
10x20
12.5x20
8x50
12.5x25
12.5x30
12.5x30
10x50
16x30
16x30
12.5x50
18x30
18x30
18x35
18x40
6.3x11
6.3x11
6.3x11
6.3x11
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
95
105
130
135
145
165
175
190
360
385
390
410
530
620
630
650
670
670
850
860
930
1090
1125
1340
1420
80
90
100
110
135
150
160
170
250
250
380
390
410
475
570
570
650
750
870
870
910
960
960
1210
1400
1540
1620
55
55
60
65
23.2
25.6
28.8
32.4
37.2
42.8
50
58
70
82
98
118
142
166
198
198
234
234
282
338
410
490
610
730
890
21
23.5
26.5
29.5
33.5
38
44
51
60
60
85
85
100
120
175
175
245
290
350
350
420
510
510
610
760
910
1110
17
18.4
20.5
22.6
ESL335M200AE3(1)
ESL395M200AE3(1)
ESL475M200AGM(1)
ESL565M200AGM(1)
ESL685M200AGM(1)
ESL825M200AGM(1)
ESL106M200AG9(1)
ESL126M200AG8(1)
ESL156M200AG8(1)
ESL186M200AH8(1)
ESL226M200AH8(1)
ESL276M200AH4(1)
ESL336M200AH5(1)
ESL396M200AK5(1)
ESL476M200AK5(1)
ESL476M200AGG(1)
ESL566M200AK1(1)
ESL566M200AHE(1)
ESL686M200AK2(1)
ESL826M200AM7(1)
ESL107M200AM7(1)
ESL127M200AM9(1)
ESL157M200AMP(1)
ESL187M200AN8(1)
ESL227M200ANA(1)
ESL225M250AE3(1)
ESL275M250AE3(1)
ESL335M250AE3(1)
ESL395M250AGM(1)
ESL475M250AGM(1)
ESL565M250AGM(1)
ESL685M250AGM(1)
ESL825M250AG9(1)
ESL106M250AG8(1)
ESL106M250AH9(1)
ESL156M250AG6(1)
ESL156M250AH8(1)
ESL186M250AH8(1)
ESL226M250AH4(1)
ESL336M250AK5(1)
ESL336M250AGG(1)
ESL476M250AK1(1)
ESL566M250AK2(1)
ESL686M250AK2(1)
ESL686M250AHE(1)
ESL826M250AM9(1)
ESL107M250AM9(1)
ESL107M250AKB(1)
ESL127M250AN8(1)
ESL157M250AN8(1)
ESL187M250ANA(1)
ESL227M250AN3(1)
ESL105M350AE3(1)
ESL125M350AE3(1)
ESL155M350AE3(1)
ESL185M350AE3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
11
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
450
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
500
2.2
2.7
3.3
3.9
4.7
5.6
5.6
6.8
8.2
8.2
10
15
15
18
18
22
22
33
33
47
56
68
68
82
100
120
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
4.7
5.6
5.6
6.8
6.8
8.2
10
15
18
22
22
33
33
47
56
56
68
82
82
100
1
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x16
10x12.5
10x12.5
8x20
10x16
10x16
10x25
12.5x15
10x25
12.5x20
12.5x20
8x50
12.5x25
10x50
16x25
16x30
18x25
12.5x50
18x30
18x35
18x35
6.3x11
6.3x11
6.3x11
6.3x11
8x11.5
8x11.5
8x11.5
8x11.5
8x11.5
8x16
8x16
10x12.5
8x20
10x16
10x16
10x20
12.5x20
12.5x20
12.5x25
8x50
16x25
10x50
18x25
16x30
12.5x50
18x30
16x40
18x35
18x40
6.3x11
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
70
85
95
100
130
155
155
170
240
240
250
340
340
430
430
475
475
570
570
800
840
880
880
940
1120
1200
65
70
75
85
90
95
100
105
110
115
160
180
180
220
252
288
400
470
475
475
610
610
795
820
820
910
980
980
1100
50
25.4
28.9
33.1
37.3
42.9
49.2
49.2
57.6
67.4
67.4
80
115
115
136
136
164
164
241
241
339
402
486
486
584
710
850
18
19.6
22
24.4
27.6
31.6
36.4
41.2
47.6
47.6
54.8
54.8
64.4
64.4
75.6
90
130
154
186
186
274
274
386
458
458
554
666
666
810
19
ESL225M350AE3(1)
ESL275M350AGM(1)
ESL335M350AGM(1)
ESL395M350AGM(1)
ESL475M350AGM(1)
ESL565M350AG8(1)
ESL565M350AH9(1)
ESL685M350AH9(1)
ESL825M350AG6(1)
ESL825M350AH8(1)
ESL106M350AH8(1)
ESL156M350AH5(1)
ESL156M350AK7(1)
ESL186M350AH5(1)
ESL186M350AK5(1)
ESL226M350AK5(1)
ESL226M350AGG(1)
ESL336M350AK1(1)
ESL336M350AHE(1)
ESL476M350AM7(1)
ESL566M350AM9(1)
ESL686M350AN5(1)
ESL686M350AKB(1)
ESL826M350AN8(1)
ESL107M350ANA(1)
ESL127M350ANA(1)
ESL105M400AE3(1)
ESL125M400AE3(1)
ESL155M400AE3(1)
ESL185M400AE3(1)
ESL225M400AGM(1)
ESL275M400AGM(1)
ESL335M400AGM(1)
ESL395M400AGM(1)
ESL475M400AGM(1)
ESL475M400AG8(1)
ESL565M400AG8(1)
ESL565M400AH9(1)
ESL685M400AG6(1)
ESL685M400AH8(1)
ESL825M400AH8(1)
ESL106M400AH4(1)
ESL156M400AK5(1)
ESL186M400AK5(1)
ESL226M400AK1(1)
ESL226M400AGG(1)
ESL336M400AM7(1)
ESL336M400AHE(1)
ESL476M400AN5(1)
ESL566M400AM9(1)
ESL566M400AKB(1)
ESL686M400AN8(1)
ESL826M400AM4(1)
ESL826M400ANA(1)
ESL107M400AN3(1)
ESL105M450AE3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
12
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Table 1 – Ratings & Part Number Reference cont'd
VDC
VDC Surge
Voltage
Rated
Capacitance
120 Hz 20°C
(µF)
Case Size
D x L (mm)
DF
120 Hz
20°C
(tan δ %)*
RC
100 kHz
105°C
(mA)
LC
20°C
2 Minutes
(µA)
Part Number
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
4.7
5.6
5.6
6.8
8.2
10
10
15
15
18
22
22
33
33
47
47
56
68
82
6.3x11
8x11.5
8x11.5
8x16
8x16
8x16
8x16
8x20
10x16
8x20
10x16
10x16
10x20
10x25
12.5x20
12.5x20
8x50
12.5x25
16x20
10x40
16x25
10x50
16x35
12.5x50
16x35
18x35
18x40
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
55
80
85
95
100
110
120
150
150
180
180
220
265
305
305
400
400
470
550
550
665
665
730
730
750
970
1030
20.8
23.5
26.2
29.8
34.3
39.7
45.1
52.3
52.3
60.4
60.4
71.2
83.8
100
100
145
145
172
208
208
307
307
433
433
514
622
748
ESL125M450AE3(1)
ESL155M450AGM(1)
ESL185M450AGM(1)
ESL225M450AG8(1)
ESL275M450AG8(1)
ESL335M450AG8(1)
ESL395M450AG8(1)
ESL475M450AG6(1)
ESL475M450AH8(1)
ESL565M450AG6(1)
ESL565M450AH8(1)
ESL685M450AH8(1)
ESL825M450AH4(1)
ESL106M450AH5(1)
ESL106M450AK5(1)
ESL156M450AK5(1)
ESL156M450AGG(1)
ESL186M450AK1(1)
ESL226M450AM5(1)
ESL226M450AHB(1)
ESL336M450AM7(1)
ESL336M450AHE(1)
ESL476M450AMP(1)
ESL476M450AKB(1)
ESL566M450AMP(1)
ESL686M450ANA(1)
ESL826M450AN3(1)
VDC
VDC Surge
Rated
Capacitance
Case Size
DF
RC
LC
Part Number
(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
13
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Mounting Positions (Safety Vent)
In operation, electrolytic capacitors will always conduct a leakage current which causes electrolysis. The oxygen produced by
electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal pressure
of the capacitor to increase. The overpressure vent (safety vent) ensures that the gas can escape when the pressure reaches
a certain value. All mounting positions must allow the safety vent to work properly.
Installing
• A general principle is that lower-use temperatures result in a longer, useful life of the capacitor. For this reason, it should
be ensured that electrolytic capacitors are placed away from heat-emitting components. Adequate space should be
allowed between components for cooling air to circulate, particularly when high ripple current loads are applied. In any
case, the maximum category temperature must not be exceeded.
• Do not deform the case of capacitors or use capacitors with a deformed case.
• Verify that the connections of the capacitors are able to insert on the board without excessive mechanical force.
• If the capacitors require mounting through additional means, the recommended mounting accessories shall be used.
• Verify the correct polarization of the capacitor on the board.
• Verify that the space around the pressure relief device is according to the following guideline:
Case Diameter
Space Around Safety Vent
≤ 16 mm
> 2 mm
> 16 to ≤ 40 mm
> 3 mm
> 40 mm
> 5 mm
It is recommended that capacitors always be mounted with the safety device uppermost or in the upper part of the capacitor.
• If the capacitors are stored for a long time, the leakage current must be verified. If the leakage current is superior to the
value listed in this catalog, the capacitors must be reformed. In this case, they can be reformed by application of the rated
voltage through a series resistor approximately 1 kΩ for capacitors with VR ≤ 160 V (5 W resistor) and 10 kΩ for the other
rated voltages.
• In the case of capacitors connected in series, a suitable voltage sharing must be used.
In the case of balancing resistors, the approximate resistance value can be calculated as: R = 60/C
KEMET recommends, nevertheless, to ensure that the voltage across each capacitor does not exceed its rated voltage.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
14
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Application and Operation Guidelines
Electrical Ratings:
Capacitance (ESC)
Simplified equivalent circuit diagram of an electrolytic capacitor
The capacitive component of the equivalent series circuit (Equivalent Series Capacitance ESC) is determined by applying an
alternate voltage of ≤ 0.5 V at a frequency of 120 or 100 Hz and 20°C (IEC 384-1, 384-4).
Capacitance Change vs. Temperature
(typical value)
Capacitance Change (%)
Temperature Dependence of the Capacitance
Capacitance of an electrolytic capacitor depends upon
temperature: with decreasing temperature the viscosity
of the electrolyte increases, thereby reducing its
conductivity.
Capacitance will decrease if temperature decreases.
Furthermore, temperature drifts cause armature
dilatation and, therefore, capacitance changes (up to 20%
depending on the series considered, from 0 to 80°C). This
phenomenon is more evident for electrolytic capacitors
than for other types.
Temperature (°C)
Frequency Dependence of the Capacitance
Effective capacitance value is derived from the impedance
curve, as long as impedance is still in the range where the
capacitance component is dominant.
1
2π fZ
C = Capacitance (F)
f = Frequency (Hz)
Z = Impedance (Ω)
(typical value)
Capacitance Change (%)
C=
Capacitance Change vs. Frequency
Frequency (kHz)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
15
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Dissipation Factor tan δ (DF)
Dissipation Factor tan δ is the ratio between the active and reactive power for a sinusoidal waveform voltage. It can be
thought of as a measurement of the gap between an actual and ideal capacitor.
reactive
ideal
δ
actual
active
Tan δ is measured with the same set-up used for the series capacitance ESC.
tan δ = ω x ESC x ESR where:
ESC = Equivalent Series Capacitance
ESR = Equivalent Series Resistance
Dissipation Factor vs. Frequency
Dissipation Factor (%)
(typical value)
Frequency (kHz)
Dissipation Factor vs. Temperature
Dissipation Factor (%)
(typical value)
Temperature (°C)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
16
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Equivalent Series Inductance (ESL)
Equivalent Series Inductance or Self Inductance results from the terminal configuration and internal design of the capacitor.
Capacitor Equivalent Internal Circuit
Equivalent
Series
Capacitance
(ESC)
Equivalent
Series
Resistance
(ESR)
Equivalent
Series
Inductance
(ESL)
Equivalent Series Resistance (ESR)
Equivalent Series Resistance is the resistive component of the equivalent series circuit. ESR value depends on frequency and
temperature and is related to the tan δ by the following equation:
ESR =
tan δ
2πf ESC
ESR = Equivalent Series Resistance (Ω)
tan δ = Dissipation Factor
ESC = Equivalent Series Capacitance (F)
f = Frequency (Hz)
Tolerance limits of the rated capacitance must be taken into account when calculating this value.
ESR Change vs. Frequency
ESR (Ω)
(typical value)
Frequency (kHz)
ESR Change vs. Temperature
ESR (Ω)
(typical value)
Temperature (°C)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
17
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
L
Re
Co
Impedance (Z)
Impedance of an electrolytic capacitor results from a circuit formed by the following individual equivalent series
components:
Co
Re
L
Ce
Ce
Co = Aluminum oxide capacitance (surface and thickness of the dielectric)
Re = Resistance of electrolyte and paper mixture (other resistances not depending on the frequency are not considered: tabs,
plates, etc.)
Ce = Electrolyte soaked paper capacitance
L = Inductive reactance of the capacitor winding and terminals
Impedance of an electrolytic capacitor is not a constant quantity that retains its value under all conditions; it changes
depending on frequency and temperature.
Impedance as a function of frequency (sinusoidal waveform) for a certain temperature can be represented as follows:
Z [ohm ]
1,000
100
1/ω
ω Ce
10
B
Re
1
0.1
ωL
A
1/ω
ω Co
0.1
1
10
C
100
1,000
10,000
F [K Hz]
• Capacitive reactance predominates at low frequencies
• With increasing frequency, capacitive reactance Xc = 1/ωCo decreases until it reaches the order of magnitude of
electrolyte resistance Re(A)
• At even higher frequencies, resistance of the electrolyte predominates: Z = Re (A - B)
• When the capacitor’s resonance frequency is reached (ω0), capacitive and inductive reactance mutually cancel each other
1/ωCe = ωL, ω0 = C√1/LCe
• Above this frequency, inductive reactance of the winding and its terminals (XL = Z = ωL) becomes effective and leads to
an increase in impedance
Generally speaking, it can be estimated that Ce ≈ 0.01 Co.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
18
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Impedance (Z) cont’d
Impedance as a function of frequency (sinusoidal waveform) for different temperature values can be represented as follows
(typical values):
Z (ohm)
10 µF
1,000
100
-40°C
10
20°C
85°C
1
0.1
0.1
1
10
100
1,000
10,000
F (K H z)
Re is the most temperature-dependent component of an electrolytic capacitor equivalent circuit. Electrolyte resistivity will
decrease if temperature rises.
In order to obtain a low impedance value throughout the temperature range, Re must be as little as possible. However, Re
values that are too low indicate a very aggressive electrolyte, resulting in a shorter life of the electrolytic capacitor at high
temperatures. A compromise must be reached.
Leakage Current (LC)
Due to the aluminum oxide layer that serves as a dielectric, a small current will continue to flow even after a DC voltage has
been applied for long periods. This current is called leakage current.
A high leakage current flows after applying voltage to the capacitor then decreases in a few minutes, e.g., after prolonged
storage without any applied voltage. In the course of continuous operation, the leakage current will decrease and reach an
almost constant value.
After a voltage-free storage the oxide layer may deteriorate, especially at high temperature. Since there are no leakage
currents to transport oxygen ions to the anode, the oxide layer is not regenerated. The result is that a higher than normal
leakage current will flow when voltage is applied after prolonged storage.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
19
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Leakage Current (LC) cont’d
As the oxide layer is regenerated in use, the leakage current will
gradually decrease to its normal level.
The relationship between the leakage current and voltage applied
at constant temperature can be shown schematically as follows:
I
Where:
VF = Forming voltage
If this level is exceeded, a large quantity of heat and gas will be
generated and the capacitor could be damaged.
VR = Rated Voltage
This level represents the top of the linear part of the curve.
VS = Surge voltage
This lies between VR and VF. The capacitor can be subjected to VS for short periods only.
VR
VS
VF
V
Electrolytic capacitors are subjected to a reforming process before acceptance testing. The purpose of this preconditioning
is to ensure that the same initial conditions are maintained when comparing different products.
Ripple Current (RC)
The maximum ripple current value depends on:
• Ambient temperature
• Surface area of the capacitor (heat dissipation area)
tan δ or ESR
• Frequency
The capacitor’s life depends on the thermal stress.
Frequency Dependence of the Ripple Current
ESR and, thus, the tan δ depend on the frequency of the applied voltage. This indicates that the allowed ripple current is also
a function of the frequency.
Temperature Dependence of the Ripple Current
The data sheet specifies maximum ripple current at the upper category temperature for each capacitor.
Expected Life Calculation Chart
Actual Operating Temperature (C°)
Expected Life Calculation
Expected life depends on operating temperature according
to the following formula: L = Lo x 2 (To-T)/10
Where:
L:
Expected life
Lo:
Load life at maximum permissible operating
temperature
T:
Actual operating temperature
To:
Maximum permissible operating temperature
This formula is applicable between 40°C and To.
Expected life (h)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
20
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Packaging Quantities
Size
Code
Diameter
(mm)
Length
(mm)
C3
5
6.3
8
8
8
8
8
10
10
Bulk
Auto-insertion
Standard
Leads
Cut Leads
Ammo
Tape & Reel
11
11
11.5
12
16
20
50
12.5
16
10,000
10,000
6,000
6,000
5,000
4,000
2,400
4,000
3,000
15,000
15,000
8,000
8,000
5,000
4,000
2,400
4,000
4,000
2,000
2,000
1,000
1,000
1,000
1,000
700
700
-
20
25
40
50
15
20
25
30
35
40
50
20
25
30
35
40
25
30
35
2,400
2,400
2,100
2,100
2,000
2,000
2,000
2,000
2,000
2,000
1,200
1,000
1,000
800
600
600
800
800
500
3,000
2,400
2,100
2,100
2,000
2,000
2,000
2,000
2,000
2,000
1,200
500
500
500
500
500
500
500
500
700
500
500
500
500
500
500
500
300
300
300
300
300
300
-
-
NA
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
16
16
18
18
18
N3
18
40
500
500
-
-
E3
GM
G9
G8
G6
GG
H9
H8
H4
H5
HB
HE
K7
K5
K1
K2
K3
K4
KB
M5
M7
M9
MP
M4
N5
N8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
-
A4074_ESL • 1/27/2017
21
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Marking
KEMET Logo
Polarity Stripe (−)
Rated Capacitance
Rated Voltage
(VDC)
Date Code
Series, Rated
Temperature
Month*/Year*
Manufacturing
Internal Codes
*Y = Year
Code
01
02
03
04
05
06
07
08
09
Year
2011
2012
2013
2014
2015
2016
2017
2018
2019
*M = Month
Code
01
02
03
04
05
06
07
08
09
10
11
12
Month
1
2
3
4
5
6
7
8
9
10
11
12
Construction
Insulating End Disc
Insulating Sleeve
Lead
Aluminum Can
with Safety Vent
Detailed Cross Section
Rubber Seal
Terminal Tab
Terminal Tabs
Margin
Aluminum Can
Insulating Sleeve
Polarity Stripe (−)
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Paper Spacer Impregnated
with Electrolyte
Rubber Seal
(Third Layer)
Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
Cathode Aluminum Foil,
(Second Layer)
Etched (Fourth Layer)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
Lead (+)
Lead (−)
A4074_ESL • 1/27/2017
22
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Taping for Automatic Insertion Machines
Formed to 5 mm
(Lead and packaging code JA and DA)
+1.0
-1.0
D
L
1.0 Maximum
t
D0
Mounting tape
Adhesive tape
d
P0
Straight Leads (Diameter: 4 – 8 mm)
Lead and packaging code EA and KA
P2
P2
1.0 Maximum
P1
Tolerance
+0.5
Formed to
2.5 mm
4
5
4
5
Formed to
5 mm
6
8
4
5
6
Straight leads
8
10
12
13
16
18
L
p
L
d
d
P0
P1
P2
1.0 Maximum
W1
W
t
W0
P0
D0
Mounting tape
Adhesive tape
P
p
W
W0
W
D
+1.0
-1.0
H
W2
W1
t
I
P0
Dimensions
(mm)
P
L
p
t
D0
Mounting tape
Adhesive tape
d
D
H
H
Straight Leads (Diameter > 8)
Lead and packaging code EA and KA
+1.0
-1.0
P
D
P1
1.0 Maximum
p
W
W0
W1
W
P0
P1
W0
H
L
W1
p
H0
P1
+1.0
-1.0
P
H0
D
P2
W2
P
W2
P2
W2
Formed to 2.5 mm
(Lead and packaging code LA and FA)
W0
D0
Mounting tape
Adhesive tape
d
W1
W2
H0
H1
I
D0
t
+0.8/-0.2 ±0.05 ±1 .0 ±0 .3 ±0 .7 ±1 .3 +1/-0.5 ±0.5 Maximum Maximum ±0.75 ±0.5 Maximum ±0.2 ±0.2
5-7
≤7
>7
5-7
≤7
>7
≤7
>7
≤7
>7
5-7
≤7
>7
≤7
>7
≤7
>7
12-25
15-25
2.5
2.5
2.5
5
5
5
5
5
5
5
1.5
2
2
2.5
2.5
3.5
3.5
5
5
5
5
7.5
7.5
0.45
0.45
0.5
0.45
0.45
0.5
0.5
0.5
0.5
0.5
0.45
0.45
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
15
15
15
30
30
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
15
15
15
30
30
5.1
5.1
5.1
3.85
3.85
3.85
3.85
3.85
3.85
3.85
5.6
5.35
5.35
5.1
5.1
4.6
4.6
3.85
3.85
3.85
3.85
3.75
3.75
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
7.5
7.5
7.5
7.5
7.5
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
16
16
16
16
16
16
16
16
16
16
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
1
1
1
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
1
1
1
1
1
1
A4074_ESL • 1/27/2017
23
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Lead Taping & Packaging
Ammo Box
Reel
D
H
T
Case Size (mm)
4
5x5–7
6.3 x 5 – 7
8x5–9
5 x 11
6.3 x 11
8 x 11
8 x 14 – 20
10 x 12
10 x 15 – 19
10 x 22 – 25
12
13
16
H
W
W
H
230
230
275
235
230
270
235
240
250
256
250
270
285
265
Ammo
W
T
Maximum
Maximum
340
340
340
340
340
340
340
340
340
340
340
340
340
340
42
42
42
45
48
48
48
57
52
57
60
57
62
62
D
Reel
H
W
±2
±0.5
+1/-0.1
350
30
50
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
24
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are
attached to each foil to provide the electrical contact.
Extended cathode
Anode foil
The deck, complete with terminals, is attached to the tabs and then
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte.
Each capacitor is aged and tested before being sleeved and packed.
The purpose of aging is to repair any damage in the oxide layer
and thus reduce the leakage current to a very low level. Aging is
normally carried out at the rated temperature of the capacitor and
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours to
complete.
Damage to the oxide layer can occur due to variety of reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
A sample from each batch is taken by the quality department after
completion of the production process. This sample size is controlled
by the use of recognized sampling tables defined in BS 6001.
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action.
Electrical:
• Leakage current
• Capacitance
• ESR
• Impedance
• Tan Delta
Mechanical/Visual:
• Overall dimensions
• Torque test of mounting stud
• Print detail
• Box labels
• Packaging, including packed
quantity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
Foil tabs
Tissues
Cathode foil
Etching
Forming
Winding
Decking
Impregnation
Assembly
Aging
Testing
Sleeving
Packing
A4074_ESL • 1/27/2017
25
Single-Ended Aluminum Electrolytic Capacitors – ESL Series, +105ºC
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4074_ESL • 1/27/2017
26