Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FC Type : V Low impedance FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 22 j FC Capacitance (µF) L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. K Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D + 0.1 4.3 5.5 max. B 4.0 5.4 - 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 0D L Size code 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 4 4 4 5 6.3 8 8 10 10 10 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G B B B C D E F G G G Ripple Impedance tan d current (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 60 3.00 0.26 95 1.80 0.26 140 1.00 0.26 140 1.00 0.26 230 0.40 0.26 450 0.30 0.26 670 0.15 0.26 670 0.15 0.26 95 1.80 0.19 230 0.40 0.19 230 0.40 0.19 450 0.30 0.19 670 0.15 0.19 670 0.15 0.19 60 3.00 0.16 95 1.80 0.16 140 1.00 0.16 230 0.40 0.16 230 0.40 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 60 3.00 0.14 140 1.00 0.14 140 1.00 0.14 230 0.40 0.14 450 0.30 0.14 450 0.30 0.14 670 0.15 0.14 670 0.15 0.14 670 0.15 0.14 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 95 1.80 0.12 95 1.80 0.12 140 1.00 0.12 230 0.40 0.12 230 0.40 0.12 670 0.15 0.12 670 0.15 0.12 670 0.15 0.12 30 5.00 0.12 30 5.00 0.12 30 5.00 0.12 50 3.00 0.12 70 2.00 0.12 120 0.70 0.12 300 0.60 0.12 500 0.30 0.12 500 0.30 0.12 500 0.30 0.12 Min. Packaging Q'ty Part No. EEEFC0J220R EEEFC0J470R EEEFC0J680P EEEFC0J101P EEEFC0J221P EEEFC0J331P EEEFC0J102P EEEFC0J152P EEEFC1A330R EEEFC1A101P EEEFC1A151P EEEFC1A221P EEEFC1A471P EEEFC1A102P EEEFC1C100R EEEFC1C220R EEEFC1C470P EEEFC1C680P EEEFC1C101P EEEFC1C221P EEEFC1C331P EEEFC1C471P EEEFC1C681P EEEFC1E6R8R EEEFC1E220P EEEFC1E330P EEEFC1E470P EEEFC1E680P EEEFC1E101P EEEFC1E221P EEEFC1E331P EEEFC1E471P EEEFC1V1R0R EEEFC1V2R2R EEEFC1V3R3R EEEFC1V4R7R EEEFC1V6R8R EEEFC1V100R EEEFC1V220P EEEFC1V330P EEEFC1V470P EEEFC1V101P EEEFC1V221P EEEFC1V331P EEEFC1H1R0R EEEFC1H2R2R EEEFC1H3R3R EEEFC1H4R7R EEEFC1H100P EEEFC1H220P EEEFC1H330P EEEFC1H470P EEEFC1H101P EEEFC1H221P Reflow Taping (pcs) (1) (1) (1) (1) (2) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 2000 2000 2000 1000 1000 1000 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016