ID100 LOW LEAKAGE PICO-AMP DUAL DIODE Linear Systems replaces discontinued Intersil ID100 The ID100 is a low leakage Monolithic Dual Pico-Amp Diode The ID100 low-leakage monolithic dual diode provides a superior alternative to conventional diode technology when reverse current (leakage) must be minimized. In addition the monolithic dual construction allows excellent capacitance matching per diode. The ID100 features a leakage current of 0.1 pA and is well suited for use in applications such as input protection for operational amplifiers. Maximum Temperatures Storage Temperature Operating Junction Temperature Maximum Power Dissipation Continuous Power Dissipation Maximum Currents Forward Current Reverse Current Maximum Voltages Reverse Voltage Diode to Diode Voltage ID100 Benefits: Negligible Circuit Leakage Contribution Circuit “Transparent” Except to Shunt High-Frequency Spikes Simplicity of Operation ID100 Applications: FEATURES DIRECT REPLACEMENT FOR INTERSIL ID100 REVERSE LEAKAGE CURRENT REVERSE BREAKDOWN VOLTAGE REVERSE CAPACITANCE ABSOLUTE MAXIMUM RATINGS (Note 1) @ 25°C (unless otherwise noted) Op Amp Input Protection Multiplexer Overvoltage Protection ID100 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTICS MIN. TYP. BVR Reverse Breakdown Voltage 30 ‐‐ VF Forward Voltage 0.8 ‐‐ IR Reverse Leakage Current ‐‐ 0.1 ‐‐ 2.0 |IR1‐IR2| Differential Leakage Current ‐‐ ‐‐ CrSS Total Reverse Capacitance(Note 2) ‐‐ 0.75 MAX. ‐‐ 1.1 ‐‐ 10 3 1 IR = 0.1pA BVR ≥ 30V Crss = 0.75pF ‐65°C to +200°C ‐55°C to +150°C 300mW 20mA 100µA 30V ±50V UNITS V V pA CONDITIONS IR = 1µA IF = 10mA VR = 1V VR = 10V pF VR = 10V, f = 1MHz Click To Buy Note 1 - Absolute maximum ratings are limiting values above which ID100 serviceability may be impaired. Note 2 - Design reference only, not 100% tested FIGURE 1 – Operational Amplifier Protection FIGURE 2 – Sample & Hold Circuit Input Differential Voltage limited to 0.8V (typ) by Diodes ID100 D1 and D2. Common Mode Input voltage limited by Diodes ID100 D3 and D4 to ±15V. Typical Sample and Hold circuit with clipping. ID100 diodes reduce offset voltages fed capacitively from the ID100 switch gate. TO-78 (Bottom View) Available Packages: Micross Components Europe ID100 in TO-78 ID100 available as bare die Tel: +44 1603 788967 Email: [email protected] Web: http://www.micross.com/distribution Please contact Micross for full package and die dimensions Note pins 3 & 5 must not be connected, in any fashion or manner, to any circuit or node Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: [email protected] Web: www.micross.com/distribution.aspx