Sharma MKT075103F251 Film capacitor Datasheet

Sharma Film Capacitors
FILM
CAPACITORS
Quick Reference Guide
Series
(Former Series)
Dielectric/
Construction
Lead Spacing
millimeters / (inches)
Capacitance Range
Voltage Range
MKT 050
(MKT1.85)
Metallized Polyester
Molded can
5.0 (0.200”)
0.001 µF to 1.0 µF
50 VDC to 400 VDC
MKT 075
(MKT1.67)
Metallized Polyester
Molded can
7.5 (0.300”)
0.033 µF to 0.33 µF
100 VDC to 630 VDC
MKT 100
(MKT1.60)
Metallized Polyester
Molded can
10.0 (0.400”), 15.0 (0.600”),
22.5 (0.886”), 27.5 (1.083”)
0.001 µF to 6.8 µF
100 VDC to 1000 VDC
MKT 00S
(SMX)
Metallized Polyester
Epoxy molded
Surface Mount
0.01 µF to 0.22 µF
50 VDC to 630 VDC
MKT D01
(MPD-1)
Metallized Polyester
Epoxy dipped
10.0 (0.400”), 15.0 (0.600”),
22.5 (0.886”), 27.5 (1.083”)
0.001 µF to 6.8 µF
100 VDC to 630VDC
MKT D02
(MPD-2)
Metallized Polyester
Epoxy dipped
10.0 (0.400”), 15.0 (0.600”),
17.5 (0.689”), 25.0 (0.984”)
27.5 (1.083”)
0.01 µF to 3.9 µF
100 VDC to 630VDC
MKT D03
(MPD-3)
Metallized Polyester
Epoxy dipped
10.0 (0.400”), 15.0 (0.600”),
17.5 (0.689”), 25.0 (0.984”)
27.5 (1.083”)
0.01 µF to 3.9 µF
100 VDC to 630VDC
MKTR
(MPR)
Metallized Polyester
Tape wrapped
Rounded Axial
0.01 µF to 6.8 µF
63 VDC to 630 VDC
MKTO
(MPO)
Metallized Polyester
Tape wrapped
Oval Axial
0.01 µF to 6.8 µF
63 VDC to 630 VDC
PLASTIC FILMS
USED IN CAPACITORS
Style
The capacitance value of a
capacitor depends on the area
of the dielectric separating the
two conductors, its thickness
and the dielectric constant.
Other properties of the film
such as the temperature
coefficient, the dissipation
factor, the voltage handling
capabilities, its suitability to be
metallized etc. also influence
the choice of the dielectric.
POLYESTER FILM
This film has a relatively high
dielectric constant which
makes it suitable for designs
of a capacitor with high
volumetric efficiency. It also
has high temperature stability,
high voltage and pulse
handling capabilities and can
be produced in very low
thickness. It can also be
metallized. Polyester is a
popular dielectric for plain film
capacitors
as
well
as
metallized film capacitors.
POLYPROPYLENE FILM
The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has
a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is
an ideal characteristic for many designs. Polypropylene has the capability to be metallized.
POLYSTYRENE FILM
The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling
capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near
linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized.
Cross Reference Guide
SHARMA
(former series)
Arcotronics
MKT 050
MKT1.85
MKT 075
MKT1.67
MKT 100
MKT1.60
MKT 00S
SMX
MKT D01
MPD-1
MKT D02
MPD-2
MKT D03
MPD-3
MKTR
MPR
MKTO
MPO
R.85
R.66
R.60
LDA
-
-
-
-
-
Evox
MMK 5
MMK
MMK
-
-
-
-
-
-
MEPCO*
712A 1
719A 1
719A 1
-
712A 1
712A 1
712A 1
-
-
Philips
370
371
372 & 373
-
367 to 369
366 to 369
367 to 369
-
-
MKT1817
MKT1818
MKT1822
MKT1824
-
-
-
MKT1813
-
Siemens
B32529
B32520/30
B32521/31
-
5140 to 44
5140 to 44
5140 to 44
-
-
Thompson
IRD/MC
IRD/MC
IRD/MC
-
MD
MD
MD
-
-
Wima
MKS 2
MKS 3
MKS 4
SMD 7.3
-
-
-
Roederstein
* MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE.
-
Sharma Film Capacitors
Ordering/Part Numbering
Example below indicates: MKT100 Series, 0.1µF, 5% Tol., 100 Volts, Bulk.
(EXAMPLE)
M
K
T
1
0
0
1
0
4
J
1
0
1
RH
Series
RoHS
Compliant
Enter Series Code: (Up to 6 Digits)
MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02,
MKTD03, MKTR, MKTO.
Capacitance
Enter EIA Capacitance Code: (3 Digits)
First Two Digits Represent Significant Figures of Capacitance in Picofarads.
Third Digit Indicates Number of Zeros
Example: 1000pF = 102
0.01uF = 103
Tolerance
Enter Capacitance Tolerance Code: (1 Digit)
Tolerance
SPCL ± 1% ± 2% ± 3%
Code
A
F
G
L
± 5%
J
± 6%
H
± 10% ± 20%
K
M
Rated Voltage
Enter Voltage Code: (3 Digits)
First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating.
Third Digit Indicates Number of Zeros
Example: 50V DC = 500
250V DC = 251
Product Packaging Code
Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style.
For other packaging styles, Enter packaging code listed below. (1 Digit)
Packaging
Code
T
A
( no code)
Packaging
Style
Tape / Reel
Ammo
Bulk
Part Marking
BOX TYPE
The Capacitance value is marked in µF together
with the Tolerance code and the DC Voltage
Figures on the top surface of the capacitors. The
MKT 100
capacitance is also marked in Nano Farads with "n"
representing the decimal point in the capacitance
value. The SAHA logo and series codes, MKT100,
MKP 100, KP300 etc., or their former series
designations, are marked on the side. MKT100 series is supplied in
certain cases, without series code marking. SAHA logo may be
replaced with
marking, "SH" or “S” depending upon the
limitations of space.
2.2J250
DIPPED TYPE
The Capacitance value is marked in µF along
with the Tolerance code and the DC Voltage
2.2K250
Figures on the side of the capacitors. The
capacitance is also marked in Capacitance
code with the first two digits representing the
significant digits followed by one digit
representing the number of zeros. The SAHA
logo may be replaced with
marking, "SH", “S”
or no brand marking depending on the limitation of space.
OTHER TYPES
All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the
capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also
indicated with a dot or ring.
Sharma Film Capacitors
PERFORMANCE CHARACTERISTICS
Figure 2.1A
ELECTRICAL - BASIC PARAMETERS
1.1 RATED CAPACITANCE
The nominal or rated value of capacitance is measured at 25 °C in an measuring bridge with 1K Hz
source, free of harmonics. Please refer to relevant series for the range of capacitance value covered.
Capacitance is frequency and temperature dependent. The variation pattern of capacitance with
temperature and frequency is explained in sections 2.1 and 2.2.
1.2 CAPACITANCE TOLERANCE
The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance
is expressed in percentage. The standard tolerances for plastic film capacitors are ±5% (J), ±10% (K)
and ±20% (M).
1.3 RATED VOLTAGE
The voltage at which the capacitor can operate continuously up to a temperature of 85 °C (unless
otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the
case sizes are listed in a matrix of capacitance value and rated voltage.
Polystyrene
Capacitance Change Vs. Temperature
Figure 2.1B
1.4 CATEGORY VOLTAGE
The maximum voltage that may be applied continuously over the temperature range is termed the
category voltage. This is same as the rated voltage up to 85 °C unless otherwise specified in the
climactic category of the product. Above 85 °C a derating has to be applied depending upon the
dielectric.
1.5 OPERATING TEMPERATURE
This is the temperature range with in which the capacitor can function as specified in the climactic
category. Please refer to relevant sections for derating above the temperature at which the full rated
voltage can be applied.
1.6 DISSIPATION FACTOR
This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage.
Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet
of the relevant series at 25 °C. Dissipation factor is temperature and frequency dependent. The
nature of variation of dissipation factor with temperature and frequency for different dielectric are
explained in Figures 2.3A to 2.3C and 2.4A to 2.4C.
Polyester
Capacitance Change Vs. Temperature
Figure 2.1C
1.7 INSULATION RESISTANCE
Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance
is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds
as the product of M Ohm and µF.
1.8 PULSE RISE TIME
The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage
or pulse. This is expressed in terms of Volts per µseconds. The dv/ dt rating of a capacitor depends
upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of
different types of capacitors are listed in the corresponding data sheets of the capacitors.
Polypropylene
Capacitance Change Vs. Temperature
Figure 2.2A
ELECTRICAL - EFFECTS AND RELATIONS
2.1 TEMPERATURE DEPENDENCE OF CAPACITANCE
Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is
different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The
The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of
change of capacitance with temperature is termed the Temperature Coefficient. The nominal values
of temperature coefficient for different dielectrics are shown below.
DIELECTRICS
POLYSTYRENE
POLYESTER
POLYPROPYLENE
TEMPERATURE
COEFFICIENT
-150 ppm
+400 ppm
-200 ppm
2.2 FREQUENCY DEPENDENCE OF CAPACITANCE
Capacitance reduces with increase in frequency. The
variation pattern for different dielectrics are shown in
figure 2.2A, 2.2B and 2.2C.
2.3 TEMPERATURE DEPENDENCE OF
DISSIPATION FACTOR
The dissipation factor varies with temperature. Each
dielectric follows a unique variation pattern. The variation
pattern for different dielectrics are shown in figure 2.3A,
2.3B and 2.3C.
Polystyrene
Capacitance Change Vs. Frequency
Figure 2.2C
Polypropylene
Capacitance Change Vs. Frequency
Figure 2.2B
Polyester
Capacitance Change Vs. Frequency
Sharma Film Capacitors
Figure 2.3A
Figure 2.4A
2.4 FREQUENCY DEPENDENCE OF
DISSIPATION FACTOR
Dissipation factor increased with frequency. The variation
pattern is different for different dielectrics. The typical
variation pattern for different dielectrics are shown in fig.
2.4A, 2.4B and 2.4C.
Polystyrene
Dissipation Factor Vs. Temperature
Figure 2.3B
Polystyrene
Dissipation Factor Vs. Frequency
2.5 TEMPERATURE DEPENDENCE OF INSULATION
RESISTANCE
The insulation resistance of the dielectric varies with
temperature. The variation pattern is different fro different
dielectric films. The typical variation pattern for different
dielectrics are shown in figure 2.5A, 2.5B and 2.5C.
Figure 2.4B
ELECTRICAL - AC APPLICATIONS
When a capacitor is connected to alternating voltage its
electrodes are alternately charged positive and negative.
The charge alternates with a rhythm of double the
frequency of the alternating voltage. Thus there is
alternating current flowing in the leads of the capacitor.
Polyester
Dissipation Factor Vs. Temperature
Figure 2.3C
Polyester
Dissipation Factor Vs. Frequency
Figure 2.4C
3.1 ACROSS THE LINE APPLICATIONS
In this application the capacitor is connected between the
lines, ie, between the main phase and neutral line
terminals. In this type of application, failure of capacitor
due to short circuit will not result in an electric shock. The
capacitors rated for normal across the line applications
are termed class-X2 capacitors.
3.2 BETWEEN LINE AND GROUND APPLICATIONS
In this type of application the capacitors are connected
between the line and the ground, ie, between the phase
terminal and the body. In this application, failure of the
capacitor due to short circuit could possibly expose
somebody touching the appliance to an electric shock.
The capacitors rated for this application are termed classY capacitors.
Polypropylene
Dissipation Factor Vs. Temperature
Polypropylene
Dissipation Factor Vs. Frequency
MECHANICAL CHARACTERISTICS
Figure 2.5A
Polystyrene
Insulation Resistance Vs. Temperature
Figure 2.5B
Polyester
Insulation Resistance Vs. Temperature
4.1 RESISTANCE TO SOLVENTS
The encapsulation technics adopted in the manufacture of
plastic film capacitors ensure resistance to a wide range
of solvents and cleaning liquids. The epoxy end sealed
boxed capacitors can stand Trichloro trifluorethane,
Methanol, Ethanol, Isopropanol and Aqueous cleaning
solvents.
4.2 SOLDERABILITY
A minimum of 3/4 of the circumferential surface of the
terminations will be covered with new solder when dipped
in molten solder bath at 230 °C for 2 ±1 sec. after
immersing
in methanol - rosin solution at room
temperature for 5 to 10 seconds.
Figure 2.5C
4.3 TERMINAL STRENGTH
The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of
2.25 Kgs(5 lbs).
ENVIRONMENTAL
RESISTANCE TO HUMIDITY
Polypropylene
Insulation Resistance Vs. Temperature
The capacitor samples will be exposed to 93 ±2 °C for 56 days at 40 ±2 °C. After the test the
capacitance change shall be within 3% of the original value, The insulation resistance shall be within
50% of the initial limits and the dissipation factor shall remain within the initial specifications.
Sharma Film Capacitors
MKT 050
SERIES
Formerly MKT 1.85 series
INTRODUCTION
The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm
lead spacing. This series covers a wide range of values and voltages and exhibit excellent
high frequency characteristics. In addition to specific applications such as Blocking, Bypassing and Coupling, this series is widely used in all General Purpose applications.
FEATURES
value and Voltage range
• Wide
miniature size
• Ultra
retardant case and potting
• Flame
dimensions and surface finish due to molded case construction
• Consistent
in tape & reel form for automatic insertion
• Available
• Self healing capability
DIMENSIONS
AND
TOLERANCES:
"d"= 0.5 to 0.6mm
(0.020 to 0.024")
for dimension
“T”≤ 3.5mm
(0.138”)
"d"= 0.6 mm (0.024")
for dimension “T” >3.5mm (0.138”)
"LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply
PULSE RISE TIME (dv/dt) Volts per µsec.
GENERAL SPECIFICATIONS:
Dissipation factor: For capacitance ≤ 0.1 µF = 0.010 max at 1 KHz, 0.015 max at 10 KHz,
0.030 max at 100 KHz. For capacitance > 0.1 µF = 0.0010 max at 1 KHz, 0.0015 max at
10 KHz. Insulation resistance: For nominal voltage < 100 V DC; ≥10,000 M Ohms
for C ≤ 0.10 µF, ≥1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ≥ 30,000
M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C.
Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test: 1.6 times the rated
voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C
Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D
RATED
Capacitance
dv/dt
VOLTAGE
RangeµF
value
50
63
0.001-1.0
0.001-1.0
4
8
100
>0.0068
10
100
0.0033-0.0068
15
100
>0.0033
30
250
400
0.001-1.0
0.001-1.0
20
40
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1. Capacitance change shall remain within ±5%.
2. Dissipation Factor shall be within 1.5 times the original limits.
3. Insulation Resistance shall be above 50% of the initial limits.
4. There shall be no remarkable change in the appearance and the marking shall remain legible.
Taping Dimensions for MKT 050 Series (5mm Pitch)
DESCRIPTION
d Lead wire dia.
P Tapingpitch
P0 Sprocketholepitch
P1 Centering of lead wire
P2 Centering of the body
p Lead spacing
dS Component alignment
H Height from Sproket
Center to component body
W
Tape width
W 0 Width of adhesive tape
W 1 Sprocket hole alignment
D0 Positionholediameter
t Tape thickness
DIMENSION
TOLERANCES
mm
Inches
mm
Inches
0.5 to 0.6 0.020 to 0.024
±0.05
±0.002
12.7
0.500
±1
±0.039
12.7
0.500
±0.2
±0.008
3.85
0.152
±0.7
±0.028
6.35
0.250
±1.3
±0.051
5
0.197
+0.6/ -1.1 +0.024/ -0.043
0
0.000
±2
±0.079
16.0, 16.5 0.630, 0.650
±0.5
±0.020
or 18.5
or 0.728
18
0.709
+1.0/ -0.5 +0.039/ -0.020
6 min.
0.236 min.
9
0.354
±0.5
±0.020
4
0.157
±0.2
±0.008
0.7
0.028
±0.2
±0.008
Packaging Specifications
Bulk, Tape/Reel & Ammo Pack
BOX SIZE
T x H x L
2.5 x 6.5 x 7.2
3.0 x 6.5 x 7.2
3.5 x 7.5 x 7.2
4.5 x 9.5 x 7.2
5.0 x 10.0 x 7.2
6.0 x 11.0 x 7.2
7.2 x 13.0 x 7.2
BULK
CARTON
3000
3000
2000
1500
1000
2000
1500
TAPED
REEL PACK
AMMO
PACK
2500
3500
2100
2900
1800
2500
1400
1900
1200
NA
1000
NA
800
NA
Sharma Film Capacitors
MKT 050
SERIES CASE DIMENSIONS
Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V
Voltage
50 V DC / 30 V AC
63 V DC / 40 V AC
100 V DC / 63 V AC
250 V DC / 160 V AC
Cap Value
Dimensions in MM
Dimensions in MM
Dimensions in MM
DIMENSIONS IN MM
in µF
0.001
L
H
T
S
L
H
T
S
L
H
T
S
400 V DC / 200 V AC
DIMENSIONS IN MM
L
7.2
H
6.5
T
2.5
S
5.0
L
7.2
H
6.5
T
2.5
S
5.0
0.0015
7.2
6.5
2.5
0.0022
0.0033
7.2
7.2
6.5
6.5
2.5
2.5
5.0
7.2
6.5
2.5
5.0
5.0
5.0
7.2
7.2
6.5
6.5
2.5
2.5
5.0
5.0
0.0047
7.2
6.5
2.5
5.0
7.2
6.5
2.5
5.0
0.0068
7.2
6.5
2.5
5.0
7.2
6.5
2.5
5.0
7.2
6.5
3.0
5.0
0.01
0.015
7.2
7.2
6.5
6.5
2.5
2.5
5.0
5.0
7.2
7.2
6.5
6.5
2.5
2.5
5.0
5.0
7.2
7.2
7.5
9.5
3.5
4.5
5.0
5.0
0.022
0.033
7.2
7.2
6.5
6.5
2.5
2.5
5.0
5.0
7.2
7.2
6.5
7.5
3.0
3.5
5.0
5.0
7.2
7.2
9.5
10.0
4.5
5.0
5.0
5.0
7.2
11.0
6.0
5.0
0.047
7.2
6.5
2.5
5.0
7.2
6.5
3.0
5.0
7.2
9.5
4.5
5.0
0.068
7.2
6.5
2.5
5.0
7.2
7.5
3.5
5.0
7.2
9.5
4.5
5.0
0.1
0.15
7.2
7.2
6.5
6.5
2.5
3.0
5.0
5.0
7.2
7.2
6.5
7.5
2.5
3.5
5.0
5.0
7.2
7.2
9.5
10.0
4.5
5.0
5.0
5.0
7.2
7.2
11.0
13.0
6.0
7.2
5.0
5.0
0.22
0.33
0.47
7.2
7.2
7.2
7.5
7.5
9.5
3.5
3.5
4.5
5.0
5.0
5.0
7.2
7.2
7.2
7.5
9.5
10.0
3.5
4.5
5.0
5.0
5.0
5.0
7.2
11.0
6.0
5.0
7.2
13.0
7.2
5.0
0.68
1.0
7.2
7.2
10.0
11.0
5.0
6.0
5.0
5.0
7.2
11.0
6.0
5.0
Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V
Voltage
50 V DC / 30 V AC
63 V DC / 40 V AC
100 V DC / 63 V AC
250 V DC / 160 V AC
400 V DC / 200 V AC
Cap Value
in µF
DimensionsinInches
L
H
T
S
DimensionsinInches
L
H
T
S
DimensionsinInches
L
H
T
S
DimensionsinInches
L
H
T
S
DimensionsinInches
L
H
T
S
0.001
0.0015
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.0022
0.0033
0.0047
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197
0.0068
0.01
0.015
0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197
0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197
0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.256
0.256
0.295
0.295
0.374
0.394
0.433
0.098
0.118
0.138
0.138
0.177
0.197
0.236
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.256
0.256
0.256
0.295
0.295
0.374
0.394
0.433
0.098
0.098
0.098
0.138
0.138
0.177
0.197
0.236
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.256
0.256
0.256
0.295
0.374
0.394
0.433
0.098
0.098
0.118
0.138
0.177
0.197
0.236
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.283
0.283
0.283
0.283
0.283
0.283
0.283
0.256
0.295
0.374
0.374
0.433
0.512
0.512
0.118
0.138
0.177
0.177
0.236
0.283
0.283
0.197 0.283 0.374 0.177 0.197
0.197 0.283 0.394 0.197 0.197
0.197 0.283 0.433 0.236 0.197
0.197
0.197
0.197
0.197
Sharma Film Capacitors
MKT 100 SERIES
Formerly MKT 1.60 series
INTRODUCTION:
The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of
values and voltages. These capacitors also have good high frequency characteristics.
In addition to some specific applications such as Blocking, By-passing and Coupling,
this series is widely used in all General Purpose applications.
FEATURES:
Wide value and Voltage range
Flame retardant case and potting
Consistent dimensions and surface finish due to molded case construction
Self healing capability
•
•
•
•
DIMENSIONS
AND
TOLERANCES:
"d" - 0.8 mm (0.032"))
"LL'' - 6.0 ± 1.0mm (0.24 ±
0.04")
Tolerance on "s" ± 0.4mm
(0.016")
PULSE RISE TIME (dv/dt) Volts per µsec.
GENERAL SPECIFICATIONS:
Dissipation factor: ≤ 0.0150 at 10K Hz for capacitance ≤ 1.0 µF ≤ 0.0100 at 1 K
Hz for capacitance> 1.0 µF Insulation resistance: For nominal voltage > 100 V
DC, ≥30,000 M Ohms for C≤ 0.33 µF, ≥10,000 seconds for C> 0.33 µF, For
nominal voltage ≤ 100 V DC, ≥10,000 M Ohms for C≤ 0.10 µF, ≥1,000 seconds for
C> 0.10 µF at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J),
±10%(K) and ±20%(M). Voltage Test: 1.6 times the rated voltage applied between
terminals for 2 seconds at a temperature of 25 ± 5 °C. Temperature range: -55 to
100 °C with derating above 85 °C. Climatic category: F M D
RATED
LEAD SPACING mm (inches)
VOLTAGE
10.0
(0.40)
15.0
(0.60)
22.5
(0.89)
27.5
(1.08)
100
160
6
8
3
5
2
3
1
2
250
11
7
4
3
400
20
10
5.5
5
630
30
15
8
7
1000
60
25
15
10
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1.
2.
3.
4.
Capacitance change shall remain within ±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Millimeters 100V • 160V• 250V• 400V• 630V• 1000V
Voltage
Cap Value
in µF
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
100 V DC / 63 V AC
160 V DC / 90 V AC
250 V DC / 160 V AC
400 V DC / 200 V AC
630 V DC / 220 V AC
1000 V DC / 250 V AC
DimensionsinMillimeters
L
H
T
S
DimensionsinMillimeters
L
H
T
S
DimensionsinMillimeters
L
H
T
S
DimensionsinMillimeters
L
H
T
S
DimensionsinMillimeters
L
H
T
S
DimensionsinMillimeters
L
H
T
S
13.0
9.0
4.0
10.0
13.0
9.0
4.0
10.0
13.0
9.0
4.0
10.0
13.0
9.0
4.0
10.0
13.0 11.0
5.0
10.0
13.0 12.0
6.0
10.0
18.0 11.0
5.0
15.0
18.0 11.0
5.0
15.0
18.0 13.5
7.5
15.0
26.5 15.0
6.0
22.5
26.5 15.0
6.0
22.5
26.5 16.0
7.0
22.5
26.5 18.5 10.0 22.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
32.0
32.0
9.0
11.0
11.0
11.0
12.0
13.5
16.0
17.0
18.5
20.0
22.0
4.0
5.0
5.0
5.0
6.0
7.5
7.0
8.5
10.0
11.0
13.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
13.0
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
32.0
32.0
9.0
11.0
11.0
11.0
12.0
13.5
14.5
17.0
18.5
20.0
22.0
4.0
5.0
5.0
5.0
6.0
7.5
8.5
8.5
10.0
11.0
13.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
27.5
27.5
13.0
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
32.0
32.0
32.0
9.0
9.0
9.0
11.0
11.0
11.0
12.0
15.0
16.0
17.0
17.0
20.0
22.0
4.0
4.0
4.0
5.0
5.0
5.0
6.0
6.0
7.0
8.5
9.0
11.0
13.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
27.5
13.0
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
32.0
32.0
9.0
9.0
11.0
11.0
11.0
12.0
13.5
15.0
16.0
17.0
17.0
20.0
4.0
4.0
5.0
5.0
5.0
6.0
7.5
6.0
7.0
8.5
9.0
11.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
26.5
26.5
26.5
32.0
32.0
9.0
9.0
9.0
11.0
12.0
11.0
12.0
13.5
15.0
16.0
17.0
20.0
22.0
4.0
4.0
4.0
5.0
6.0
5.0
6.0
7.5
6.0
7.0
8.5
11.0
13.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
Sharma Film Capacitors
MKT 100 SERIES CASE DIMENSIONS CONTINUED
Case Dimensions in Inches 100V • 160V• 250V• 400V• 630V• 1000V
Voltage
Cap Value
in µF
0.001
100 V DC / 63 V AC
160 V DC / 90 V AC
250 V DC / 160 V AC
400 V DC / 200 V AC
630 V DC / 220 V AC
DimensionsinInches
DimensionsinInches
DimensionsinInches
DimensionsinInches
DimensionsinInches
L
H
T
S
L
H
T
S
L
H
T
S
L
H
T
S
L
H
T
S
1000 V DC / 250 V AC
DimensionsinInches
L
H
T
S
0.512 0.354 0.157 0.394
0.0015
0.0022
0.512 0.354 0.157 0.394
0.512 0.354 0.157 0.394
0.0033
0.0047
0.512 0.354 0.157 0.394
0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394
0.0068
0.001
0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394
0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591
0.015
0.022
0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591
0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.709 0.531 0.295 0.591
0.033
0.047
0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886
0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886
0.068
0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886
0.1
0.15
0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.728 0.394 0.886
0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083
0.22
0.33
0.512 0.433 0.197 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083
0.709 0.433 0.197 0.591 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083
0.47
0.68
0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083
0.709 0.472 0.236 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.669 0.354 1.083
1.0
1.5
2.2
3.3
4.7
6.8
0.709
1.043
1.043
1.043
1.260
1.260
0.531
0.630
0.669
0.728
0.787
0.866
0.295
0.276
0.335
0.394
0.433
0.512
0.591
0.886
0.886
0.886
1.083
1.083
0.709
1.043
1.043
1.260
1.260
0.571
0.669
0.728
0.787
0.866
0.335
0.335
0.394
0.433
0.512
0.591
0.886
0.886
1.083
1.083
1.043
1.260
1.260
1.260
0.669
0.669
0.787
0.866
0.335
0.354
0.433
0.512
0.886 1.260 0.787 0.433 1.083
1.083
1.083
1.083
MKT 075
SERIES
Formerly MKT 1.67 series
INTRODUCTION:
The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use
in thickly populated Printed Circuit Boards where miniaturization is important. These
capacitors are widely used in all General Purpose applications.
FEATURES:
Wide value and Voltage range
Flame retardant case and potting
Consistent dimensions and surface finish due to molded case construction
Self healing capability
•
•
•
•
GENERAL SPECIFICATIONS:
Dissipation factor: ≤ 0.015 at 10 K Hz for capacitance< 1.0 µF
Insulation resistance: For nominal voltage ≤ 100 V DC, ≥10,000 M Ohm for C≤
0.1µF, ≥1,000 seconds for C> 0.1µF, For nominal voltage > 100 V DC, ≥30,000 M
Ohm for C≤ 0.33µF, ≥10,000 seconds for C> 0.33µF. Capacitance tolerance:
±5%(J), ±10%(K)and ±10%(M)
Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at
temperature of 25 ± 5 °C
Temperature range: -55 to 100 °C with derating above 85 °C
Climatic category: F M D
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at
85 °C for 1000 hours. After the test:
1.
2.
3.
4.
Capacitance change shall remain within ±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking shall
remain legible.
DIMENSIONS AND
TOLERANCES:
"d" - 0.6 mm (0.024")
for dimension “T” =
4mm (0.160”)
"d" - 0.8 mm (0.032")
for dimension "T" >
4mm (0.160")
"LL'' - 6.0 ± 1.0mm
(0.24 ± 0.04")
Tolerance on "s" ± 0.4mm (0.016")
PULSE RISE TIME (dv/dt)
RATED
VOLTAGE
Volts per µsec.
dv/dt per µ
VoltsSeconds
100
6
250
15
400
30
630
40
Sharma Film Capacitors
MKT 075
SERIES CASE DIMENSIONS
Case Dimensions in Millimeters100V • 250V
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
Dimensions in Millimeters
L
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
10.5
10.5
10.5
10.5
10.5
10.5
10.5
µF
4.0
4.0
4.0
4.0
4.0
5.0
6.0
S
7.5
7.5
7.5
7.5
7.5
7.5
7.5
Dimensions in Millimeters
L
H
T
S
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
9.0
9.0
9.0
9.0
9.0
11.0
11.0
12.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
DC/AC
630 V DC / 250 V AC
Dimensions in Millimeters
L
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.01
0.015
0.022
0.033
9.0
9.0
9.0
9.0
9.0
11.0
12.0
T
VOLTAGE
400 V DC / 200 V AC
Capacitance
in
H
10.5
10.5
10.5
10.5
10.5
10.5
H
9.0
9.0
9.0
9.0
11.0
12.0
T
4.0
4.0
4.0
4.0
5.0
6.0
S
7.5
7.5
7.5
7.5
7.5
7.5
Case Dimensions in Inches 100V • 250V
DC/AC
250 V DC / 160 V AC
Dimensions in Millimeters
L
H
T
S
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
9.0
9.0
9.0
9.0
9.0
9.0
11.0
12.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
6.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
Dimensions in Inches
L
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
H
0.413
0.413
0.413
0.413
0.413
0.413
0.413
µF
S
0.157
0.157
0.157
0.157
0.157
0.197
0.236
0.295
0.295
0.295
0.295
0.295
0.295
0.295
L
H
T
S
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.354
0.354
0.354
0.354
0.354
0.433
0.433
0.472
0.157
0.157
0.157
0.157
0.157
0.197
0.197
0.236
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
DC/AC
630 V DC / 250 V AC
Dimensions in Inches
L
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.01
0.015
0.022
0.033
0.354
0.354
0.354
0.354
0.354
0.433
0.472
Dimensions in Inches
T
VOLTAGE
400 V DC / 200 V AC
Capacitance
in
DC/AC
250 V DC / 160 V AC
H
0.413
0.413
0.413
0.413
0.413
0.413
0.354
0.354
0.354
0.354
0.433
0.472
Dimensions in Inches
T
S
0.157
0.157
0.157
0.157
0.197
0.236
0.295
0.295
0.295
0.295
0.295
0.295
L
H
T
S
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.354
0.354
0.354
0.354
0.354
0.354
0.433
0.472
0.157
0.157
0.157
0.157
0.157
0.157
0.197
0.236
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
MKTD01
SERIES
Formerly MPD 1 series
INTRODUCTION:
The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of
values and voltages. They are suitable for applications such as Blocking, By-passing
and Coupling and are widely used in General communication equipment.
FEATURES:
value and Voltage range
• Wide
healing capability
• Self
retardant powder epoxy encapsulation
• Flame
• Minimum overall dimensions due to dip coated construction
GENERAL SPECIFICATIONS:
Dissipation factor: < 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz
for capacitance> 1.0 µF.
Insulation resistance: For 100 VDC rated parts;
≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF, at a temperature
of 25 ± 5 °C, For 250 to 630 VDC; rated parts ≥ 15,000 M Ohms for C≤ 0.33 µF,
≥ 5,000 seconds for C> 0.33 µF, at a temperature of 25 ± 5 °C.
Capacitance tolerance: ±5%(J),±10%(K) and ±20%(M) (Special parts with close
tolerance of ±1% and ±2% available on request) Voltage Test : 1.6 times the rated
voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C
Temperature range: -55 to 85 .°C Climatic category: F M F
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied
at 85 °C for 1000 hours. After the test:
1. Capacitance change shall remain within ±5%.
2. Dissipation Factor shall be within 1.5 times the original limits.
3. Insulation Resistance shall be above 50% of the initial limits.
4. There shall be no remarkable change in the appearance and the marking
shall remain legible.
DIMENSIONS AND
TOLERANCES:
d - 0.6 mm (0.024")
for
Lead Spacing "s" =
10.0 mm (0.40")
d - 0.8 mm (0.032")
for
Lead Spacing "s" >
10.0 mm (0.40")
z - 1.5mm ( 0.06" )
max.
LL'' - 20.0 mm min.(0.78")
Tolerance on "s" ± 1.0mm (0.04")
PULSE RISE TIME (dv/dt) Volts per µsec.
LEAD
SPACING
mm
(inches)
Rated
10.0
15.0
22.5
27.0
Voltage
(0.40)
(0.60)
(0.89)
(1.06)
100
6
3
2
1
250
11
7
4
3
400
20
10
5.5
5
630
30
15
8
7
Sharma Film Capacitors
MKTD01 SERIES CASE DIMENSIONS
Case Dimensions in Millimeters 100V • 250V • 400V • 630V
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
Dimensions in Millimeters
L
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
12.5
12.5
12.5
18.0
18.0
18.0
18.0
26.0
26.0
26.0
31.0
31.0
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
9.5
10.0
10.0
10.5
11.5
12.0
14.0
14.0
16.0
19.0
23.0
25.0
T
5.0
5.0
5.5
5.5
6.0
6.5
7.5
7.5
9.0
11.0
12.0
14.0
S
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.0
27.0
VOLTAGE
400 V DC / 200 V AC
Capacitance
in
H
Case Dimensions in Inches 100V • 250V • 400V • 630V
DC/AC
250 V DC / 160 V AC
Dimensions in Millimeters
L
H
T
S
12.5
12.5
12.5
12.5
12.5
12.5
12.5
18.0
18.0
18.0
26.0
26.0
26.0
31.0
31.0
31.0
31.0
8.5
9.0
9.0
9.0
9.5
9.5
10.0
10.5
11.5
12.5
12.5
14.5
16.0
17.0
19.0
23.0
27.0
4.5
4.5
4.5
4.5
5.0
5.0
5.5
5.5
6.5
7.0
7.0
8.0
9.0
9.5
11.5
14.0
16.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
22.5
22.5
22.5
27.0
27.0
27.0
27.0
DC/AC
630 V DC / 220 V AC
Dimensions in Millimeters
Dimensions in Millimeters
L
H
T
S
L
H
T
S
12.5
12.5
12.5
12.5
12.5
18.0
18.0
26.0
26.0
26.0
26.0
31.0
31.0
31.0
31.0
9.0
9.5
9.5
10.5
10.5
10.5
11.5
12.5
13.5
15.5
18.0
17.5
20.0
23.5
26.0
4.5
4.5
5.0
5.5
6.0
6.0
6.5
6.0
7.0
8.5
9.5
10.0
12.0
13.5
16.5
10.0
10.0
10.0
10.0
10.0
15.0
15.0
22.5
22.5
22.5
22.5
27.0
27.0
27.0
27.0
12.5
12.5
12.5
18.0
18.0
18.0
26.0
26.0
26.0
31.0
31.0
31.0
31.0
9.0
9.5
10.5
11.0
11.5
12.5
13.0
14.0
16.5
17.5
19.5
22.5
27.5
4.5
5.0
6.0
6.0
6.5
7.0
7.0
8.5
10.0
10.5
12.0
15.0
19.0
10.0
10.0
10.0
15.0
15.0
15.0
22.5
22.5
22.5
27.0
27.0
27.0
27.0
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
Dimensions in Inches
L
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
0.374
0.394
0.394
0.413
0.453
0.472
0.551
0.551
0.630
0.748
0.906
0.984
T
Dimensions in Inches
S
0.197
0.197
0.217
0.217
0.236
0.256
0.295
0.295
0.354
0.433
0.472
0.551
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.886
0.886
0.886
1.063
1.063
VOLTAGE
400 V DC / 200 V AC
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
H
0.492
0.492
0.492
0.709
0.709
0.709
0.709
1.024
1.024
1.024
1.220
1.220
Capacitance
in
DC/AC
250 V DC / 160 V AC
L
H
T
S
0.492
0.492
0.492
0.492
0.492
0.492
0.492
0.709
0.709
0.709
1.024
1.024
1.024
1.220
1.220
1.220
1.220
0.335
0.354
0.354
0.354
0.374
0.374
0.394
0.413
0.453
0.492
0.492
0.571
0.630
0.669
0.748
0.906
1.063
0.177
0.177
0.177
0.177
0.197
0.197
0.217
0.217
0.256
0.276
0.276
0.315
0.354
0.374
0.453
0.551
0.650
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.886
0.886
0.886
1.063
1.063
1.063
1.063
DC/AC
630 V DC / 220 V AC
Dimensions in Inches
Dimensions in Inches
L
H
T
S
L
H
T
S
0.492
0.492
0.492
0.492
0.492
0.709
0.709
1.024
1.024
1.024
1.024
1.220
1.220
1.220
1.220
0.354
0.374
0.374
0.413
0.413
0.413
0.453
0.492
0.531
0.610
0.709
0.689
0.787
0.925
1.024
0.177
0.177
0.197
0.217
0.236
0.236
0.256
0.236
0.276
0.335
0.374
0.394
0.472
0.531
0.650
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.886
0.886
0.886
0.886
1.063
1.063
1.063
1.063
0.492
0.492
0.492
0.709
0.709
0.709
1.024
1.024
1.024
1.220
1.220
1.220
1.220
0.354
0.374
0.413
0.433
0.453
0.492
0.512
0.551
0.650
0.689
0.768
0.886
1.083
0.177
0.197
0.236
0.236
0.256
0.276
0.276
0.335
0.394
0.413
0.472
0.591
0.748
0.394
0.394
0.394
0.591
0.591
0.591
0.886
0.886
0.886
1.063
1.063
1.063
1.063
MKT D02
SERIES
Formerly MPD 2 series
INTRODUCTION:
The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values
and voltages. This series has lead spacing starting from 7.5mm. and covers more values
than the conventional series. They are suitable for applications such as Blocking, Bypassing and Coupling and are widely used in General communication equipment.
FEATURES:
Wide value and Voltage range
Self healing capability
Flame retardant powder epoxy encapsulation
Minimum overall dimensions due to dip coated construction
•
•
•
•
GENERAL SPECIFICATIONS:
DIMENSIONS AND
TOLERANCES:
d - 0.6 mm (0.024")
for
Lead Spacing "s" =
10.0 mm (0.40")
d - 0.8 mm (0.032")
for
Lead Spacing "s" >
10.0 mm (0.40")
z - 1.5mm ( 0.06" )
max.
LL'' - 20.0 mm min.(0.78")
Tolerance on "s" ± 1.0mm (0.04")
Dissipation factor: < 0.0100 at 1 K Hz for capacitanc ≤e 1.0 µF, < 0.0150 at 1 K Hz
PULSE RISE TIME (dv/dt) Volts per µsec.
for capacitance> 1.0 µF.Insulation resistance: For 100 VDC rated parts;
LEAD SPACING mm (inches)
≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF at a temperature of
Rated
7.5
10.0
15.0
22.5
25 ± 5 °C. For 250 to 630 VDC rated parts ≥
; 15,000 M Ohms for C≤ 0.33 µF,
Voltage
(0.30)
(0.40)
(0.60)
(0.89)
≥ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C.
100
6
6
3
2
Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test : 1.6 times the
250
15
11
7
4
rated voltage applied between terminals for 2 seconds. at a temperature of 25
± 5 °C.
400
30
20
10
5.5
Temperature range: -55 to 85 ° C Climatic category: F M F
630
40
30
15
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1.
2.
3.
4.
Capacitance change shall remain within
±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking shall remain legible.
8
27.5
(1.08)
1
3
5
7
Sharma Film Capacitors
MKT D02 SERIES CASE DIMENSIONS
Case Dimensions in Millimeters 100V • 250V • 400V • 630V
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
8.5
9.0
9.0
9.5
9.5
10.0
10.5
11.0
10.5
11.0
11.5
12.0
13.0
14.0
14.0
15.0
16.0
17.5
18.5
T
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.0
5.5
4.5
5.0
5.5
6.0
6.5
7.0
5.5
6.0
6.5
7.0
7.5
8.5
8.5
9.0
10.0
10.5
11.0
S
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
17.5
17.5
17.5
17.5
17.5
VOLTAGE
400 V DC / 200 V AC
µF
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
H
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
21.0
21.0
21.0
21.0
21.0
CAPACITANCE
in
DC/AC
250 V DC / 160 V AC
Dimensions in Millimeters
L
Case Dimensions in Inches 100V • 250V • 400V • 630V
Dimensions in Millimeters
L
H
T
S
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
21.0
21.0
21.0
21.0
21.0
29.0
29.0
29.0
29.0
29.0
29.0
29.0
29.0
7.5
8.0
8.0
8.0
8.0
8.5
9.0
9.0
9.5
10.0
9.5
10.5
11.0
11.5
12.0
12.5
11.5
12.0
12.5
13.5
14.5
14.0
15.0
15.5
18.5
19.5
20.5
21.5
22.5
5.0
4.5
4.5
4.5
4.5
5.0
5.5
5.5
5.5
6.0
5.5
5.5
6.0
6.5
7.0
7.5
6.5
7.0
8.0
8.0
8.0
7.5
8.0
9.0
9.0
9.5
10.5
12.0
13.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
17.5
17.5
17.5
17.5
17.5
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
DC/AC
630 V DC / 220 V AC
Dimensions in Millimeters
Dimensions in Millimeters
L
H
T
S
L
H
T
S
10.5
10.5
10.5
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
29.0
29.0
29.0
29.0
29.0
29.0
29.0
7.5
8.0
8.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
11.0
11.5
12.0
13.0
14.5
15.0
16.0
15.0
16.0
16.5
19.5
20.5
21.5
23.0
5.0
4.5
4.5
4.5
4.5
5.0
5.5
6.0
6.5
7.0
7.5
6.0
6.5
7.0
8.0
8.0
8.5
9.5
8.5
9.5
10.0
10.0
11.0
12.0
13.0
7.5
7.5
7.5
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
17.5
17.5
17.5
17.5
17.5
17.5
17.5
25.0
25.0
25.0
25.0
25.0
25.0
25.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
29.0
29.0
29.0
29.0
31.0
31.0
31.0
8.5
8.5
9.0
9.5
10.5
10.5
11.0
10.5
11.0
11.5
12.0
12.5
14.5
15.5
14.0
15.5
16.0
18.5
19.0
20.0
21.0
5.0
4.5
5.0
5.5
5.5
6.5
7.0
6.0
6.0
6.5
7.0
8.0
8.5
9.0
8.5
9.0
9.0
9.0
9.5
10.5
11.5
15.0
15.0
15.0
15.0
15.0
15.0
15.0
17.5
17.5
17.5
17.5
17.5
17.5
17.5
25.0
25.0
25.0
25.0
27.5
27.5
27.5
VOLTAGE
100 V DC / 63 V AC
CAPACITANCE
in
µF
L
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.335
0.354
0.354
0.374
0.374
0.394
0.413
0.433
0.413
0.433
0.453
0.472
0.512
0.551
0.551
0.591
0.630
0.689
0.728
T
0.177
0.177
0.177
0.177
0.177
0.177
0.177
0.177
0.177
0.197
0.217
0.177
0.197
0.217
0.236
0.256
0.276
0.217
0.236
0.256
0.276
0.295
0.335
0.335
0.354
0.394
0.413
0.433
Dimensions in Inches
S
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.591
0.591
0.689
0.689
0.689
0.689
0.689
VOLTAGE
400 V DC / 200 V AC
µF
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
H
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.709
0.709
0.709
0.709
0.709
0.827
0.827
0.827
0.827
0.827
CAPACITANCE
in
DC/AC
250 V DC / 160 V AC
Dimensions in Inches
L
H
T
S
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.413
0.512
0.512
0.709
0.709
0.709
0.709
0.709
0.709
0.827
0.827
0.827
0.827
0.827
1.142
1.142
1.142
1.142
1.142
1.142
1.142
1.142
0.295
0.315
0.315
0.315
0.315
0.335
0.354
0.354
0.374
0.394
0.374
0.413
0.433
0.453
0.472
0.492
0.453
0.472
0.492
0.531
0.571
0.551
0.591
0.610
0.728
0.768
0.807
0.846
0.886
0.197
0.177
0.177
0.177
0.177
0.197
0.217
0.217
0.217
0.236
0.217
0.217
0.236
0.256
0.276
0.295
0.256
0.276
0.315
0.315
0.315
0.295
0.315
0.354
0.354
0.374
0.413
0.472
0.512
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.295
0.394
0.394
0.591
0.591
0.591
0.591
0.591
0.591
0.689
0.689
0.689
0.689
0.689
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
DC/AC
630 V DC / 220 V AC
Dimensions in Inches
Dimensions in Inches
L
H
T
S
L
H
T
S
0.413
0.413
0.413
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.827
0.827
0.827
0.827
0.827
0.827
0.827
1.142
1.142
1.142
1.142
1.142
1.142
1.142
0.295
0.315
0.315
0.315
0.335
0.354
0.374
0.394
0.413
0.433
0.453
0.433
0.453
0.472
0.512
0.571
0.591
0.630
0.591
0.630
0.650
0.768
0.807
0.846
0.906
0.197
0.177
0.177
0.177
0.177
0.197
0.217
0.236
0.256
0.276
0.295
0.236
0.256
0.276
0.315
0.315
0.335
0.374
0.335
0.374
0.394
0.394
0.433
0.472
0.512
0.295
0.295
0.295
0.591
0.591
0.591
0.591
0.591
0.591
0.591
0.591
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.827
0.827
0.827
0.827
0.827
0.827
0.827
1.142
1.142
1.142
1.142
1.220
1.220
1.220
0.335
0.335
0.354
0.374
0.413
0.413
0.433
0.413
0.433
0.453
0.472
0.492
0.571
0.610
0.551
0.610
0.630
0.728
0.748
0.787
0.827
0.197
0.177
0.197
0.217
0.217
0.256
0.276
0.236
0.236
0.256
0.276
0.315
0.335
0.354
0.335
0.354
0.354
0.354
0.374
0.413
0.453
0.591
0.591
0.591
0.591
0.591
0.591
0.591
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.984
0.984
0.984
0.984
1.083
1.083
1.083
Sharma Film Capacitors
MKT D03
SERIES
Formerly MPD 3 series
INTRODUCTION:
The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of
values and voltages. This series provides alternative dimensions for the same
values covered by the other MKTD series. These capacitors are suitable for
applications such as Blocking, By-passing and Coupling and are widely used in
General communication equipment.
FEATURES:
Wide value and Voltage range
Self healing capability
Flame retardant powder epoxy encapsulation
Minimum overall dimensions due to dip coated construction
•
•
•
•
GENERAL SPECIFICATIONS:
Dissipation factor: < 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K
Hz for capacitance> 1.0 µF. Insulation resistance: For 100 VDC rated parts;
≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF at a
temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ≥ 15,000 M Ohms for
C≤ 0.33 µF, ≥ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C
Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M). Voltage Test : 1.6
times the rated voltage applied between terminals for 2 seconds. at a temperature
of 25 ± 5 °C. Temperature range: -55 to 85 °C. Climatic category: F M F
DIMENSIONS AND
TOLERANCES:
d - 0.6 mm (0.024") for
Lead Spacing "s" = 10.0
mm (0.40")
d - 0.8 mm (0.032") for
Lead Spacing "s" > 10.0
mm (0.40")
z - 1.5mm ( 0.06" ) max.
LL'' - 20.0 mm
min.(0.78")
Tolerance on "s" ±
1.0mm (0.04") for s ≤15mm(0.6”).
Tolerance on "s" ± 1.5mm (0.06") for s ≤20mm(0.78”).
Tolerance on "s" ± 2.0mm (0.08") for s ≤27.5mm(1.08”).
PULSE RISE TIME (dv/dt) Volts per µsec.
LEAD
SPACING
mm
(inches)
Rated
10.0
15.0
22.5
27.0
Voltage
(0.40)
(0.60)
(0.89)
(1.06)
100
6
3
2
1
250
11
7
4
3
400
20
10
5.5
5
630
30
15
8
7
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1.
2.
3.
4.
Capacitance change shall remain within ±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Inches 100V • 250V • 400V • 630V
Case Dimensions in Millimeters 100V • 250V • 400V • 630V
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Dimensions in Millimeters
L
H
T
S
L
H
T
S
10.0
10.0
10.0
10.0
10.0
11.0
12.5
12.5
12.5
14.0
15.0
13.5
16.5
19.0
21.0
22.0
23.5
24.0
26.0
5.5
6.0
6.0
6.0
6.0
6.5
7.0
8.0
8.0
9.0
10.0
8.0
9.5
11.5
12.5
13.0
14.0
15.5
21.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
20.0
20.0
27.5
27.5
27.5
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
24.0
24.0
24.0
30.0
30.0
33.0
33.0
10.0
10.0
10.0
10.0
10.0
11.0
12.5
12.5
13.0
14.0
16.0
14.0
18.0
23.0
23.0
24.0
24.0
26.0
5.5
6.0
6.0
6.0
6.0
6.5
7.0
8.0
7.0
8.0
9.5
9.5
10.5
13.5
13.5
16.5
18.0
20.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
20.0
20.0
20.0
27.5
27.5
30.0
30.0
VOLTAGE
400 V DC / 200 V AC
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
Dimensions in Millimeters
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.5
13.5
18.0
18.0
18.0
24.0
24.0
30.0
30.0
30.0
Capacitance
in
DC/AC
250 V DC / 160 V AC
DC/AC
630 V DC / 220 V AC
Dimensions in Millimeters
Dimensions in Millimeters
L
H
T
S
L
H
T
S
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
24.0
30.0
30.0
30.0
33.0
33.0
10.0
10.0
10.0
11.0
11.5
12.5
11.0
14.0
16.5
16.5
17.5
18.0
21.5
24.0
26.0
28.0
5.5
6.0
6.0
6.5
7.0
7.0
6.0
8.0
9.5
10.0
10.5
10.5
12.0
14.0
18.0
21.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
20.0
27.5
27.5
27.5
30.0
30.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
24.0
24.0
30.0
30.0
30.0
33.0
10.5
11.0
11.0
10.0
11.0
12.0
15.0
15.5
16.5
18.0
22.0
23.5
25.5
28.0
6.0
6.5
6.5
6.5
7.0
8.0
8.5
11.0
10.5
12.0
12.5
14.0
15.0
20.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
20.0
20.0
27.5
27.5
27.5
30.0
VOLTAGE
100 V DC / 63 V AC
Capacitance
in
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Dimensions in Inches
H
T
S
L
H
T
S
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.531
0.531
0.709
0.709
0.709
0.945
0.945
1.181
1.181
1.181
0.394
0.394
0.394
0.394
0.394
0.433
0.492
0.492
0.492
0.551
0.591
0.531
0.650
0.748
0.827
0.866
0.925
0.945
1.024
0.217
0.236
0.236
0.236
0.236
0.256
0.276
0.315
0.315
0.354
0.394
0.315
0.374
0.453
0.492
0.512
0.551
0.610
0.846
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.787
0.787
1.083
1.083
1.083
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.709
0.709
0.945
0.945
0.945
1.181
1.181
1.299
1.299
0.394
0.394
0.394
0.394
0.394
0.433
0.492
0.492
0.512
0.551
0.630
0.551
0.709
0.906
0.906
0.945
0.945
1.024
0.217
0.236
0.236
0.236
0.236
0.256
0.276
0.315
0.276
0.315
0.374
0.374
0.413
0.531
0.531
0.650
0.709
0.787
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.787
0.787
0.787
1.083
1.083
1.181
1.181
VOLTAGE
400 V DC / 200 V AC
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
Dimensions in Inches
L
Capacitance
in
DC/AC
250 V DC / 160 V AC
DC/AC
630 V DC / 220 V AC
Dimensions in Inches
Dimensions in Inches
L
H
T
S
L
H
T
S
0.512
0.512
0.512
0.512
0.512
0.512
0.709
0.709
0.709
0.709
0.945
1.181
1.181
1.181
1.299
1.299
0.394
0.394
0.394
0.433
0.453
0.492
0.433
0.551
0.650
0.650
0.689
0.709
0.846
0.945
1.024
1.102
0.217
0.236
0.236
0.256
0.276
0.276
0.236
0.315
0.374
0.394
0.413
0.413
0.472
0.551
0.709
0.827
0.394
0.394
0.394
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.787
1.083
1.083
1.083
1.181
1.181
0.512
0.512
0.512
0.709
0.709
0.709
0.709
0.709
0.945
0.945
1.181
1.181
1.181
1.299
0.413
0.433
0.433
0.394
0.433
0.472
0.591
0.610
0.650
0.709
0.866
0.925
1.004
1.102
0.236
0.256
0.256
0.256
0.276
0.315
0.335
0.433
0.413
0.472
0.492
0.551
0.591
0.787
0.394
0.394
0.394
0.591
0.591
0.591
0.591
0.591
0.787
0.787
1.083
1.083
1.083
1.181
Sharma Film Capacitors
MKTD04 SERIES
Features
- Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing.
- Self-healing metallized polyester dielectric, Non-inductive construction.
- High performance and efficiencies. Custom values, voltages, and case sizes available upon request.
Application
- Multi-purpose
- Blocking & coupling
- By-passing & Filtering, Timing
Specifications
Capacitance Range
Operating temperature
Rated Voltage
Capacitance Tolerance
Tangent of Loss Angle
Insulation Resistance
Voltage Test
Endurance
Damp Heat
Construction
Lead Material Color of Body
Markings
0.001µF to 1.0µF
-40 to +85°C (up to 100°C - derate voltage 1.25% per °C )
50/63, 100, 250, 400, 630, 1000V dc
±2(G), ±5(J), ±10(K) %
0.008 or LESS (at 1KHz +25°C)
Voltage Charge : 1 min at +25°C, ±5°C
50 Vdc for Vr<100Vdc, 100Vdc for Vr≥100Vdc
9,000 or more, c≤0.33µf
5000S or more c>0.33µf
1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal)
+85°C, ±2°C, 1.25 x Vr, 1000Hr
Cap Change: < ±5%, DF Change : <50x10 at 1khz
Insulation Resistance: <50% of limit value
+40°C±2°C, 93% ±2%, 21days
Cap Change: < ±5%, DF Change : <50x10 at 1khz
Insulation Resistance: <50% of limit value
Non-inductive wound metallized polyester film
Epoxy dipped encasement, Flame retardant to UL94V-0
Solder coated or Tinned solid wire
Orange/Brown
Capacitance, Tolerance, Voltage
When space permits, Capacitor Type will be marked
- Special size or items on request.
- Tolerance Dimension ±0.5 mm.
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance
50/63DC
µF code Tmax Hmax Wmax P
0.0010 102 3.0 5.0 9.3 7.5
0.0012 122 3.0 5.0 9.3 7.5
0.0015 152 3.0 5.0 9.3 7.5
0.0018 182 3.0 5.0 9.3 7.5
0.0022 222 3.0 5.0 9.3 7.5
0.0027 272 3.0 5.0 9.3 7.5
0.0033 332 3.0 5.0 9.3 7.5
0.0039 392 3.0 5.0 9.3 7.5
0.0047 472 3.0 5.0 9.3 7.5
0.0056 562 3.0 5.0 9.3 7.5
0.0068 682 3.0 5.0 9.3 7.5
0.0082 822 3.0 5.0 9.3 7.5
0.010 103 3.0 5.0 9.3 7.5
0.012 123 3.0 5.0 9.3 7.5
0.015 153 3.0 5.0 9.3 7.5
0.018 183 3.0 5.0 9.3 7.5
0.022 223 3.0 5.0 9.3 7.5
0.027 273 3.0 5.0 9.3 7.5
0.033 333 3.0 5.2 9.3 7.5
0.039 393 3.0 5.2 9.3 7.5
0.047 473 3.0 5.2 9.3 7.5
0.056 563 3.0 5.2 9.3 7.5
0.068 683 3.0 5.2 9.3 7.5
0.082 823 3.0 5.2 9.3 7.5
0.10 104 3.0 5.2 9.3 7.5
0.12 124 3.0 5.5 9.3 7.5
0.15 154 3.0 6.0 9.3 7.5
0.18 184 3.3 6.5 9.3 7.5
0.22 224 3.5 6.5 9.3 7.5
0.27 274 4.0 7.0 9.3 7.5
0.33 334 4.0 7.5 9.3 7.5
0.39 394 4.5 7.8 9.3 7.5
0.47 474 4.8 8.0 9.3 7.5
0.56 564 5.0 9.0 9.3 7.5
0.68 684 5.2 9.2 9.3 7.5
0.82 824 5.8 10.8 9.3 7.5
1.0 105 5.8 10.8 9.3 7.5
Tel: (949) 642-7324
d
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
Tmax
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.3
3.5
4.0
4.0
4.5
4.8
5.0
5.2
5.8
5.8
100VDC
Hmax Wmax P
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.2 9.3 7.5
5.5 9.3 7.5
6.0 9.3 7.5
6.5 9.3 7.5
6.5 9.3 7.5
7.0 9.3 7.5
7.5 9.3 7.5
7.8 9.3 7.5
8.0 9.3 7.5
9.0 9.3 7.5
9.2 9.3 7.5
10.8 9.3 7.5
10.8 9.3 7.5
SECI Engineers & Buyers' Guide
d Tmax
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6 3.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
-
250VDC
Hmax Wmax P
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.2 9.3 7.5
-
d
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
-
Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance
400V DC
µF code Tmax Hmax Wmax P
0.0010 102 3.0 5.0 9.3 7.5
0.0012 122 3.0 5.0 9.3 7.5
0.0015 152 3.0 5.0 9.3 7.5
0.0018 182 3.0 5.0 9.3 7.5
0.0022 222 3.0 5.0 9.3 7.5
0.0027 272 3.0 5.0 9.3 7.5
0.0033 332 3.0 5.0 9.3 7.5
0.0039 392 3.0 5.0 9.3 7.5
0.0047 472 3.0 5.0 9.3 7.5
0.0056 562 3.0 5.0 9.3 7.5
0.0068 682 3.0 5.0 9.3 7.5
0.0082 822
7.5
0.010 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
-
Tel: (949) 642-7324
d
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
-
Tmax
3.0
3.0
3.0
3.0
3.0
-
630V DC
Hmax Wmax P
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
5.0 9.3 7.5
-
SECI Engineers & Buyers' Guide
d
0.6
0.6
0.6
0.6
0.6
-
1000V DC
Tmax Hmax Wmax P
d
3.0 5.0 9.3 7.5 0.6
3.0 5.0 9.3 7.5 0.6
3.0 5.0 9.3 7.5 0.6
-
Fax: (949) 642- 7327
Sharma Film Capacitors
Taping Specifications For Automatic Insertion
Description
Symbol
Lead wire diameter
Taping pitch
Sprocket hole pitch
Centering of the lead wire
Centering of the body
Lead spacing
Component alignment
Height from sprocket hole
Height
Center to the comp body
Tape width
Width of adhesive tape
Sprocket hole alignment
Position of adhesive tape
Sprocket hole diameter
Tape thickness
Фd
P
P0
P
P2
F
∆h
H1
H
L
W
W0
W1
W2
D0
T
Dimensions (mm)
Lead Spacing 7.5mm
0.6
12.7
12.7
3.75
0
7.5
0
20.0
16.0
11.0
18.0
13.0
9.0
3max
4.0
0.7
Toll
±0.05
±0.1
±0.2
±0.5
±0.8
±2.0
±0.5
±0.5
±0.5
+1.0-0.5
±0.5
±0.5
±0.2
±0.2
Standard Packing Quantity For Box
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
50-100V
102-124
1800PCS
values
154-224
1500PCS
values
274-474
1200PCS
values
564-824
1000PCS
values
-
-
-
-
250V
102-273
2000PCS
values
333-524
1500PCS
values
154-184
1200PCS
values
224-274
1000PCS
values
334-474
800PCS
values
564-684
700PCS
values
Tel: (949) 642-7324
400V
102-822
2000PCS
values
103-223
1500PCS
values
273-393
1200PCS
values
473-563
1000PCS
values
683-823
800PCS
values
104
700PCS
value
630V
1000V
102-392
102-182
2000PCS
2000PCS
values
values
472-822
222-332
1500PCS
1500PCS
values
values
103-123
392-822
1200PCS
1200PCS
values
values
153-223
103
1000PCS
1000PCS
values
value
273-333
800PCS
values
393
700PCS
value
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
MKTD05 SERIES
Features
- Very small size, Epoxy coating, Flame retardant to UL94V-0 5mm Lead spacing.
- Self-healing metallized polyester dielectric, Non-inductive construction.
- High performance and efficiencies. Custom values, voltages, and case sizes available upon request.
Application
- Multi-purpose
- Blocking & coupling
- By-passing & Filtering, Timing
Specifications
Capacitance Range
Operating Temperature
Rated Voltage
Capacitance Tolerance
Tangent of Loss Angle
Insulation Resistance
Voltage Test
Endurance
Damp Heat
Construction
Lead Material Color of Body
Markings
0.001µF to 1.0µF
-40 to +85°C (up to 100°C - derate voltage 1.25% per °C )
50/63, 100, 250, 400, 630V DC
±2(G), ±5(J), ±10(K) %
0.008 or LESS (at 1KHz +25°C)
Voltage Charge : 1 min at +25°C, ±5°C
50 Vdc for Vr<100Vdc, 100Vdc for Vr≥100Vdc
9,000 or more, c≤0.33µf
5000S or more c>0.33µf
1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal)
+85°C, ±2°C, 1.25 x Vr, 1000Hr
Cap Change: < ±5%, DF Change : <50x10 at 1khz
Insulation Resistance: <50% of limit value
+40°C±2°C, 93% ±2%, 21days
Cap Change: < ±5%, DF Change : <50x10 at 1khz
Insulation Resistance: <50% of limit value
Non-inductive wound metallized polyester film
Epoxy dipped encasement, Flame retardant to UL94V-0
Solder coated or Tinned solid wire
Orange/Brown
Capacitance, Tolerance, Voltage
When space permits, Capacitor Type will be marked
- Special size or items on request.
- Tolerance Dimension ±0.5 mm.
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance
µF code
0.001 102
0.0012 122
0.0015 152
0.0018 182
0.0022 222
0.0027 272
0.0033 332
0.0039 392
0.0047 472
0.0056 562
0.0068 682
0.0082 822
0.010 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
Tmax
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.5
4.0
4.0
4.3
4.8
5.0
5.5
5.8
6.3
6.3
6.3
Hmax
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.3
5.3
5.5
5.5
6.5
7.0
7.0
8.0
8.0
9.0
9.5
9.5
10.5
10.5
10.5
Tel: (949) 642-7324
50/63VDC
Wmax
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
6.8
P
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
d
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Tmax
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.5
4.0
4.0
4.3
4.8
5.0
5.5
5.8
6.3
6.3
6.3
100VDC
Hmax
Wmax
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.0
6.8
5.3
6.8
5.3
6.8
5.5
6.8
5.5
6.8
6.5
6.8
7.0
6.8
7.0
6.8
8.0
6.8
8.0
6.8
9.0
6.8
9.5
6.8
9.5
6.8
10.5
6.8
10.5
6.8
10.5
6.8
SECI Engineers & Buyers' Guide
P
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
d
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance
250VDC
µF code Tmax Hmax Wmax P
0.0010 102 3.2 5.0 6.8 5.0
0.0012 122 3.2 5.0 6.8 5.0
0.0015 152 3.2 5.0 6.8 5.0
0.0018 182 3.2 5.0 6.8 5.0
0.0022 222 3.2 5.0 6.8 5.0
0.0027 272 3.2 5.0 6.8 5.0
0.0033 332 3.2 5.0 6.8 5.0
0.0039 392 3.2 5.0 6.8 5.0
0.0047 472 3.2 5.0 6.8 5.0
0.0056 562 3.2 5.0 6.8 5.0
0.0068 682 3.2 5.0 6.8 5.0
0.0082 822 3.2 5.0 6.8 5.0
0.010 103 3.2 5.0 6.8 5.0
0.012 123 3.2 5.0 6.8 5.0
0.015 153 3.2 5.0 6.8 5.0
0.018 183 3.2 5.0 6.8 5.0
0.022 223 3.2 5.0 6.8 5.0
0.027 273 3.2 5.0 6.8 5.0
0.033 333 3.2 5.0 6.8 5.0
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
-
Tel: (949) 642-7324
d
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
-
Tmax
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
-
400VDC
Hmax Wmax P
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
-
SECI Engineers & Buyers' Guide
d Tmax
0.5 3.2
0.5 3.2
0.5 3.2
0.5 3.2
0.5 3.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
-
630VDC
Hmax Wmax P
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
5.0 6.8 5.0
-
Fax: (949) 642- 7327
d
0.5
0.5
0.5
0.5
0.5
-
Sharma Film Capacitors
Taping Specifications For Automatic Insertion
Description
Symbol
Lead wire diameter
Taping pitch
Sprocket hole pitch
Centering of the lead wire
Centering of the body
Lead spacing
Component alignment
Height from sprocket hole
Height
Center to the comp body
Tape width
Width of adhesive tape
Sprocket hole alignment
Position of adhesive tape
Sprocket hole diameter
Tape thickness
Фd
P
P0
P1
P2
F
∆h
H1
H0
L
W
W0
W1
W2
D0
T
Dimensions (mm)
Lead Spacing 5mm
0.3
12.7
12.7
3.85
6.35
5.0
0
20.0
16.0
11.0
18.0
13.0
9.0
3max
4.0
0.7
Toll
±0.05
±0.1
±0.2
±0.5
±1.3
±0.8
±2.0
±0.5
±0.5
±0.5
+1.0-0.5
±0.5
±0.5
±0.2
±0.2
Standard Packing Quantity For Box
50-100V
102-104 values 2000PCS
124-182 values 1500PCS
224-474 values 1200PCS
564-824 values 1000PCS
105-125 values 800PCS
Tel: (949) 642-7324
250V
102-183 values
223-333 values
393-473 values
563-823 values
104-224 values
2000PCS
1500PCS
1200PCS
1000PCS
800PCS
SECI Engineers & Buyers' Guide
400V
102-822 values
103-153 values
183-273 values
333-393 values
474-563 values
2000PCS
1500PCS
1200PCS
1000PCS
800PCS
Fax: (949) 642- 7327
Sharma Film Capacitors
MKTD06 SERIES
Features
- Metallized polyester film, epoxy resin coating
- Large C-values in small dimensions
- Excellent self-healing properly and high reliability
Specifications
Operating Temperature
Rated Voltage
Capacitance Range
Capacitance Tolerance
Dissipation Factor
-40+85°C
DC 250V, 400V, 630V
0.01 to 6.8 Mfd
±5%, ±10%
<0.01 (At 1KHz)
Cr≤0.33µF:≥7,500Mohm, Ur >100V
Cr>0.33µF: >25,000Mohm·µF, Ur >100V
1.4 Ur (Is)
Insulation Resistance
Voltage Test
- Special size or items on request.
- Tolerance Dimension ±1.0 mm.
VDC
Mfd
0.01
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
Tel: (949) 642-7324
W
12
12
12
12
12
12
12
12
12
12
12
12
250VDC
T
H
6
8.5
6
8.5
6
8.5
6
9.5
6
9.5
6
9.5
6
9.5
6
9.5
6
9.5
6
9.5
6
9.5
6
9.5
P
10
10
10
10
10
10
10
10
10
10
10
10
W
11.5
11.5
11.5
12
12
12
12
12
12.5
12.5
12.5
12.5
400VDC
T
H
5
8
5
8
5
8
5
9
5
9
5
9
5
9
5
9
5
9
5
9
5
9
6 10.5
SECI Engineers & Buyers' Guide
P
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
W
12
12
12
13
13
13
13
17.5
17.5
17.5
17.5
17.5
630VDC
T
H
5
8.5
5
8.5
5
8.5
6
9.5
6
9.5
6
10
6
10
6
10
6
10
6
10
6 10.5
6
11
Fax: (949) 642- 7327
P
10
10
10
10.5
10.5
15.5
15.5
15.5
15.5
15.5
15.5
15.5
Sharma Film Capacitors
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.50
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.5
2.7
6.8
13
13
13
13
17
17
17
17
18
18
18
23
23
23
24
28
28
28
32
6.5
7
7
7
7
7
7
7
7
7
7.5
7.5
7.5
8
8
8.5
8.5
9
10
10.5
10.5
10.5
10.5
10.5
10.5
11.5
11.5
11.5
13.5
13.5
13.5
13.5
14.5
14.5
16
18
18
18
10.5
10.5
10.5
10.5
15
15
15
15
15
15
15
20
20
20
20
25
25
25
30
17.5 6.5 9.5
17.5 5.5 9.5
17.5 5.5 9.5
17.5 5.5 9.5
19 7.5 12.5
19 7.5 9.5
19 7.5 15.5
22.5 5.5 11.5
23.5 6 11.5
23.5 8
12
23.5 8
12
23.5 8.5 18.5
28 8.5 18
28 9.5 18
28 9.5 18
30
10
19
30 10.5 19.5
30 10.5 19.5
30 10.5 19.5
15.5
15.5
15.5
15.5
16.0
20.5
16.0
20.5
20.5
25.5
25.5
20
20
25.5
25.5
28
28
28
28
17.5
17.5
23
23
23
23
23
23
23
28.5
28.5
28.5
28.5
28.5
28.5
30.5
30.5
30.5
30.5
8
8
8.5
8.5
8.5
8.5
9
9
9
9.5
9.5
10.5
10.5
13.5
13.5
13.5
13.5
13.5
13.5
13
13
14.5
14.5
14.5
14.5
15
15
15
18
18
19
19
22
22
22
22
22
22
15.5
15.5
20.5
20.5
20.5
20.5
20.5
25.5
25.5
25.5
25.5
25.5
25.5
25.5
25.5
28.5
28.5
28.5
28.5
*All sizes for reference only *
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
MKT 00S SERIES
Formerly SMX series
DIMENSIONS
AND
TOLERANCES:
INTRODUCTION
The MKT00S Series Metallized Polyester Film Capacitors are miniature capacitors
specially developed for Surface Mount Technology. This series covers a wide range
of values and voltages in three convenient case sizes and have excellent electrical
characteristics. The MKT00S series has fire retardant epoxy molded encapsulation
which also provide high insulation resistance.
"d" - 0.5 - 0.6 mm
(0.020" - 0.024")
for dimension "T"
< 3.5mm (0.138")
"d" - 0.6 mm
(0.024")
for dimension
"T" > 3.5mm
(0.138")
"LL'' - 4.0 +1.5mm
(0.16 + 0.06")
for bulk supply
FEATURES
miniature size
• Ultra
Wide
and voltage range in just three case sizes
• Flamevalue
retardant
epoxy encapsulation
• Consistent dimensions
and surface finish due to molded construction
• Compatible with all popular
high speed assembly machines
• Available in Carrier Tape, Stick
and Bulk packing
• Self healing capability
•
• Compatible with all standard standard SMT soldering methods
CASE SIZE TABLE
VOLTAGE V DC (Voltage Code)
GENERAL SPECIFICATIONS:
Dissipation factor: 0.0070 max at 1 K Hz
Insulation resistance: >15,000 M Ohms at a temperature of 25 ± 5 °C, when
measured at: 10 ±1 V DC for 63V DC rated capacitors, 100 ±15 V DC for 100 to
400V DC rating and, 500 ±50 V DC for 630V DC rating.
Capacitance tolerance: ±10%(K). ±5%(J) available on request
Voltage Test : 1.5 times the rated voltage applied between terminals for 2 seconds.at a temperature of 25 ± 5 °C Temperature range: -40 to 105 °C with
derating above 85 °C. Climatic category: F M E
in
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage
applied at 85 °C for 1000 hours. After the test:
G
H
J
Dimensions
W
250
400
630
(2E)
(2G)
(2J)
G
G
H
H
G
G
G
G
G
H
H
J
J
Millimeters
H
H
J
J
H
J
J
H
H
J
PULSE RISE TIME (dv/dt) -
CASE DIMENSIONS TABLE
SIZE
100
(2A)
Volts per µSecond.
Capacitance change shall remain within ±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking
shall remain legible.
CASE
µF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
LIFE TEST DETAILS:
1.
2.
3.
4.
63
(1J)
Capacitance
Rated
Capacitance
dv/dt
Voltage
Range µF
Value
50
0.001-1.0
63
0.001-1.0
4
8
100
>0.0068
10
(Inches)
100
0.0033-0.0068
15
H
L
a
b
5.2 (0.205)
3.2 (0.126)
7.2 (0.283)
1.0 (0.039)
3.0 (0.118)
100
>0.0033
30
8.2 (0.323)
4.5 (0.177)
10.0 (0.394)
1.5 (0.059)
4.0 (0.157)
250
0.001-1.0
20
8.2 (0.323)
5.0 (0.197)
12.5 (0.492)
2.0 (0.079)
4.0 (0.157)
400
0.001-1.0
40
TOLRANCE ON DIMENSIONS: ±0.2mm (.008")
Ordering Information
(EXAMPLE)
Example at right indicates:
MKT 00S Series, 400 V DC, 0.047 µF,
10%, Stick Magazine packing
Series
M
K
T
2A
2E
0
0
2G
2J
S
2
G
Series Code: MKT 00S
Voltage Code
Voltage Code
DC Voltage
1J
63V
100V 250V
400V 630V
Capacitance
First Two Digits Represent Significant Figures of Capacitance in Picofarads.
Third Digit Indicates Number of Zeros
Tolerance
Capacitance Tolerance Code:
Capacitance Tolerance ± 20%
Code
M
Packing Method Code
Packing Code
Method
Case Sizes
O
T
S
Bulk Tape Stick
G,H,J
G
H, J
± 10%
K
±5%
J
4
7
3
K
S
Sharma Film Capacitors
MKT 00S Packaging Specification
LEADER SPECIFICATIONS
TAPE DIMENSIONS
DIMENSION
DIMENSION
in MILLIMETERS
DIMENSION
in INCHES
A
5.6
±0.3
0.220
±0.012
B
7.6
±0.3
0.299
±0.012
W
12
±0.3
0.472
±0.012
F
5.5
±0.05
0.217
±0.002
E
1.75
±0.1
0.069
±0.004
DIMENSION
DIMENSION
in MILLIMETERS
DIMENSION
in INCHES
P2
2
±0.05
0.079
±0.002
P0
4
±0.1
0.157
±0.004
D0
1.5
±0.1
0.059
±0.004
T
0.3
±0.1
0.012
±0.004
T2
4.2
±0.2
0.165
±0.008
P1
8
±0.1
0.315
±0.004
DIMENSION
DIMENSION
in MILLIMETERS
DIMENSION
in INCHES
A
40
min
1.575
min
B
40
min
1.575
min
C
550 to
1200
21.65 to
47.24
REEL DIMENSIONS (500 pcs/Reel)
PEEL-OFF
STICK MAGAZINE DIMENSIONS
Dimensions in Millimeters
A
B
C
D
E
W
t
ø178 ±2.0
ø50 min.
13.0 ±0.5
21.0 ±0.8
2.0 ±0.8
8.8/12.8 ±1.5
2.0 ±0.5
ø330 ±2.0
ø100 min.
13.0 ±0.5
21.0 ±0.8
2.0 ±0.8
8.8/12.8 ±1.5
2.0 ±0.6
Dimensions in Inches
DIMENSION
DIMENSION
in MILLIMETERS
DIMENSION
in INCHES
A
10.5
±0.2
0.413
±0.008
a
9.1
±0.2
0.358
±0.008
B
9.5
±0.2
0.374
±0.008
DIMENSION
DIMENSION
in MILLIMETERS
DIMENSION
in INCHES
C
5
±0.2
0.197
±0.008
D
2.5
±0.2
0.098
±0.008
L
670
±2.0
26.378
±0.080
b
6.3
±0.2
0.248
±0.008
A
B
C
D
E
W
t
ø7 ±0.08
ø2.0 min.
5.0 ±0.02
0.83 ±0.03
0.08 ±0.3
0.35/0.50 ±0.06
0.08 ±0.02
ø13 ±0.08
ø4.0 min.
5.0 ±0.3
0.83 ±0.03
0.08 ±0.3
0.35/0.50 ±0.06
0.08 ±0.02
STANDARD PACKING QUANTITY
CASE
SIZE
G
H
J
QUANTITY PER PACK
TAPE
STICK
BULK
500
NA
100
NA
60
100
NA
50
100
Sharma Film Capacitors
MKTR
SERIES
Formerly MPR series
INTRODUCTION
The MKTR Series Round Axial Metallized Polyester Film Capacitors
cover a wide range of values and voltages. These capacitors also
have good high frequency characteristics and are suitable for
applications such as Blocking, By-passing, Coupling and all General
Purpose applications.
L max.
1.4" max
1.4" max
D max.
d
FEATURES
value and Voltage range
• Wide
Tape
wrapped axial construction for different typed of mounting
• Reduced
due to taped wrapped encapsulation
• Self healingdimensions
capability
• Available in tape and reel form for automatic insertion
•
• Close tolerance ±1% and ±2% available on request
DIMENSIONS AND TOLERANCES
"d" = 0.6 mm (0.024") For D≤6.0 mm
"d" = 0.8 mm (0.032") For D>6.0 mm
PULSE RISE TIME (dv/dt) Volts per µsec.
(please check with us about availability of specific values)
RATED
VOLTAGE
dv / dt rating
in volts / µ seconds
100
160
1
2
250
400
630
1000
3
5
7
10
GENERAL SPECIFICATIONS
Dissipation factor: ≤ 0.0100 at 1 K Hz
Insulation resistance: For 100 VDC
rated parts; ≥ 9,000 M Ohms for
C≤ 0.33 µF,
≥ 3,000 seconds for C> 0.33 µF
at a temperature of 25 ± 5 °C.
For 250 to 630 VDC rated parts;
≥ 15,000 M Ohms for C≤ 0.33 µF,
≥ 5,000 seconds for C> 0.33 µF
at a temperature of 25 ± 5 °C.
Capacitance tolerance: ±5%(J), ±10%(K) and
±20%(M).
Voltage Test : 1.6 times the rated voltage
applied between terminals for 2 seconds.
at a temperature of 25 ± 5 °C.
Temperature range: -40 to 85 °C with
derating above 85 °C.
Climatic category: G P D
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated
voltage or 100% AC rated voltage applied at
85 °C for 1000 hours. After the test:;
1. Capacitance change shall remain
within ±5%.
2. Dissipation Factor shall be within
1.5 times the original limits
3. Insulation Resistance shall be above
30% of the initial limits.
4. There shall be no remarkable change in
the appearance and the marking shall
remain legible.
Case Dimensions in Millimeters: 100V • 160V • 250V • 400V • 630V
VOLTAGE DC
VOLTAGE AC
Capacitance
in uF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
100
63
Dimensions
in MM
D
L
5
10.5
5
10.5
5
10.5
5
10.5
5.5
10.5
5.5
10.5
5.5
10.5
5.5
14
5.5
14
5.5
14
6.5
14
6.5
19
7.5
19
9.5
19
9.5
27
11
27
12.5
27
14
32
160
90
Dimensions
in MM
D
L
5
10.5
5
10.5
5
10.5
5
10.5
5.5
10.5
5.5
10.5
6
10.5
6
14
6.5
14
7.5
14
7.5
19
8
19
9.5
19
9.5
27
11
27
13
27
14
32
17
32
250
160
Dimensions
in MM
D
L
5
10.5
5
10.5
5
10.5
5
10.5
5.5
14
5.5
14
6
14
7
19
7
19
8
19
9.5
27
9.5
27
10.5
27
12.5
27
14
32
16
32
18.5
32
21.5
47
400
200
Dimensions
in MM
D
L
5
10.5
5.5
14
5.5
14
6
14
7
14
7
19
7.5
19
8.5
19
8.5
27
10
27
12.5
27
12.5
32
14.5
32
17.5
32
20.5
32
20.5
47
23
47
27
47
630
220
Dimensions
in MM
D
L
6
14
6.5
14
7
14
7
19
7.5
19
8.5
19
9
27
10.5
27
11.5
27
11.5
32
14
32
16.5
32
20
32
19
47
23
47
28
47
Case Dimensions in Inches: 100V • 160V • 250V • 400V • 630V
VOLTAGE DC
VOLTAGE AC
Capacitance
in uF
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
100
63
Dimensions
in Inches
D
L
0.197 0.413
0.197 0.413
0.197 0.413
0.197 0.413
0.217 0.413
0.217 0.413
0.217 0.413
0.217 0.551
0.217 0.551
0.217 0.551
0.256 0.551
0.256 0.748
0.295 0.748
0.374 0.748
0.374 1.063
0.433 1.063
0.492 1.063
0.551 1.260
160
90
Dimensions
in Inches
D
L
0.197 0.413
0.197 0.413
0.197 0.413
0.197 0.413
0.217 0.413
0.217 0.413
0.236 0.413
0.236 0.551
0.256 0.551
0.295 0.551
0.295 0.748
0.315 0.748
0.374 0.748
0.374 1.063
0.433 1.063
0.512 1.063
0.551 1.260
0.669 1.260
250
160
Dimensions
in Inches
D
L
0.197 0.413
0.197 0.413
0.197 0.413
0.197 0.413
0.217 0.551
0.217 0.551
0.236 0.551
0.276 0.748
0.276 0.748
0.315 0.748
0.374 1.063
0.374 1.063
0.413 1.063
0.492 1.063
0.551 1.260
0.630 1.260
0.728 1.260
0.846 1.850
400
200
Dimensions
in Inches
D
L
0.197 0.413
0.217 0.551
0.217 0.551
0.236 0.551
0.276 0.551
0.276 0.748
0.295 0.748
0.335 0.748
0.335 1.063
0.394 1.063
0.492 1.063
0.492 1.260
0.571 1.260
0.689 1.260
0.807 1.260
0.807 1.850
0.906 1.850
1.063 1.850
630
220
Dimensions
in Inches
D
L
0.236 0.551
0.256 0.551
0.276 0.551
0.276 0.748
0.295 0.748
0.335 0.748
0.354 1.063
0.413 1.063
0.453 1.063
0.453 1.260
0.551 1.260
0.650 1.260
0.787 1.260
0.748 1.850
0.906 1.850
1.102 1.850
Sharma Film Capacitors
MKTO
SERIES
Formerly MPO series
INTRODUCTION
The MKTO Series Flat Axial Metallized Polyester Film Capacitors cover a wide
range of values and voltages. These capacitors also have good high frequency
characteristics and are suitable for; Blocking, By-passing, Coupling and all
General Purpose applications. This series is specifically designed for mounting
in locations where height is critical or where different mounting options are
required.
(1.4“ min.)
DIMENSIONS AND TOLERANCES
"d" - 0.8 mm (0.032")
FEATURES:
value and Voltage range
• Wide
Flat
axial
for different types of mounting
• Reduced construction
dimensions
due
• Self healing capability to tape wrapped encapsulation
•
PULSE RISE TIME (dv/dt) Volts per µsec.
RATED
dv / dt rating
VOLTAGE
in volts / µ seconds
GENERAL SPECIFICATIONS
100
1
160
2
250
3
400
Dissipation factor: ≤ 0.0100 at 1 K Hz. Insulation resistance: For 100 VDC
630
rated parts;≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF
1000
at a temperature of
25 ± 5 °C. For 250 to 630
Case Dimensions in Millimeters: 100V • 250V • 400V • 630V
VDC rated parts;
≥ 15,000 M Ohms for C≤
VOLTAGE (DC)
100 V DC
250 V DC
0.33 µF ≥ 5,000 seconds for
VOLTAGE (AC)
63 V AC
160 V AC
Dimensions
Dimensions
C> 0.33 µF at a temperature
Capacitance
in Millimeters
in Millimeters
of 25 ± 5 °C. Capacitance
in µF
L
H
T
L
H
T
tolerance: ±5%(J), ±10%(K)
0.01
and ±20%(M) Voltage Test:
0.015
1.6 times the rated voltage
0.022
applied between terminals
0.033
0.047
for 2 seconds. at a tempera0.068
ture of 25 ± 5 °C
0.1
14.0
8.0
4.5
14.0
8.0
4.5
Temperature range: -40 to
0.15
14.0
8.0
4.5
14.0
9.0
5.0
85 °C with derating above
0.22
14.0
8.5
5.0
19.0
9.0
5.0
85 °C.
0.33
19.0
8.0
4.5
19.0
10.5
5.5
Climatic category: G P D
0.47
19.0
9.0
5.0
19.0
12.0
7.0
5
7
10
400 V DC
200 V AC
630 V DC
220 V AC
Dimensions
Dimensions
in Millimeters
L
19.0
H
10.0
in Millimeters
T
5.0
L
H
T
14.0
7.0
4.5
14.0
7.5
5.0
14.0
8.0
6.0
19.0
10.0
5.0
19.0
10.0
5.0
19.0
11.0
6.0
27.0
10.5
6.0
19.0
11.0
6.5
27.0
13.0
7.5
19.0
13.0
8.0
27.0
14.5
8.5
27.0
13.0
7.0
32.0
15.0
9.5
27.0
14.0
8.0
32.0
17.0
12.0
0.68
19.0
10.5
5.5
27.0
12.0
6.0
32.0
16.0
9.0
32.0
20.0
15.0
1
19.0
12.0
6.0
27.0
13.0
7.0
32.0
18.5
10.5
32.0
26.0
17.0
LIFE TEST DETAILS:
Capacitors shall withstand
125% DC rated voltage or
100% AC rated voltage
applied at 85 °C for 1000
hours. After the test:;
1. Capacitance change shall
remain within ±5%.
2. Dissipation Factor shall be
within 1.5 times the
original limits
3. Insulation Resistance shall
be above 50% of the
initial limits.
4. There shall be no
remarkable change in the
appearance and the
marking shall remain
legible.
(1.4“ min.)
1.5
19.0
14.0
8.5
32.0
15.0
8.5
32.0
22.0
12.0
47.0
23.5
16.5
2.2
27.0
14.0
7.0
32.0
16.5
10.0
32.0
24.0
16.0
47.0
25.5
17.5
47.0
34.0
21.0
3.3
27.0
17.0
9.5
32.0
20.5
12.0
47.0
23.5
15.0
4.7
32.0
18.0
10.0
32.0
25.0
14.0
47.0
27.0
18.0
6.8
32.0
21.0
11.0
47.0
23.0
14.0
47.0
34.0
22.0
Case Dimensions in Inches: 100V • 250V • 400V • 630V
VOLTAGE
(DC)
VOLTAGE
(AC)
Capacitance
in
µF
L
100 V DC
63 V AC
250 V DC
160 V AC
400 V DC
200 V AC
630 V DC
220 V AC
Dimensions
Dimensions
Dimensions
Dimensions
in Inches
in Inches
in Inches
H
T
L
H
T
L
H
in Inches
T
0.01
L
0.551
H
0.276
T
0.177
0.015
0.551
0.295
0.197
0.022
0.551
0.315
0.236
0.033
0.748
0.394
0.197
0.047
0.748
0.394
0.197
0.068
0.1
0.551
0.315
0.177
0.551
0.315
0.177
0.748
0.394
0.197
0.748
0.433
0.236
1.063
0.413
0.236
0.15
0.551
0.315
0.177
0.551
0.354
0.197
0.748
0.433
0.256
1.063
0.512
0.295
0.22
0.551
0.335
0.197
0.748
0.354
0.197
0.748
0.512
0.315
1.063
0.571
0.335
0.33
0.748
0.315
0.177
0.748
0.413
0.217
1.063
0.512
0.276
1.260
0.591
0.374
0.47
0.748
0.354
0.197
0.748
0.472
0.276
1.063
0.551
0.315
1.260
0.669
0.472
0.68
0.748
0.413
0.217
1.063
0.472
0.236
1.260
0.630
0.354
1.260
0.787
0.591
1
0.748
0.472
0.236
1.063
0.512
0.276
1.260
0.728
0.413
1.260
1.024
0.669
1.5
0.748
0.551
0.335
1.260
0.591
0.335
1.260
0.866
0.472
1.850
0.925
0.650
2.2
1.063
0.551
0.276
1.260
0.650
0.394
1.260
0.945
0.630
1.850
1.004
0.689
1.850
1.339
0.827
3.3
1.063
0.669
0.374
1.260
0.807
0.472
1.850
0.925
0.591
4.7
1.260
0.709
0.394
1.260
0.984
0.551
1.850
1.063
0.709
6.8
1.260
0.827
0.433
1.850
0.906
0.551
1.850
1.339
0.866
Sharma Film Capacitors
MKT FS
SERIES
INTRODUCTION:
The MKTFS Series Metallized Polyester Film Capacitors cover a wide range of
values and voltages. This series provides alternative dimensions for the same
values covered by the other MKTD series. These capacitors are suitable for
applications such as Blocking, By-passing and Coupling and are widely used in
General communication equipment.
DIMENSIONS AND
TOLERANCES:
d - 0.7 mm
FEATURES:
Wide value and Voltage range
Self healing capability
Flame retardant powder epoxy encapsulation
Minimum overall dimensions due to dip coated construction
LL - 20.0 mm min.
•
•
•
•
z - 3 mm max.
Tolerance on P ±1.5 mm
GENERAL SPECIFICATIONS:
Dissipation factor: < 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K
Hz for capacitance> 1.0 µF. Insulation resistance: For 100 VDC rated parts;
≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF at a
temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ≥ 15,000 M Ohms for
C≤ 0.33 µF, ≥ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C
Capacitance tolerance: ±5%(J) and ±10%(K). Voltage Test : 1.75 times the
rated voltage applied between terminals for 5 seconds. at a temperature of
25 ± 5 °C. Temperature range: -40 to 85 °C.
PULSE RISE TIME (dv/dt) Volts per µsec.
LEAD
SPACING
mm
(inches)
Rated
10.0
15.0
22.5
27.0
Voltage
(0.40)
(0.60)
(0.89)
(1.06)
100
6
3
2
1
250
11
7
4
3
400
20
10
5.5
5
630
30
15
8
7
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1.
2.
3.
4.
Capacitance change shall remain within ±5%.
Dissipation Factor shall be within 1.5 times the original limits.
Insulation Resistance shall be above 50% of the initial limits.
There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Millimeters 100V • 250V
Capacitance
in µF
L
0.01
0.015
0.022
0.033
0.047
0.056
0.068
0.082
0.1
0.15
0.22
0.33
0.47
0.56
0.68
1.0
1.5
2.2
3.3
4.7
10
Case Dimensions in Millimeters 400V • 630V
VOLTAGE DC/AC
100 V DC / 63 V AC
250 V DC / 160 V AC
Dimensions in Millimeters
H
T
P
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.5
18.5
18.5
18.5
24.0
30.0
30.0
37.0
9.5
9.5
9.5
9.5
10.0
10.0
10.0
10.0
9.5
1.5
11.0
11.0
11.0
11.0
12.0
13.5
15.5
16.0
19.0
20.0
25.0
5.0
5.0
5.0
5.0
5.5
5.5
5.0
5.5
5.0
5.5
5.5
6.0
6.0
5.5
6.0
7.5
8.5
9.0
12.0
12.0
18.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
16.0
16.0
16.0
16.0
21.5
21.5
26.5
32.5
L
Dimensions in Millimeters
H
T
P
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.5
18.5
18.5
24.0
24.0
30.0
30.0
30.0
9.5
9.5
9.5
9.5
10.0
10.0
10.0
10.0
9.5
10.5
11.0
11.5
12.5
13.0
13.5
13.0
16.5
17.0
21.0
24.0
5.0
5.0
5.0
5.0
5.5
5.5
5.0
5.5
5.0
5.5
6.0
6.0
6.0
6.5
7.0
6.0
8.5
9.0
12.0
15.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
15.0
15.5
15.5
21.0
21.5
27.0
27.5
27.5
Capacitance
in µF
VOLTAGE DC/AC
400 V DC / 200 V AC
630 V DC / 220 V AC
L
0.01
0.015
0.022
0.033
0.047
0.056
0.068
0.082
0.1
0.15
0.22
0.33
0.47
0.56
0.68
1.0
1.5
Dimensions in Millimeters
H
T
P
13.0
13.0
13.0
13.0
13.0
15.0
15.0
15.0
15.0
15.0
18.5
18.5
24.0
24.0
24.0
24.0
24.0
9.5
9.5
9.5
9.5
10.0
10.0
10.5
11.0
12.0
12.5
12.0
13.0
13.0
13.5
14.0
18.0
20.0
5.0
5.0
5.0
5.0
5.5
5.5
5.5
5.5
6.0
6.5
5.0
7.0
5.5
6.5
7.0
9.0
10.0
11.5
11.5
11.5
11.5
11.5
13.0
13.0
13.0
13.0
13.0
16.5
16.5
21.5
21.5
21.5
21.5
21.5
L
Dimensions in Millimeters
H
T
P
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
24.0
24.0
24.0
24.0
24.0
31.0
10.0
10.0
11.0
11.5
11.5
12.0
12.5
13.0
13.5
14.5
13.0
15.5
16.5
17.5
18.5
21.0
5.5
5.5
5.5
6.0
6.0
6.5
6.5
7.0
7.0
8.0
6.0
7.5
8.0
9.0
10.0
11.0
11.5
11.5
11.5
11.5
16.5
16.5
16.5
16.5
16.5
16.5
21.5
21.5
21.5
21.5
21.5
27.5
Sharma Film Capacitors
MKTMPX SERIES
SAFETY RECOGNIZED FILM CAPACITOR
1.
2.
3.
4.
5.
6.
Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric.
UL 1414 (250V AC), CUL 1414/Canda (250V VAC)
VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA:
DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677
Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer
circuits and available for EMI filter and switching power supply and radio-and
monitor, television application.
Flame retardant plastic cases and epoxy resin. (compliance with 94V-0)
Self-healing properties.
Proven series wound construction.
Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA.
V
D E
CQC
SPECIFICATIONS :
DISSIPATION FACTOR
MAXIMUM PULSE RISE TIME
-40 к to +100 к
280VAC
0.0022 ~ 4.7uF
Applied 1500VDC for 1minute or 2100VDC
for 1 second.
+-10% (K)
Measured after a charging voltage 100 ±15VDC
for 1 minute.
LESS THAN OR EQUAL TO 0.33PF Њ 30,000M:
GREATER THAN 0.33PF Њ 10,000M:ΗPF
0.1% MAX. at 1KHz
250 VAC: 120 V/microsecond.
PF SIZE
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.047
0.056
0.068
0.068
0.082
0.1
0.1
0.1
0.12
0.15
0.15
0.18
0.18
0.22
T
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
5.0
6.0
6.0
6.0
5.0
5.5
6.0
6.0
5.5
6.5
7.5
6.0
8.5
6.0
8.5
OPERATING TEMPERATURE
RATED VOLTAGE
CAPACITANCE RANGE
DIELECTRIC STRENGTH
CAPACITANCE TOLERANCE
INSULATION RESISTANCE
W
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
13.0
13.0
13.0
18.0
18.0
13.5
18.0
18.0
18.0
18.0
26.5
18.0
26.5
18.0
Dimension
H
9.0
9.0
9.0
9.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
11.0
12.0
12.0
12.0
11.0
12.0
12.0
12.0
11.5
13.0
13.5
15.0
14.5
16.0
14.5
P
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
10.0
10.0
10.0
15.0
15.0
10.0
15.0
15.0
15.0
15.0
22.5
15.0
22.5
15.0
dO
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
PF
SIZE
0.22
0.27
0.33
0.33
0.33
0.39
0.47
0.47
0.47
0.47
0.47
0.56
0.68
0.68
0.82
0.82
1.0
1.0
1.0
1.5
1.5
1.8
2.0
2.0
2.2
2.2
2.5
3.0
3.3
4.0
4.7
W
26.5
26.5
18.0
26.5
26.5
26.5
17.5
18.0
26.5
26.5
32.0
32.0
26.5
32.0
32.0
26.5
32.0
32.0
37.0
32.0
37.0
37.0
31.0
38.0
31.0
38.0
38.0
38.0
38.8
48.0
48.0
W max
T
max
H max
25 ±2.0
dO
P±0.5
H
16.5
16.5
14.5
16.5
17.0
20.0
19.0
16.0
17.0
20.0
20.0
20.0
20.0
20.0
22.0
20.0
20.0
22.0
25.0
22.0
26.5
29.0
31.0
28.0
31.0
29.0
30.0
30.0
31.3
30.0
30.0
(Unit : mm)
T
7.0
8.5
8.5
7.0
8.5
10.0
11.0
10.0
8.5
10.0
11.0
11.0
10.0
11.0
13.0
10.0
11.0
13.0
13.5
13.0
17.0
19.0
22.0
18.0
22.0
19.0
20.0
20.0
21.7
30.0
30.0
P
22.5
22.5
15.0
22.5
22.5
22.5
15.0
15.0
22.5
22.5
27.5
27.5
22.5
27.5
27.5
22.5
27.5
27.5
31.5
27.5
31.5
31.5
27.5
31.5
27.5
31.5
31.5
31.5
31.5
41.5
41.5
dO
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8D
Tolerance: +/- 0.5mm
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327