RoHS MLPCH11 High Current Multilayer Inductor Dimensions: .079±.008 (2.0±0.2) Inches (mm) 0.039 MAX (1.0) .020±.012 (0.5±0.3) .049±.008 (1.25±0.2) .102±.012 (2.6±0.3) Allied Part Number 0.039±.008 (1.0±0.2) .047±.008 (1.2±0.2) Recommended PCB Layout Features • • • • • Inductance Tolerance (%) (µ H) Test Freq. (MHz) DCR (Ω ±25%) Isat (mA) Typ. (Max) Irms(mA) Typ. (Max MLPCH11-R24M-RC 0.24 20 3 0.03 2700(3300) 2400(3200) MLPCH11-R47M-RC 0.47 20 3 0.06 1600(2000) 2200(3000) MLPCH11-1R0M-RC 1.0 20 3 0.10 1400(1700) 1800(2100) MLPCH11-2R2M-RC 2.2 20 3 0.125 500(800) 1600(1900) All specifications subject to change without notice. High Saturation current up to 3.3A Expanded operating temp range Low DC Resistance Multilayer Ferrite Construction Suitable for pick and place Electrical 3.5 3 2.5 L(µH) Inductance Range: .22µH to 2.2µH Tolerance: 20% Test Frequency: (L) 3MHz, 200mV Operating Temp: -55ºC to +125ºC (Including self-temperature rise) Isat: Based on Inductance drop 30% from initial value without current Irms: Based on 40°C temp rise above ambient 25°C. Under no condition should the temperature of part exceed 125°C. Inductance vs. Frequency Chaaracteristics 4 2R2 2 1.5 1R0 1 R47 0.5 0 R24 1 10 Frequency(MHz) 100 1000 Resistance to Soldering Heat Pre-heat: 150ºC, 1min Solder Composition: Sn/Ag3.0/Cu5.0 Solder Temperature: 260°C ± 5°C Immersion Time: 10Sec ± 1Sec Inductance vs. DC Current 4 3.5 3 Test Equipment Physical Packaging: 3000 pieces per 7 inch reel Marking: None 949-356-1780 L(µH) (L): HP4287A DCR: HP4338B 2R2 2.5 2 1.5 1R0 1 R47 0.5 0 R24 1 10 ALLIED COMPONENTS INTERNATIONAL 03/03/2017 100 DC Current(m A) 1000 10000 www.alliedcomponents.com