ALUMINUM ELECTROLYTIC CAPACITORS GJ Snap-in Terminal Type, Low-Profile Sized, Wide Temperature Range GU series Low Profile Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. Adapted to the RoHS directive (2002/95/EC). GJ Low Profile GJ(15) Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +105°C (160 ~ 250V) , – 25 ~ +105°C (315 ~ 400V) Rated Voltage Range 160 ~ 400V Rated Capacitance Range 39 ~ 680µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I tan δ 0.15 MAX. 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 120Hz 20°C Measurement frequency : 120Hz 160 ~ 250 3 12 Rated voltage(V) Stability at Low Temperature Impedance ratio ZT/Z20(MAX.) Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C 315 • 400 8 — Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 3000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Marking Printed with white color letter on black sleeve. Type numbering system (Example : 200V 330µF) Drawing 1 2 3 4 5 6 7 8 9 10 11 12 Polarity bar Sleeve (P.E.T.) LGJ 2D 331 MEL B 10 ±0. 0.8 +0.2 -0.1 10 20±2 2-2 f±0.1 4.0±0.5 Pressure relief vent 0.2 + 1 0.8 -0. Configuration Capacitance tolerancce (±20%) Rated Capacitance (330µF) Rated voltage (200V) Series name Type 4.0±0.5 2.5 f D +1MAX. 1 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) Case dia. code fD Code 20 Y 22 Z 25 A 30 B 35 C The other terminal is also available upon request. Please refer to page 237 for schematic of terminal dimensions. Dimensions Cod Cap.(µF) V(Code) 160V (2C) 180V (2Z) 200V (2D) 250V (2E) 315V (2F) 400V (2G) e 039 047 056 068 082 100 120 150 180 220 270 330 390 470 560 680 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 20 × 20 22 × 20 25 × 20 25 × 20 30 × 20 30 × 20 35 × 20 35 × 20 20 × 20 22 × 20 25 × 20 25 × 20 30 × 20 30 × 20 35 × 20 35 × 20 0.68 0.81 0.98 1.02 1.25 1.30 1.46 1.51 0.62 0.80 0.90 0.95 1.15 1.20 1.36 1.43 20 × 20 22 × 20 22 × 20 25 × 20 30 × 20 30 × 20 35 × 20 35 × 20 0.56 0.73 0.80 0.85 1.05 1.10 1.30 1.41 20 × 20 22 × 20 25 × 20 25 × 20 30 × 20 30 × 20 35 × 20 0.51 0.60 0.74 0.75 0.95 1.00 1.16 20 × 20 22 × 20 22 × 20 25 × 20 30 × 20 30 × 20 35 × 20 35 × 20 0.38 0.45 0.47 0.56 0.65 0.70 0.85 0.90 20 × 20 22 × 20 25 × 20 25 × 20 30 × 20 30 × 20 35 × 20 35 × 20 0.32 0.37 0.40 0.46 0.55 0.60 0.75 0.80 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 160 ~ 250V Coeff. 315 · 400V 50 0.81 0.77 60 0.85 0.82 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k~ 1.45 1.41 50k~ 1.50 1.43 Minimum order quantity : 50pcs. CAT.8100V