FIBER MANAGEMENT OFSRG Description The Optical Fiber Strain Relief Gland enables ruggedized patch cords, or fiber bundles, protected in OFBLT to be anchored to a chassis, or distribution trunking system, by the simple provision of a single hole. Optical Fiber Strain Relief Gland The OFBLT is passed through the gland and is secured by the integral Tube Gripper Clip. This ensures a pull out resistance of over 100N while still ensuring a 30mm radius bend control and crush protection. Features • OFBLT retention: >100N • Mid point or end termination of OFBLT • Provides secure fixing Part No. OFSRG-05-BLK Ø ”D” .59 (15.0) Miniflex technology manufactured by Richco - Patented Material: PVC • Color: Black Standard Pack: 10/bag Ø ”d1” Ø “d2” Ø ”A” .20 (5.0) .47 (12.0) .43 (11.0) “H” “W” 1.46 (37.0) 0.12 (3.0) Description OFD The Optical Fiber Duplexer enables cables with aramid strands to be broken out and mechanically terminated. It provides an easy-to-use assembly with no crimping, while still retaining a minimum of a 100N pull. Used with the 5mm diameter OFBLT at the output port, it gives full blend control and crush protection for ongoing fibers. The Duplexer gives an easy-to-use lay through facility with internal fiber radius control. Optical Fiber Duplexer The Duplexer gives a range of input adapters to cover OFBLT, fiber bundles, cable and patch cords from 2.5mm to 7.00mm in diameter. For cables up to 10.8mm in diameter, a rubber sleeve is provided. See cable size chart below. Part Number “L“ “W“ “w“ “H“ “d“ OFD series 1.95 (49.6) 0.64 (16.2) 0.52 (13.2) 0.31 (8.0) 0.20 (5.0) Miniflex technology manufactured by Richco - Patented Material: Flame Retardant Nylon, RMS-19 (UL 94V0); Color: Black Standard Pack: 10/bag Part Number Incoming Cable Size Diameter Adapter Color Features • Tube retention: >100N • For a Development Kit containing all adapters, order: OFD-C-05-19BLK OFD-C-1-05-19BLK OFD-C-2-05-19BLK OFD-C-3-05-19BLK OFD-C-4-05-19BLK OFD-C-5-05-19BLK OFD-C-6-05-19BLK OFD-C-9-05-19BLK OFD-C-7-05-19BLK OFD-C-8-635-19BLK .098 - .138 (2.5 - 3.5) .118 - .157 (3.0 - 4.0) .161 - .197 (4.1 - 5.0) .200 - .236 (5.1 - 6.0) .240 - .276 (6.1 - 7.0) .280 - .335 (7.1 - 8.5) .335 - .425 (8.5 - 10.8) .197 (5.0) OFBLT .250 (6.35) OFBLT Black Blue Brown Green Red Black Rubber Black Rubber Split Black Split Blue OFCPA Optical Fiber Cable and Patch Cord Anchor J Features • OFBLT retention: >100N • The OFCPA can also be used as a tube to tube uniter from OFBLT to OFBLT • For a Development Kit containing all adapters order: OFCPA-05-19BLK 206 Description The Optical Fiber Cable and Patch Cord Anchor enables cables with aramid strands or similar strength reinforcement to be mechanically terminated. It provides an easy-to-use assembly with no crimping, while still retaining a minimum of 100N pull out. Up to 4 patch cords Ø2.5mm can be terminated in one anchor. Part Number “D” Ø “A” “d” Ø “L” OFCPA series .51 (13.0) .31 (8.0) .20 (5.0) 1.46 (37.0) Miniflex Technology manufactured by Richco - Patented Material: Flame Retardant Nylon 6/6 UL94 V0, RMS-19; Color: Black Standard Pack: 10/bag Part Number Incoming Cable Size Diameter Adapter Color OFCPA-1-05-19BLK OFCPA-2-05-19BLK OFCPA-3-05-19BLK OFCPA-4-05-19BLK OFCPA-5-05-19BLK OFCPA-6-05-19BLK OFCPA-7-05-19BLK OFCPA-T-05-19BLK OFCPA-T-635-19BLK 773-539-4060 Samples: 1-800-621-1892 .098 - .137 (2.5 - 3.5) .118 - .157 (3.0 - 4.0) .161 - .196 (4.1 - 5.0) .200 - .236 (5.1 - 6.0) .240 - .275 (6.1 - 7.0) .280 - .335 (7.1 - 8.5) .335 - .425 (8.5 - 10.8) .196 (5.0) OFBLT .196-.250 (5.0-6.35) OFBLT Black Blue Brown Green Red Black Rubber Black Rubber Split Black Split Blue