RA T (A ED m R ps M )M SC ax UR RE NT LE A (µ KA H) G Ty E IN pi D ca U l CT AN CE (O hm s) Ma x. DC R L1 o ±2 r L 5% 2 I (µ NDU H) C TA NC E NU MB ER Surface Mount Common Mode Choke PA RT Series CM6460 FERRITE CORE CM6460-104 CM6460-154 CM6460-224 CM6460-334 CM6460-504 CM6460-754 CM6460-105 CM6460-125 CM6460-185 CM6460-225 CM6460-335 CM6460-505 CM6460-755 CM6460-106 100 150 220 330 500 750 1000 1200 1800 2200 3300 5000 7500 10000 0.006 0.010 0.012 0.017 0.024 0.035 0.049 0.068 0.106 0.150 0.210 0.320 0.640 0.900 7.00 5.50 5.00 4.00 3.30 2.70 2.20 1.70 1.40 1.10 0.85 0.70 0.44 0.33 0.7 1.0 1.4 1.8 2.2 3.0 4.0 5.0 5.5 7.0 9.5 14.0 22.0 29.0 Mechanical Configuration A flat top surface mount case with excellent coplanarity of terminals. Physical Parameters Inches A 0.400 ± 0.010 B 0.530 ± 0.010 C 0.125 ± 0.010 D 0.490 ± 0.010 E 0.290 ± 0.010 F 0.030 ± 0.010 LAND PATTERN DIMENSIONS Millimeters 10.16 ± 0.25 13.46 ± 0.25 3.17 ± 0.25 12.44 ± 0.25 7.37 ± 0.25 0.76 ± 0.25 TRANSFORMERS Electrical Configuration 1) Inductance and DCR in table is for either L1 or L2. 2) Leakage Inductance tested at L1 with L2 shorted or at L2 with L1 shorted. 3) Windings balanced within 2% 4) Inductance tested @ 10 kHz Operating Temperature Range –55°C to +105°C Electrical Characteristics Measured at +25°C Rated RMS Current Based upon 40°C temperature rise from 25°C ambient Maximum Power Dissipation at 25°C 0.605 Watts Inductance Tolerance Units are supplied to the tolerance indicated in the tables @ 10KHz Marking Parts are printed with Delevan, Inductance Value, and white dot at terminal #1. Packaging Tape & reel (24mm): 13" reel, 350 pieces max.; 7" reel not available www.delevan.com E-mail: [email protected] 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 PAGE 2/ 2002 126