CYStech Electronics Corp. Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 1/6 PNP Digital Transistors (Built-in Resistors) DTA114YN3 Features • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). • The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. • Only the on/off conditions need to be set for operation, making device design easy. • Complements the DTC114YN3 • Pb-free lead plating and halogen-free package Equivalent Circuit Outline SOT-23 DTA114YN3 R1=10kΩ , R2=47 kΩ IN(B) : Base OUT(C) : Collector GND(E) : Emitter Absolute Maximum Ratings (Ta=25°C) Parameter Supply Voltage Input Voltage Output Current Power Dissipation Thermal Resistance, Junction to Ambient Junction Temperature Storage Temperature DTA114YN3 Symbol VCC VIN IO IO(max) Pd RθJA Tj Tstg Limits -50 -40~+6 -70 -100 200 625 150 -55~+150 Unit V V mA mA mW °C/W °C °C CYStek Product Specification CYStech Electronics Corp. Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 2/6 Electrical Characteristics (Ta=25°C) Parameter Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min. -1.4 68 7 3.7 - Typ. 10 4.7 250 Max. -0.3 -0.3 -0.88 -0.5 13 5.7 - Unit V V V mA μA kΩ MHz Test Conditions VCC=-5V, IO=-100μA VO=-0.3V, IO=-1mA IO/II=-5mA/-0.25mA VI=-5V VCC=-50V, VI=0V VO=-5V, IO=-5mA VCE=-10V, IC=-5mA, f=100MHz * * Transition frequency of the device Ordering Information Device DTA114YN3 DTA114YN3 Package SOT-23 (Pb-free lead plating and halogen-free package) Shipping Marking 3000 pcs / Tape & Reel 6D CYStek Product Specification Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 3/6 CYStech Electronics Corp. Typical Characteristics Current Gain vs Output Current Output Voltage vs Output Current 1000 1 Output Voltage---V O(ON)(V) Current Gain---G I Vo = 5V 100 10 1 Io / Ii = 20 0.1 0.01 0.1 0.1 1 10 Output Current---I O(mA) 1 100 Output Current---Io(mA) Input Voltage vs Output Current(ON characteristics) Output Current vs Input Voltage(OFF characteristics) 10 100 Vcc = 5V Vo = 0.3V Output Current---Io(mA) Input Voltage---V I(ON) (V) 100 10 10 1 0.1 1 0.1 0.01 0.001 0.1 1 10 100 Output Current---Io(mA) 0 0.5 1 1.5 2 2.5 3 Input Voltage---VI(OFF)(V) Power Derating Curve 250 200 150 100 50 0 0 DTA114YN3 50 100 150 200 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 4/6 Reel Dimension Carrier Tape Dimension DTA114YN3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 5/6 Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly Pb-free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 240 +0/-5 °C 217°C 60-150 seconds 260 +0/-5 °C 10-30 seconds 20-40 seconds 6°C/second max. 6 minutes max. 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. DTA114YN3 CYStek Product Specification Spec. No. : C256N3 Issued Date : 2003.11.28 Revised Date : 2011.07.15 Page No. : 6/6 CYStech Electronics Corp. SOT-23 Dimension Marking: A Product Code 6D 3 B S Date Code: Year+Month Year: 3→2003, 4→2004 Month: 1→1, 2→2,‧‧‧ 9→9, A→10, B→11, C→12 2 1 XX L G V 3-Lead SOT-23 Plastic Surface Mounted Package CYStek Package Code: N3 C D K H Style : Pin 1.Base 2.Emitter 3.Collector J *:Typical Inches Min. Max. 0.1102 0.1204 0.0472 0.0630 0.0335 0.0512 0.0118 0.0197 0.0669 0.0910 0.0005 0.0040 DIM A B C D G H Millimeters Min. Max. 2.80 3.04 1.20 1.60 0.89 1.30 0.30 0.50 1.70 2.30 0.013 0.10 DIM J K L S V Inches Min. Max. 0.0034 0.0070 0.0128 0.0266 0.0335 0.0453 0.0830 0.1083 0.0098 0.0256 Millimeters Min. Max. 0.085 0.177 0.32 0.67 0.85 1.15 2.10 2.75 0.25 0.65 Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material : • Lead : Pure tin plated. • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0. Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYSrek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. DTA114YN3 CYStek Product Specification