EC11 Series EC11 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 5.0V supply voltage • 14 pin DIP package • Stability to ±20ppm • Custom lead length, gull wing options available H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 0.250MHz to 106.250MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C 5.0VDC ±10% Supply Voltage (VDD) Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time 250.000kHz to 24.000MHz 45mA Maximum 24.001MHz to 50.000MHz 55mA Maximum 50.001MHz to 66.667MHz 65mA Maximum 66.668MHz to 106.250MHz 85mA Maximum Inclusive of Operating Temperature Range, Supply Voltage, ±100ppm, ±50ppm, ±25ppm, or and Load ±20ppm Max. (0°C to 70°C Only) w/TTL Load 2.4VDC Minimum w/HCMOS Load VDD-0.5VDC Minimum w/TTL Load 0.4VDC Maximum w/HCMOS Load 0.5VDC Maximum 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of 6 nSeconds Maximum Waveform w/HCMOS Load Duty Cycle Load Drive Capability Tri-State Input Voltage at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load 50 ±10(%) (Standard) at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz 50 ±5(%) (Optional) at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz 50 ±5(%) (Optional) 250.000kHz to 24.000MHz 10TTL Load or 50pF HCMOS Load 24.001MHz to 70.000MHz 10TTL Load or 15pF HCMOS Load 70.001MHz to 106.250MHz 10LSTTL Load or 15pF HCMOS Load VIH :No Connection Enables Output VIH :≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE ECLIPTEK CORP. OSCILLATOR EC11 14 pin DIP 800-ECLIPTEK www.ecliptek.com for latest revision VOLTAGE 5.0V CLASS REV.DATE OS04 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC11 00 ET T TS - 60.000M - G AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY TOLERANCE / STABILITY 00=±100ppm Max.(Standard), 45=±50ppm Max. 25=±25ppm Max., 20=±20ppm Max. OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C FREQUENCY K=kHz, M=MHz DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1) TS=Tri-State Enable High NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MARKING SPECIFICATIONS MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Line 1: ECLIPTEK Line 2: EC11 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator Line 3: XX.XXX M M=MHz, K=kHz Frequency (5 Digits Maximum + Decimal) Pin 1: No Connect or Tri-State Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Line 4: XX Y ZZ Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 Characteristic Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 14 pin DIP 5.0V OS04 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC11 Series EC11 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 5.0V supply voltage • 8 pin DIP package • Stability to ±20ppm • Custom lead length, gull wing options available H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 0.250MHz to 106.250MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time 250.000kHz to 24.000MHz 45mA Maximum 24.001MHz to 50.000MHz 55mA Maximum 50.001MHz to 66.667MHz 65mA Maximum 66.668MHz to 106.250MHz 85mA Maximum Inclusive of Operating Temperature Range, Supply Voltage, ±100ppm, ±50ppm, ±25ppm, or and Load ±20ppm Max. (0°C to 70°C Only) w/TTL Load 2.4VDC Minimum w/HCMOS Load VDD-0.5VDC Minimum w/TTL Load 0.4VDC Maximum w/HCMOS Load 0.5VDC Maximum 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of 6 nSeconds Maximum Waveform w/HCMOS Load Duty Cycle Load Drive Capability Tri-State Input Voltage at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load 50 ±10(%) (Standard) at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz 50 ±5(%) (Optional) at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz 50 ±5(%) (Optional) 250.000kHz to 24.000MHz 10TTL Load or 50pF HCMOS Load 24.001MHz to 70.000MHz 10TTL Load or 15pF HCMOS Load 70.001MHz to 106.250MHz 10LSTTL Load or 15pF HCMOS Load VIH :No Connection Enables Output VIH :≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC11 00 HS ET T TS - 60.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Max.(Standard), 45=±50ppm Max. 25=±25ppm Max., 20=±20ppm Max. PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape & Reel (only offered with Half Size G and Half Size G2 Options) PACKAGE HS=Half Size 8 Pin DIP AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Half Size Gull Wing (See Page 132) OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) FREQUENCY K=kHz, M=MHz OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1), TS=Tri-State Enable High MECHANICAL DIMENSIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For “G” Option (2) For “G2” Option Ø Pin 1: No Connect or Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC11 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator 700 Pieces Per Reel Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 3: XX.XXX M M=MHz, K=kHz Characteristic Frequency (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.