Dc MMB1510 Technical specifications of single-phase silicon bridge rectifier Datasheet

MMB1505
THRU
MMB1510
DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 15 Amperes
FEATURES
* Metal case for Maximum Heat Dissipation
* Diffused Junction
* High current capability
MMB-25
* Surge overload ratings - 300 Amperes
* Low forward voltage drop
.500
(12.7)
* High Reliability
TYP.
.310(7.9)
.290(7.4)
MECHANICAL DATA
.480(12.2)
.425(10.8)
* Case: Metal case, electrically isolated
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Plated .25"(6.35mm) Faston lugs, Solderable per
MIL-STD-202E, Method 208 guaranteed
* Polarity: As marked
1.181(30.0)
1.102(28.0)
.673(17.1)
.633(16.1)
* Mounting position: Any
* Weight: 25 grams approx.
HOLE FOR
NO. 8 SCREW
AC
.673(17.1) 1.181(30.0)
.633(16.1) 1.102(28.0)
.732(18.6)
.692(17.6)
AC
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
.582(14.8)
.543(13.8)
Single phase, half wave, 60 Hz, resistive or inductive load.
.033 x .250
(0.8 x 6.4)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
MMB1505 MMB151 MMB152 MMB154 MMB156 MMB158 MMB1510 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Maximum Average Forward Rectified Output Current at Tc = 55oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage Drop per element at 7.5A DC
Maximum DC Reverse Current at Rated
@T A = 25 oC
DC Blocking Voltage per element
@T A = 100 oC
2
15
Amps
I FSM
300
Amps
VF
1.1
Volts
IR
10
500
I t Rating for Fusing (t<8.3ms)
2
I t
374
Typical Junction Capacitance (Note1)
CJ
40
Typical Thermal Resistance (Note 2)
R θJ A
19
T J, T STG
-55 to +150
Operating and Storage Temperature Range
Volts
IO
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to Ambient and from Junction to Lead mounted on P.C.B. with 0.47 x 0.47" (12 x 12mm) copper pads.
µAmps
A 2 Sec
pF
0
C/W
0
C
RATING AND CHARACTERISTIC CURVES (MMB1505 THRU MMB1510)
500
400
8.3ms Single Half Sine-Wave
(JEDEC Mathod)
300
200
100
0
1
2
5
10
20
50
100
FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD OUTPUT CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
25
20
15
10
Single Phase Half Wave
60Hz Inductive or
Resistive Load
5
0
50
TJ=25oC
10
Pulse Width=300ms
1% Duty Cycle
1
.6
.7
.8
.9
1.0
1.1
1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
1.3
10
1.0
.1
TJ=25oC
.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
DC COMPONENTS CO., LTD.
R
150
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (µA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
.1
100
CASE TEMPERATURE, (oC)
NUMBER OF CYCLES AT 60Hz
Similar pages