NT145C/NT155C SERIES NAUTILUX - LED Ceiling mount TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION NT145C 1234- HID max. Cast aluminum enclosed driver housing. Cast aluminum lens ring. Silicone gasket with memory retention. Heat dissipating fins with removable LED platform. 5- Borosilicate frosted glass diffuser with internal concentric prismatic pattern. 70W All stainless steel hardware. NT155C NT145C NT155C 5 4 3 2 1 MATERIALS Nautilux is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED platform is easily removable and secured with a heat dissipating plate for optimal light performance. LED light engine is installed in down lighting position to provide a general diffused light over the glass diffuser. ELECTRICAL LED MOUNTING Maximum weight: 10lbs (4.5kg) Nautilux is designed as a ceiling mount luminaire. Mounts over a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C mounting holes. CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometry tested per IES LM-79-08 / IES LM80 test report. Rated IP65. DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 9.85” (250) NT145C 6.5” (165) NT155C 6” (152) LIFE 51,000hrs L77B50 (based on IESNA TM-21 Test Method and LM-80 data). 68,000hrs L70B50 (calculated projection from LM-80 data). FINISH NT145C Frosted diffuser with cast aluminum cross cage NT155C Frosted diffuser Rev 0 LED multi-volt compatibility (50-60Hz), minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). Standard 4000K LED platform included. Optional 3000K and 3500K available. Removable modular LED platform. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Jan 2018 Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. LUMINIS.COM 1 NT145C/NT155C SERIES NAUTILUX - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information NT145C-L1W30r1 Total Lms: 2748 Lumens Total Input Watts: 33.26 W Source: LED Efficacy: 82.62 Lumens/Watt BUG: B1-U3-G1 CCT/CRI: 4000K/80 Maximum Candela: 844 @ 2.5 deg V 844 633 422 211 Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION MODEL# LED LIGHT SELECTION SUFFIX L1W12 L1W18 L1W30 NT145C VOLTAGE INPUT WATTS DELIVERED LUMENS 13W 23W 33W 1131 1935 2748 1 FINISH STANDARD COLORS CRI CCT K 80 4000K 120V 277V WHT BKT BZT MST GRT DGT CHT Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne OPTIONAL COLORS CS Custom color RAL RAL# color NT155C (Refer to color chart) OPTIONS ACCESSORIES ELECTRICAL FS PH Fuse2 Photocell2 SWK Surface mount connection box (Single luminaire connection. 1” extension) Alternate CCT K LED K3 3000K CCT LED K35 3500K CCT LED Jan 2018 Rev 0 NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other mounting types). LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 2