High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 • Operating & Storage Temperature -40°C to +155°C • Temperature Rise, Maximum 50°C • Operating Frequency Up to 3MHz Specifications @ 25°C Part Number Inductance(1) μH±20% Heating Current(2) (Adc) Isat(3) (Adc) HM72E-06R10LF HM72E-06R20LF HM72E-06R33LF HM72E-06R47LF HM72E-06R68LF HM72E-061R0LF HM72E-061R5LF HM72E-062R2LF HM72E-063R3LF HM72E-064R7LF HM72E-06330LF 0.10 0.20 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 33.0 26.2 20.3 18.0 16.1 14.4 10.3 8.4 8.3 6.6 5.4 1.8 45.0 34.0 22.0 19.0 16.5 15.0 10.0 8.5 8.0 6.5 2.5 Notes: (1) (2) (3) (4) DCR (mΩ) Typ. 1.5 2.5 3.2 4.0 5.0 9.0 13.0 18.0 26.5 39.0 302.0 Max. 1.7 2.8 3.9 4.2 5.5 10.0 14.0 20.0 30.0 42.0 332.0 Inductance is measured at 100 kHz, 0.1Vac without DC current. The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. The part temperature (ambient + temperature rise) should not exceed 130°C. Electrical Characteristics @ 25°C Top View Side View Bottom View Recommended PCB layout General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 05.13 High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 Electrical Characteristic @ 20°C (Cont’d) L Vs I INDUCTANCE (uH) 4.800 4.600 4.400 4.200 4.000 3.800 3.600 3.400 3.200 3.000 2.800 2.600 2.400 2.200 2.000 1.800 1.600 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0.000 06R10 06R20 06R33 06R47 06R68 061R0 061R5 062R2 063R3 064R7 0 2 3 4 5 6 8 9 10 12 14 15 16 18 20 21 22 24 25 26 27 28 30 33 35 36 40 45 50 55 60 65 DC CURRENT (A) Packing / Ordering Information One reel (13”) 2000 pcs One shipping carton (6 reels) 12000 pcs HM72E - 06 R33 LF TR13 Model Series Case Size: 13” tape & reel packing Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10μH, “R” denotes the decimal point. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 05.13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: BI Technologies: HM72E-062R2LFTR13 HM72E-06R10LFTR13 HM72E-06330LFTR13 HM72E-063R3LFTR13 HM72E064R7LFTR13 HM72E-06R47LFTR13 HM72E-06R20LFTR13 HM72E-06R68LFTR13 HM72E-061R5LFTR13 HM72E-061R0LFTR13 HM72E-06R33LFTR13