ECU-P1706 ECU-P1702 ECU-P1300 250 KS/s, 16bit, Simultaneous 8-ch Analog input PCI-104 10 MS/s, 12bit, Simultaneous 4-ch Analog input PCI-104 Vibration Signal Modulate Card Features NEW Designed for Smart-Grid Applications ECU-P1706 focuses on the Vibration/ Substation Signal Analytics (Wind-Power / Smart Substations) ECU-P1702 focuses on the Partial Discharge Detection and Analytical Devices (Smart Substations) ECU-P1300 focuses on Vibration Applications (Wind-power / Smart Substations) Easy to install to ECU-1871 Energy Controller ECU-P1706 ECU-P1702 Specifications ECU-P1300 Specifications Specifications General General General Power Consumption 5V @ 700mA (Max.) 3.3V @ 850mA (Max.) Bus Type PCI-104 I/O Connector BNC Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Power Consumption Typical: 5V @ 700mA; 12V @ 100mA Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Power Consumption Typical: 5V @ 850mA Bus Type PCI-104 I/O Connector Plug-in Terminal Block Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Analog Input Channels Resolution Max. Sampling Rate FIFO Size Overvoltage Protection Input Impedance Sampling Mode 8 differential 16 bits 250 KS/s 8K samples ±30V Trigger mode 18MΩ Software, onboard programmable pacer and external (TTL Level) Delay To Start Trigger, Delay To Stop Trigger Analog Trigger, External Trigger (V. Software Programmable) Trigger Source Input Range Bipolar Accuracy % of FSR±1LSB Analog Input ±10V ±5V ±2.5V ±1.25V 0.04 0.04 0.06 0.08 Channels Resolution Max. Sampling Rate FIFO Size Overvoltage Protection Input Impedance Sampling Mode Trigger mode Trigger Source Timer Counter Channels Resolution Mode 2 32 bits In: Event counting, Frequency In, PWM In Compatibility Isolated 24VDC Max. Input Frequency 1 MHz Max. Output Frequency 1 MHz Ordering Information ECU-P1706-AE Input Range 4 Single-ended 12 bits 10 MS/s 32K samples ±15V 50 ohm/1M ohm/Hi Z switch selectable Software, onboard programmable pacer and external (TTL Level) Delay To Start Trigger, Delay To Stop Trigger Analog Trigger, External Trigger ±5V, ±2.5V, ±1V, ±0.5V Vibration Modulate Channels Input Range Output Range Input Coupling Sensor Current Supply Precision Drive Ability Sensor Signal Gain Signal Gain Analog Filter Filter Adjustable 8 ±5V (Max.) ±10V AC 4mA ±1%, 24V compliant 0.1% 0 ~ 5K 1 1 8th order Lowpass Bessel Filters 0.1 Hz ~ 25KHz Adjustable by Software Program Ordering Information ECU-P1300-AE Vibration Signal Modulate Card Ordering Information ECU-P1702-LAE 10 MS/s, 12bit, Simultaneous 4-ch PCI-104 250 KS/s, 16bit, Simultaneous 8-ch PCI-104 Online Download www.advantech.com/products All product specifications are subject to change without notice Last updated : 5-May-2015