WTE FR3B 3.0a surface mount glass passivated fast recovery diode Datasheet

FR3A – FR3K
WTE
POWER SEMICONDUCTORS
Pb
3.0A SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY DIODE
Features
!
Glass Passivated Die Construction
!
!
!
!
!
!
Ideally Suited for Automatic Assembly
B
Low Forward Voltage Drop, High Efficiency
Surge Overload Rating to 100A Peak
Low Power Loss
A
Fast Recovery Time
F
Plastic Case Material has UL Flammability
Classification Rating 94V-O
C
H
G
E
SMC/DO-214AB
Dim
Min
Max
5.59
6.22
A
6.60
7.11
B
2.75
3.25
C
0.152
0.305
D
7.75
8.13
E
2.00
2.62
F
0.051
0.203
G
0.76
1.27
H
All Dimensions in mm
Mechanical Data
!
!
!
!
!
!
Case: SMC/DO-214AB, Molded Plastic
Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
Polarity: Cathode Band or Cathode Notch
Marking: Type Number
Weight: 0.21 grams (approx.)
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
Maximum Ratings and Electrical Characteristics
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
@TA=25°C unless otherwise specified
Symbol
FR3A
FR3B
FR3D
FR3G
FR3J
FR3K
Unit
VRRM
VRWM
VR
50
100
200
400
600
800
V
VR(RMS)
35
70
140
280
420
560
V
IO
3.0
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
100
A
Forward Voltage
@IF = 3.0A
VFM
1.30
V
@TA = 25°C
@TA = 125°C
IRM
10
350
µA
Peak Reverse Current
At Rated DC Blocking Voltage
@TL = 75°C
D
Reverse Recovery Time (Note 1)
trr
Typical Junction Capacitance (Note 2)
Cj
60
pF
RJL
15
°C/W
Tj, TSTG
-50 to +150
°C
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
150
250
500
nS
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
3. Mounted on P.C. Board with 8.0mm2 land area.
FR3A – FR3K
1 of 4
© 2006 Won-Top Electronics
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD CURRENT (A)
3.0
2.5
2.0
1.5
1.0
0.5
0
10
1.0
0.1
Tj = 25°C
IF Pulse Width: 300 µs
0.01
25
50
75
100
125
150
175
0
IR, INSTANTANEOUS REVERSE CURRENT (µA)
IFSM, PEAK FORWARD SURGE CURRENT (A)
Single Half-Sine-Wave
(JEDEC Method)
100
80
60
40
20
0
10
0.8
1.2
1.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
TL , LEAD TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
1
0.4
1000
Tj = 125°C
100
10
Tj = 25°C
1.0
0.1
100
0
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Forward Surge Current Derating Curve
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
trr
+0.5A
50Ω NI (Non-inductive)
10Ω NI
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
1.0Ω
NI
Oscilloscope
(Note 1)
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A
Set time base for 10ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
FR3A – FR3K
2 of 4
© 2006 Won-Top Electronics
MARKING INFORMATION
RECOMMENDED FOOTPRINT
0.060 MIN
(1.52 MIN)
WTE
FR3x
Cathode
WTE
FR3x
x
0.121 MIN
(3.07 MIN)
= Polarity Band
= Manufacturer’s Logo
= Device Number
= A, B, D, G, J or K
0.185 MAX
(4.69 MAX)
inches(mm)
PACKAGING INFORMATION
TAPE & REEL
Direction of Unreeling
8mm
330mm
16mm
1.6mm
4mm
16mm
Product ID Label
Reel Diameter
(mm)
Quantity
(PCS)
Inner Box Size
L x W x H (mm)
Quantity
(PCS)
Carton Size
L x W x H (mm)
Quantity
(PCS)
Approx. Gross Weight
(KG)
330
3,000
340 x 337 x 45
6,000
370 x 370 x 420
48,000
19.0
Note: 1. Paper reel, white or gray color.
2. Components are packed in accordance with EIA standard 481-1 and 481-2.
FR3A – FR3K
3 of 4
© 2006 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
FR3A-T3
SMC
3000/Tape & Reel
FR3B-T3
SMC
3000/Tape & Reel
FR3D-T3
SMC
3000/Tape & Reel
FR3G-T3
SMC
3000/Tape & Reel
FR3J-T3
SMC
3000/Tape & Reel
FR3K-T3
SMC
3000/Tape & Reel
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to part number above. For example, FR3A-T3-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
We power your everyday.
FR3A – FR3K
4 of 4
© 2006 Won-Top Electronics
Similar pages