Aluminum Electrolytic Capacitors (SMD Type) Low impedance Surface Mount Type Series : FC Type : V High temperature Lead-Free reflow (suffix : A✽) FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 35 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 1k 0.90 100 k to 1.00 22 j FC Capacitance (µF) L Series identification K A±0.2 (P) + (I) Negative polarity marking (–) – H 0D±0.5 0.3 max. W Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) (I) Dimensions Example : 6.3 V.DC 22 µF Marking color : BLACK ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage (V.DC) Code 10 k 0.95 B±0.2 Marking 120 0.75 6.3 10 16 25 35 j A C E V Size L A, B H code 0D +0.1 4.3 5.5 max. B 4.0 5.4 -0.2 5.3 6.5 max. C 5.0 5.4 +0.1 -0.2 6.6 7.8 max. D 6.3 5.4 +0.1 -0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 0D L Size code 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G Specification Ripple Impedance tan d current (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 60 3.00 0.26 95 1.80 0.26 140 1.00 0.26 140 1.00 0.26 230 0.40 0.26 450 0.30 0.26 670 0.15 0.26 670 0.15 0.26 95 1.80 0.19 230 0.40 0.19 230 0.40 0.19 450 0.30 0.19 670 0.15 0.19 670 0.15 0.19 60 3.00 0.16 95 1.80 0.16 140 1.00 0.16 230 0.40 0.16 230 0.40 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 60 3.00 0.14 140 1.00 0.14 140 1.00 0.14 230 0.40 0.14 450 0.30 0.14 450 0.30 0.14 670 0.15 0.14 670 0.15 0.14 670 0.15 0.14 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 95 1.80 0.12 95 1.80 0.12 140 1.00 0.12 230 0.40 0.12 230 0.40 0.12 670 0.15 0.12 670 0.15 0.12 670 0.15 0.12 Min. Packaging Q'ty Part No. Reflow EEEFC0J220AR EEEFC0J470AR EEEFC0J680AP EEEFC0J101AP EEEFC0J221AP EEEFC0J331AP EEEFC0J102AP EEEFC0J152AP EEEFC1A330AR EEEFC1A101AP EEEFC1A151AP EEEFC1A221AP EEEFC1A471AP EEEFC1A102AP EEEFC1C100AR EEEFC1C220AR EEEFC1C470AP EEEFC1C680AP EEEFC1C101AP EEEFC1C221AP EEEFC1C331AP EEEFC1C471AP EEEFC1C681AP EEEFC1E6R8AR EEEFC1E220AP EEEFC1E330AP EEEFC1E470AP EEEFC1E680AP EEEFC1E101AP EEEFC1E221AP EEEFC1E331AP EEEFC1E471AP EEEFC1V1R0AR EEEFC1V2R2AR EEEFC1V3R3AR EEEFC1V4R7AR EEEFC1V6R8AR EEEFC1V100AR EEEFC1V220AP EEEFC1V330AP EEEFC1V470AP EEEFC1V101AP EEEFC1V221AP EEEFC1V331AP (5) (5) (5) (5) (6) (6) (6) (6) (5) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) Taping (pcs) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016