Aluminum electrolytic capacitors Axial-lead and soldering star capacitors Series/Type: B41689, B41789 Date: December 2014 © EPCOS AG 2014. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Axial-lead and soldering star capacitors B41689, B41789 Very high ripple current up to 150 °C Applications Automotive electronics Features High vibration stability, special design with high vibration stability up to 45 g available upon request Very high ripple current capability Long useful life, 2000 h at up to 150 °C Low ESR also at 63 V DC Storage for up to 15 years at a temperature of up to 35 °C. If the capacitor is stored for longer than two years, the operating voltage must be applied for one hour to ensure the specified leakage current. RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case with insulating sleeve Negative pole connected to case Terminals Axial leads, welded to ensure perfect electrical contact Soldering star for upright mounting on PCB available Alternative axial-lead design with double-sided plates for horizontal mounting available upon request Taping and packing Axial-lead capacitors will be delivered in pallet package Capacitors with d × l ≤ 16 × 30 mm are also available taped on reel Soldering star capacitors are packed in cardboard Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B41689, B41789 Very high ripple current up to 150 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 25 ... 63 V DC 1.15 VR for ≤ 40 V DC 1.10 VR for 63 V DC 270 ... 4500 µF 10/+30% Q Leakage current Ileak (5 min, 20 °C) Self-inductance ESL1) Diameter d (mm) 16 Terminals axial Approx. ESL (nH) 26 30 38 29 34 31 33 38 45 50 7 8 8 10 9 9 11 13 14 soldering star Useful life2) 150 °C; VR; 0.5 IAC,R 125 °C; VR; IAC,R 125 °C; VR; IAC,max 40 °C; VR; 2.1 IAC,R > 2000 h > 10000 h > 4000 h > 500000 h Voltage endurance test 125 °C; VR 4000 h Length l (mm) 25 29 30 35 39 49 25 30 35 39 49 18 20/21 Requirements: ∆C/C ≤ 30% of initial value ESR ≤ 3 times initial specified limit3) Ileak ≤ initial specified limit Post test requirements: ∆C/C ≤ 10% of initial value ESR ≤ 1.3 times initial specified limit3) Ileak ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm, acceleration max. 20 g, duration 3 × 2 h. Capacitor mounted by its wire leads at a distance of (6 ±1) mm from the case and additionally clamped by the case. IEC climatic category To IEC 60068-1: 55/125/56 (55 °C/+125 °C/56 days damp heat test) Detail specification Sectional specification Similar to CECC 30301-802 IEC 60384-4 1) If optimum circuit design is used, the values are lower by 30%. 2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. 3) ESRmax at 100 Hz, 20 °C Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B41689, B41789 Very high ripple current up to 150 °C B41689, Axial-lead capacitors Dimensional drawing Dimensions, weights and packing units d×l mm 16 × 25 16 × 30 16 × 35 16 × 39 18 × 25 18 × 30 18 × 39 20 × 29 21 × 39 21 × 49 dmax × Imax mm 16.5 × 25.5 16.5 × 30.5 16.5 × 35.5 16.5 × 40 18.5 × 25.5 18.5 × 30.5 18.5 × 40 20.5 × 29.5 21.5 × 40 21.5 × 50 Please read Cautions and warnings and Important notes at the end of this document. Approx. weight g 7.4 8.9 10.4 11.7 9.3 11.1 14.7 13.5 20.0 25.0 Page 4 of 19 Packing units (pcs.) Pallet Reel 180 250 180 250 180 180 160 160 160 140 140 110 B41689, B41789 Very high ripple current up to 150 °C B41789, Soldering star capacitors Dimensional drawings Mounting holes d = 16 mm ... 21 mm Dimensions, weights and packing units d×l mm 16 × 25 16 × 30 16 × 35 16 × 39 18 × 25 18 × 30 18 × 39 21 × 39 21 × 49 dmax × Imax mm 17.5 × 27 17.5 × 32 17.5 × 37 17.5 × 41.5 19.5 × 27 19.5 × 32 19.5 × 41.5 22.5 × 41.5 22.5 × 51.5 Please read Cautions and warnings and Important notes at the end of this document. c ±0.1 mm 16.5 16.5 16.5 16.5 18.5 18.5 18.5 21.5 21.5 e ±0.1 mm 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.5 3.5 Page 5 of 19 Approx. weight g 7.9 9.4 10.9 12.2 9.9 11.8 15.4 21.0 26.0 Packing units pcs. 300 300 200 200 300 300 200 324 264 B41689, B41789 Very high ripple current up to 150 °C Overview of available types VR (V DC) 25 40 63 Case dimensions d × l (mm) CR (µF) 270 16 × 25 330 16 × 30 390 18 × 25 16 × 35 470 16 × 25 560 20 × 29 600 680 18 × 25 720 16 × 30 820 16 × 35 900 18 × 30 1000 16 × 25 16 × 39 1200 18 × 25 20 × 29 1300 16 × 30 1500 16 × 35 1700 18 × 30 1800 16 × 39 1900 20 × 29 21 × 39 2000 18 × 39 21 × 49 2700 3300 21 × 39 4500 21 × 49 Please read Cautions and warnings and Important notes at the end of this document. 18 × 39 21 × 39 21 × 49 18 × 39 1400 2200 18 × 30 16 × 39 590 Page 6 of 19 B41689, B41789 Very high ripple current up to 150 °C Case dimensions and ordering codes VR V DC 25 40 CR 120 Hz 20 °C µF 1000 1000 ∇ 1200 1200 ∇ 1300 1300 ∇ 1500 1500 ∇ 1700 1700 ∇ 1800 1800 ∇ 1900 1900 ∇ 2200 2200 ∇ 3300 3300 ∇ 4500 4500 ∇ 560 560 ∇ 680 680 ∇ 720 720 ∇ 820 820 ∇ 900 900 ∇ 1000 1000 ∇ Case dimensions d×l mm 16 × 25 16 × 25 18 × 25 18 × 25 16 × 30 16 × 30 16 × 35 16 × 35 18 × 30 18 × 30 16 × 39 16 × 39 20 × 29 20 × 29 18 × 39 18 × 39 21 × 39 21 × 39 21 × 49 21 × 49 16 × 25 16 × 25 18 × 25 18 × 25 16 × 30 16 × 30 16 × 35 16 × 35 18 × 30 18 × 30 16 × 39 16 × 39 Ordering code Axial pallet Ordering code Axial reel B41689A5108Q001 B41689K5108Q001 B41689A5128Q001 B41689K5128Q001 B41689A5138Q001 B41689K5138Q001 B41689A5158Q001 B41689K5158Q001 B41689A5178Q001 B41689K5178Q001 B41689A5188Q001 B41689K5188Q001 B41689A5198Q001 B41689K5198Q001 B41689A5228Q001 B41689K5228Q001 B41689A5338Q001 B41689K5338Q001 B41689A5458Q001 B41689K5458Q001 B41689A7567Q001 B41689K7567Q001 B41689A7687Q001 B41689K7687Q001 B41689A7727Q001 B41689K7727Q001 B41689A7827Q001 B41689K7827Q001 B41689A7907Q001 B41689K7907Q001 B41689A7108Q001 B41689K7108Q001 B41689A5108Q003 B41789A5108Q001 B41689K5108Q003 B41789K5108Q001 B41789A5128Q001 B41789K5128Q001 B41689A5138Q003 B41789A5138Q001 B41689K5138Q003 B41789K5138Q001 B41789A5158Q001 B41789K5158Q001 B41789A5178Q001 B41789K5178Q001 B41789A5188Q001 B41789K5188Q001 B41689A7567Q003 B41689K7567Q003 B41689A7727Q003 B41689K7727Q003 ∇ Increased ripple current due to optimized thermal design Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 19 Ordering code Soldering star B41789A5228Q001 B41789K5228Q001 B41789A5338Q001 B41789K5338Q001 B41789A5458Q001 B41789K5458Q001 B41789A7567Q001 B41789K7567Q001 B41789A7687Q001 B41789K7687Q001 B41789A7727Q001 B41789K7727Q001 B41789A7827Q001 B41789K7827Q001 B41789A7907Q001 B41789K7907Q001 B41789A7108Q001 B41789K7108Q001 B41689, B41789 Very high ripple current up to 150 °C Case dimensions and ordering codes VR V DC 40 63 CR 120 Hz 20 °C µF 1200 1200 ∇ 1400 1400 ∇ 2000 2000 ∇ 2700 2700 ∇ 270 270 ∇ 330 330 ∇ 390 390 ∇ 470 470 ∇ 560 560 ∇ 590 590 ∇ 600 600 ∇ 820 820 ∇ 1000 1000 ∇ 1300 1300 ∇ Case dimensions d×l mm 20 × 29 20 × 29 18 × 39 18 × 39 21 × 39 21 × 39 21 × 49 21 × 49 16 × 25 16 × 25 16 × 30 16 × 30 18 × 25 18 × 25 16 × 35 16 × 35 18 × 30 18 × 30 16 × 39 16 × 39 20 × 29 20 × 29 18 × 39 18 × 39 21 × 39 21 × 39 21 × 49 21 × 49 Ordering code Axial pallet B41689A7128Q001 B41689K7128Q001 B41689A7148Q001 B41689K7148Q001 B41689A7208Q001 B41689K7208Q001 B41689A7278Q001 B41689K7278Q001 B41689A8277Q001 B41689K8277Q001 B41689A8337Q001 B41689K8337Q001 B41689A8397Q001 B41689K8397Q001 B41689A8477Q001 B41689K8477Q001 B41689A8567Q001 B41689K8567Q001 B41689A8597Q001 B41689K8597Q001 B41689A8607Q001 B41689K8607Q001 B41689A8827Q001 B41689K8827Q001 B41689A8108Q001 B41689K8108Q001 B41689A8138Q001 B41689K8138Q001 Ordering code Axial reel B41689A8277Q003 B41689K8277Q003 B41689A8337Q003 B41689K8337Q003 ∇ Increased ripple current due to optimized thermal design Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 Ordering code Soldering star B41789A7148Q001 B41789K7148Q001 B41789A7208Q001 B41789K7208Q001 B41789A7278Q001 B41789K7278Q001 B41789A8277Q001 B41789K8277Q001 B41789A8337Q001 B41789K8337Q001 B41789A8397Q001 B41789K8397Q001 B41789A8477Q001 B41789K8477Q001 B41789A8567Q001 B41789K8567Q001 B41789A8597Q001 B41789K8597Q001 B41789A8827Q001 B41789K8827Q001 B41789A8108Q001 B41789K8108Q001 B41789A8138Q001 B41789K8138Q001 B41689, B41789 Very high ripple current up to 150 °C Technical data CR 120 Hz 20 °C µF Case dimensions d×l mm VR = 25 V DC 1000 16 × 25 1000 ∇ 16 × 25 1200 18 × 25 1200 ∇ 18 × 25 1300 16 × 30 1300 ∇ 16 × 30 1500 16 × 35 1500 ∇ 16 × 35 1700 18 × 30 1700 ∇ 18 × 30 1800 16 × 39 1800 ∇ 16 × 39 1900 20 × 29 1900 ∇ 20 × 29 2200 18 × 39 2200 ∇ 18 × 39 3300 21 × 39 3300 ∇ 21 × 39 4500 21 × 49 4500 ∇ 21 × 49 VR = 40 V DC 560 16 × 25 560 ∇ 16 × 25 680 18 × 25 680 ∇ 18 × 25 720 16 × 30 720 ∇ 16 × 30 820 16 × 35 820 ∇ 16 × 35 900 18 × 30 900 ∇ 18 × 30 1000 16 × 39 1000 ∇ 16 × 39 ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max1) 10 kHz TC 125 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 150 °C A 98 98 80 80 75 75 65 65 57 57 55 55 52 52 44 44 31 31 23 23 565 565 470 470 435 435 377 377 332 332 314 314 297 297 257 257 172 172 126 126 53 53 43 43 41 41 35 35 31 31 30 30 28 28 24 24 17 17 13 13 50 50 41 41 39 39 34 34 29 29 28 28 27 27 23 23 16 16 12 12 9.2 10.1 11.1 12.2 11.4 12.5 13.3 14.6 14.1 15.5 15.1 16.6 14.5 16.0 18.3 20.1 21.0 23.2 26.5 29.2 5.7 6.0 6.9 7.2 7.1 7.4 8.3 8.6 8.8 9.1 9.4 9.8 9.1 9.5 11.4 11.8 13.1 13.6 16.5 17.2 3.5 3.6 4.2 4.4 4.3 4.5 5.0 5.2 5.3 5.5 5.7 5.9 5.5 5.7 6.9 7.2 7.9 8.3 10.0 10.4 1.7 1.8 2.1 2.2 2.2 2.2 2.5 2.6 2.7 2.8 2.9 3.0 2.7 2.9 3.4 3.6 4.0 4.1 5.0 5.2 129 129 105 105 100 100 88 88 80 80 73 73 587 587 483 483 457 457 401 401 365 365 329 329 53 53 43 43 42 42 36 36 33 33 30 30 50 50 41 41 39 39 34 34 31 31 29 29 9.2 10.1 11.1 12.3 11.4 12.5 13.2 14.5 13.9 15.2 15.1 16.6 5.7 6.0 6.9 7.2 7.1 7.4 8.2 8.6 8.6 9.0 9.4 9.8 3.5 3.6 4.2 4.4 4.3 4.5 5.0 5.2 5.2 5.4 5.7 5.9 1.7 1.8 2.1 2.2 2.1 2.2 2.5 2.6 2.6 2.7 2.8 3.0 ESRmax 100 Hz 20 °C mΩ ∇ Increased ripple current due to optimized thermal design 1) Maximum ripple current at 125 °C capacitor case temperature TC (measured at aluminum case surface), when mounted to a heat sink. Further details available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 19 B41689, B41789 Very high ripple current up to 150 °C Technical data CR 120 Hz 20 °C µF Case dimensions d×l mm VR = 40 V DC 1200 20 × 29 1200 ∇ 20 × 29 1400 18 × 39 1400 ∇ 18 × 39 2000 21 × 39 2000 ∇ 21 × 39 2700 21 × 49 2700 ∇ 21 × 49 VR = 63 V DC 270 16 × 25 270 ∇ 16 × 25 330 16 × 30 330 ∇ 16 × 30 390 18 × 25 390 ∇ 18 × 25 470 16 × 35 470 ∇ 16 × 35 560 18 × 30 560 ∇ 18 × 30 590 16 × 39 590 ∇ 16 × 39 600 20 × 29 600 ∇ 20 × 29 820 18 × 39 820 ∇ 18 × 39 1000 21 × 39 1000 ∇ 21 × 39 1300 21 × 49 1300 ∇ 21 × 49 ESRmax 100 Hz 40 °C mΩ ESRmax 10 kHz 20 °C mΩ Zmax 100 kHz 20 °C mΩ IAC,max2) 10 kHz TC 125 °C A IAC,max 10 kHz 125 °C A IAC,R 10 kHz 125 °C A IAC,max 10 kHz 150 °C A 61 61 52 52 38 38 28 28 274 274 235 235 165 165 123 123 26 26 22 22 16 16 12 12 24 24 20 20 16 16 12 12 14.9 16.5 18.9 20.8 21.3 23.4 26.8 29.5 9.3 9.7 11.8 12.2 13.2 13.8 16.7 17.4 5.6 5.9 7.1 7.4 8.0 8.4 10.1 10.5 2.8 2.9 3.6 3.7 4.0 4.2 5.0 5.3 218 218 178 178 160 160 131 131 113 113 105 105 99 99 78 78 61 61 47 47 777 777 636 636 602 602 498 498 420 420 397 397 350 350 287 287 211 211 162 162 66 66 54 54 54 54 43 43 39 39 35 35 31 31 27 27 19 19 15 15 63 63 51 51 51 51 41 41 37 37 33 33 29 29 26 26 18 18 14 14 8.4 9.2 10.3 11.2 9.5 10.4 12.3 13.4 12.0 13.1 14.2 15.5 13.9 15.2 16.1 17.6 20.0 21.8 25.1 27.4 5.2 5.4 6.4 6.6 5.9 6.1 7.7 7.9 7.5 7.7 8.8 9.1 8.7 9.0 10.0 10.4 12.4 12.9 15.6 16.2 3.2 3.3 3.9 4.0 3.6 3.7 4.6 4.8 4.5 4.7 5.3 5.5 5.3 5.4 6.1 6.3 7.5 7.8 9.5 9.8 1.6 1.6 1.9 2.0 1.8 1.9 2.3 2.4 2.3 2.3 2.7 2.8 2.6 2.7 3.0 3.1 3.8 3.9 4.7 4.9 ESRmax 100 Hz 20 °C mΩ ∇ Increased ripple current due to optimized thermal design 2) Maximum ripple current at 125 °C capacitor case temperature TC (measured at aluminum case surface), when mounted to a heat sink. Further details available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 19 B41689, B41789 Very high ripple current up to 150 °C Useful life1) depending on ambient temperature TA under ripple current operating conditions at VR 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 19 B41689, B41789 Very high ripple current up to 150 °C Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior Equivalent series resistance ESR versus frequency f Typical behavior for 1000 µF/63 V Impedance Z versus frequency f Typical behavior for 1000 µF/63 V Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 19 B41689, B41789 Very high ripple current up to 150 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 19 B41689, B41789 Very high ripple current up to 150 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 19 B41689, B41789 Very high ripple current up to 150 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 19 B41689, B41789 Very high ripple current up to 150 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ∆T TA TC TB t ∆t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 16 of 19 B41689, B41789 Very high ripple current up to 150 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 π f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2 π f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 19 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). Page 18 of 19 Important notes 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.vvv Page 19 of 19