Ecliptek EP15 Oscillator Datasheet

EP15 Series
EP15
• EPO™ Programmable Oscillator
• 3.3V supply voltage
• HCMOS/TTL output
• Plastic surface mount package
• Stability to 50ppm
• Available on tape and reel
H 4.7
L 14.0
W 9.8
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.000MHz to 106.250MHz
Operating Temperature Range
-20°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
3.3VDC ±0.3VDC
Input Current
28mA Maximum (Unloaded)
Disable Current (TS Option)
16mA Maximum (Pin 1=Ground)
Standby Current (PD Option)
20µA Maximum (Pin 1=Ground)
Frequency Tolerance / Stability
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm or ±50ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH)
VDD-0.4VDC Minimum IOH=-8mA
Output Voltage Logic Low (VOL)
0.4VDC Maximum
IOL=+8mA
Rise Time / Fall Time
20% to 80% of waveform
4 nSeconds Maximum
Duty Cycle
at 50% of waveform
50 ±10(%) (Standard)
at 50% of waveform (<50.000MHz Only)
50 ±5(%) (Optional)
<50.000MHz
30pF HCMOS Load Maximum
>50.000MHz
15pF HCMOS Load Maximum
TS
Tri-State
PD
Power Down
VIH: No Connection or ≥70% of VDD
Enables Output
VIL: (TS Option) <20% of VDD
Disable Output: High Impedance
VIL: (PD Option) <20% of VDD
Disable Output: Logic Low
Load Drive Capability
Output Control Function
Output Control Function Input Voltage
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Period Jitter: Absolute
Period Jitter: One Sigma
<33.000MHz
±250pSec Maximum, ±100pSec Typical
>33.000MHz
±125pSec Maximum, ±75pSec Typical
<33.000MHz
±50pSec Maximum
>33.000MHz
±40pSec Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EP15
PLASTIC
3.3V
OS49
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
02/04
Specifications subject to change without notice.
PART NUMBERING GUIDE
EP15 00 SJ ET T TS - 24.000M TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum
PACKAGING OPTIONS
Blank=Bulk
TR=Tape and Reel (Standard)
OPERATING TEMP. RANGE
Blank=-20°C to 70°C
ET=-40°C to 85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State
PD=Power Down
DUTY CYCLE
Blank=50 ±10(%) (Standard)
T=50 ±5(%)
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State or Power Down
Pin 2: Case Ground
Pin 3: Output
Pin 4: Supply Voltage
Tolerances = ±0.1
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
A
B
C
D
E
24 ±.3
11.5 ±.1
10.75 ±.1
4 ±.2
2±.1
TAPE
F
12 ±.2
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1000
REEL
G
H
J
K
L
R
S
T
U
V
B0*
1.5 +.1-0
A0*
.3 ±.1
K0*
2.5 MIN
10 MIN
30.4 MAX
360 MAX
24.4+2-0
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
Line 1: ECLIPTEK
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: P XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Configuration Designator
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EP15
PLASTIC
3.3V
OS49
02/04
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages