IPSL series Low Range Industrial Pressure Sensor Piezo-resistive sensor Stainless steel body & diaphragm Accuracy <±0.25% FS BFSL Various outputs including Volts and mA. Pressure ranges from 50 mbar to 1000 mbar Gauge or Absolute pressure reference Options available on the IPSL pressure transmitter. Pressure range Pressure reference (G or Abs) Output type The IPSL is suitable for use in a wide range of applications. The probe uses a piezoresistive silicon sensor, giving excellent media compatibility within an oil filled 316L stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially in high vibration/shock applications. Suitable applications HVAC Pneumatics Rainwater harvesting Agricultural machinery Laboratory testing Mechanical engineering Environmental engineering Automotive testing Tank gauging IBC, IBC Tote or pallet tank Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Performance Accuracy (Non-Linearity & Hysteresis)<±0.25% / FS (BFSL) for gauge, <±0.5% for Absolute There is a choice of internal O ring seals to ensure that the device is compatible with a wide range of media. Permissible Load Setting Errors (offsets) Influence Effects Custom versions can be made for particular applications. Material Specifications Housing “O” ring seals Diaphragm Media wetted parts diaphragm Miscellaneous Current consumption Weight Installation position 90º Operational Life Insulation resistance Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] 303 Stainless Steel Viton 316L Stainless Steel Housing & connection, “O” ring seal, 2 -wire Limits at 28mA 3-wire Typical 6mA Approx 100g Any, small zero shift when tilted through > 100x 106 cycles > 50MOhms at 50Vdc ISO9001 C E R T I F I E D 2-wire 3-wire 2-wire 3-wire Supply Load Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS Rmax = [(Supply-9min)/0.02]W Rmin = 10kW <0.005% FS / 1V 0.05% FSO / kW Electrical Protection Supply reverse polarity No damage/no function Electromagnetic compatibility CE Compliant Mechanical Stability Shock 100g / 11s Vibration 10g RMS (20 - 2000Hz) Temperatures & Thermal Effects Media Temperature -40ºC to +125ºC Ambient Temperature -20ºC to +80ºC Storage temperature -40ºC to +125ºC Compensated temperature range +20ºC to +80ºC Thermal Zero Shift (TZS) <±0.04% /FS/ºC Thermal Span Shift <-0.015% /ºC www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IPSL series Low Range Industrial Pressure Sensor Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, mbar 50 Nominal Pressure, Absolute mbar Permissible Overpressure mbar 2 bar Output Signals and Supply Voltages Wire system Output 2-wire 4-20mA 3-wire DIN 43650 Supply Volts 9-32Vdc 0.5 - 4.5Vdc (non-ratiometric) 9-32 Vdc Part No IPSL-G0050-5 IPSL-G0100-5 IPSL-G0250-5 IPSL-G0500-5 IPSL-G0750-5 IPSL-G1000-5 IPSL-G0050-D IPSL-G0100-D IPSL-G0250-D IPSL-G0500-D IPSL-G0750-D IPSL-G1000-D IPSL-A0500-5 IPSL-A0750-5 IPSL-A1000-5 100 250 2 bar 2 bar 500 500 5 bar 750 750 5 bar Connection +ve Supply -ve Supply Ground Pin No. Pin 1 Pin 2 Earth pin +ve Supply -ve Supply +ve Output Ground Pin 1 Pin 2 Pin 3 Earth Pin Pressure Range 0 - 50mbar G 0 - 100mbar G 0 - 250mbar G 0 - 500mbar G 0 - 750mbar G 0 - 1000mbar G 0 - 50mbar G 0 - 100mbar G 0 - 250mbar G 0 - 500mbar G 0 - 750mbar G 0 - 1000mbar G 0 - 500mbar Abs 0 - 750mbar Abs 0 - 1000mbar Abs 1000 1000 5 bar Output 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 4-20mA 4-20mA 4-20mA Ip65 ISO9001 C E R T I F I E D 1/4” BSP Male www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.