LSTD EXD470 High durability, high efficiency Datasheet

EXD
Two-Way Radio Antenna
Laird's in-building wireless antennas are particularly applicable in environments where aesthetics and
wide angle coverage are necessary for successful wireless deployment. Their surprisingly small size
allow the antennas to be hidden almost anywhere, providing an invisible solution for most applications.
EXD450
External antennas are weather resistant and waterproof high-gain anntenas that provide an excellent
choice
for outdoor and indoor installation, and can be mounted on the outside of a housing.
Our antennas products are designed for maximum efficiency and are customizable and scalable to
meet your frequency and application requirements. Contact Laird today for your complete application
solutions!
FEATURES
•
•
•
•
Injection molded ¼ wave helical antenna
High durability, high efficiency
Textured finish with strain-relief base
Available in various standard connectors
arameter
SPECIFICATION
Frequency Range
UHF
Nominal Impedance
50 ohms
VSWR
1.5:1 max at resonance
Polarization
Vertical
Temperature Range
-40°C to +85°C
Drop Test
1M
ors
PART#
FREQUENCY BAND CONNECTORS
AVERAGE LENGTH
EXD400
400-420 MHz
3.4” - 3.8”
EXD410
BN, BNX, KR, MD, MX, MXI, SF, SFU, SM, SMI, SMV, TN & TNX
SMV
EXD420
420-450 MHz
BN, BNX, KR, MD, MX, SF, SFU, SM, SMV, TN & TNX
3.3” – 3.59”
EXD450
450-470 MHz
BN, BNX, KR, MD, MX, MXI, SF, SM, SMI, SMV, TN & TNX
2.95” – 3.88”
EXD470
470-512 MHz
BN, BNX, KR, MD, MX, MXI, SF, SFU, SM, SMI, SMV, TN & TNX
2.8” – 3.6”
The EXD model antenna is available in the above frequencies and connectors. Order by antenna model, frequency and
connector.
For example: EXD450MX. Length of each antenna will vary according to the connector chosen. Specifications subject to change
without notice.
Americas: +1.847 839.6925
[email protected]
Europe: +44.1628.858941
[email protected]
Asia:
[email protected]
Middle East & Affrica: +44.1628.858941
[email protected]
www.lairdtech.com
ANT-DS-EXD 1216
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials
rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or
suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind.
All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon
request. © Copyright 2016 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade
marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any
Laird Technologies or any third party intellectual property rights.
Similar pages