DDTC (R2-ONLY SERIES) E NPN PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features • • • • • Epitaxial Planar Die Construction Complementary PNP Types Available (DDTA) Built-In Biasing Resistor, R2 only Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 and 4) SOT-523 • • • • • • • Min Max Typ A 0.15 0.30 0.22 B 0.75 0.85 0.80 C 1.45 1.75 1.60 D — — 0.50 G G 0.90 1.10 1.00 H H 1.50 1.70 1.60 J 0.00 0.10 0.05 K 0.60 0.80 0.75 C B C TOP VIEW Mechanical Data • • Dim A Case: SOT-523 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Terminal Connections: See Diagram Marking Information: See Table Below & Page 2 Ordering Information: See Page 2 Weight: 0.002 grams (approximate) E B K M N J L D L 0.10 0.30 0.22 M 0.10 0.20 0.12 N 0.45 0.65 0.50 — 0° 8° α All Dimensions in mm C P/N DDTC114GE DDTC124GE DDTC144GE DDTC115GE R1 (NOM) Marking 10KΩ 22KΩ 47KΩ 100KΩ N26 N27 N28 N29 B R2 E SCHEMATIC DIAGRAM Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Collector Base Voltage VCBO 50 V Collector-Emitter Voltage VCEO 50 V Emitter-Base Voltage VEBO 5 V Collector Current IC (Max) 100 mA Power Dissipation Pd 150 mW RθJA 833 °C/W TJ, TSTG -55 to +150 °C Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage and Temperature Range Notes: 1. 2. 3. 4. Mounted on FR4 PC Board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30316 Rev. 8 – 2 1 of 3 www.diodes.com DDTC (R2-ONLY SERIES) E © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Symbol Min Typ Max Unit Collector-Base Breakdown Voltage Characteristic BVCBO 50 ⎯ ⎯ V IC = 50μA Collector-Emitter Breakdown Voltage BVCEO 50 ⎯ ⎯ V IC = 1mA BVEBO 5 ⎯ ⎯ V IE = 720μA, DDTC114GE IE = 330 μA, DDTC124GE IE = 160 μA, DDTC144GE IE = 72 μA, DDTC115GE ICBO ⎯ μA VCB = 50V μA VEB = 4V ⎯ 0.5 580 260 130 58 0.3 V IC = 10mA, IB = 0.5mA ⎯ ⎯ ⎯ IC = 5mA, VCE = 5V ΔR2 ⎯ 300 140 65 30 ⎯ 30 56 68 82 -30 ⎯ +30 % ⎯ fT ⎯ 250 ⎯ MHz VCE = 10V, IE = -5mA, f = 100MHz Emitter-Base Breakdown Voltage Collector Cutoff Current DDTC114GE DDTC124GE Emitter Cutoff Current DDTC144GE DDTC115GE Collector-Emitter Saturation Voltage DDTC114GE DDTC124GE DC Current Transfer Ratio DDTC144GE DDTC115GE IEBO VCE(sat) hFE Bleeder Resistor (R2) Tolerance Gain-Bandwidth Product* ⎯ Test Condition * Transistor – For Reference Only TYPICAL CURVES – DDTC114GE VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) PD, POWER DISSIPATION (MILLIWATTS) 250 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve 150 1 IC/IB = 10 0.1 -25°C 25°C 0.01 0.001 0 5 1,000 VCE = 10 hFE, DC CURRENT GAIN (NORMALIZED) 75°C 20 30 10 40 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 50 IE = 0mA COB, CAPACITANCE (pF) 4 100 10 1 DS30316 Rev. 8 – 2 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 2 of 3 www.diodes.com 3 2 1 0 0 10 15 25 20 5 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 30 DDTC (R2-ONLY SERIES) E © Diodes Incorporated 1,000 10 100 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) VO = 0.2 10 1 0.1 1 0.01 0.001 0 1 0.1 3 4 5 8 9 10 6 7 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 2 0 200 300 400 500 600 700 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current 100 Ordering Information (Note 5) Device DDTC1xxGE-7-F DDTC1xxGE-13-F Notes: 5. Packaging SOT-523 SOT-523 Shipping 3000/Tape & Reel 10,000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information xxx = Product Type Marking Code (See Page 1, e.g. N26 = DDTC114GE) YM = Date Code Marking Y = Year (ex: T = 2006) M = Month (ex: 9 = September) xxx YM Date Code Key Year 2006 2007 2008 2009 2010 2011 2012 T U V W X Y Z Code Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30316 Rev. 8 – 2 3 of 3 www.diodes.com DDTC (R2-ONLY SERIES) E © Diodes Incorporated