HMC774LC3B v00.0509 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz Typical Applications Features The HMC774LC3B is ideal for: Passive: No DC Bias Required • Point-to-Point Radios Input IP3: +22 dBm • Point-to-Multi-Point Radios & VSAT LO/RF Isolation: 35 dB • Test Equipment & Sensors Wide IF Bandwidth: DC - 8 GHz • Military End-Use 12 Lead Ceramic 3x3 mm SMT Package: 9mm2 Functional Diagram General Description The HMC774LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 7 and 34 GHz. This mixer requires no external components or matching circuitry. The HMC774LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates best with LO drive levels above +15 dBm. The HMC774LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, IF = 0.5 GHz, LO = +15 dBm* Parameter Min. Typ. Max. Min. Typ. Max. Frequency Range, RF & LO 7 - 20 20 - 34 GHz Frequency Range, IF DC - 8 DC - 8 GHz Conversion Loss 10 LO to RF Isolation 13 11 35 14 35 dB dB LO to IF Isolation 20 30 25 40 dB RF to IF Isolation 7 10 14 20 dB IP3 (Input) 20 22 dBm IP2 (Input) 45 48 dBm 1 dB Gain Compression (Input) 12 13 dBm *Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz. 9 - 392 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC774LC3B v00.0509 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz Conversion Gain vs. Temperature Isolation 0 -10 -8 ISOLATION (dB) -12 +25 C +85 C -40 C -16 LO/RF RF/IF LO/IF -20 -30 9 -40 -50 -20 -60 6 11 16 21 26 31 36 6 11 RF FREQUENCY (GHz) 26 31 36 31 36 31 36 Return Loss 0 0 RF LO -10 RETURN LOSS (dB) CONVERSION GAIN (dB) 21 FREQUENCY (GHz) Conversion Gain vs. LO Drive -20 11 dBm 13 dBm 15 dBm 17 dBm -30 -40 -5 -10 -15 -20 6 11 16 21 26 31 36 6 11 RF FREQUENCY (GHz) 16 21 26 FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive IF Bandwidth 0 CONVERSION GAIN (dB) 0 -5 RESPONSE (dB) 16 -10 -15 Conversion Gain IF Return Loss -20 -5 -10 -15 -20 9 dBm 11 dBm 13 dBm 15 dBm 17 dBm -25 -25 MIXERS - SINGLE & DOUBLE BALANCED - SMT CONVERSION GAIN (dB) -4 -30 0 2 4 6 8 IF FREQUENCY (GHz) 10 12 6 11 16 21 26 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 393 HMC774LC3B v00.0509 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz 35 35 30 30 25 25 20 15 10 20 15 +25 C +85 C -40 C 10 11 dBm 13 dBm 15 dBm 17 dBm 5 5 0 0 6 11 16 21 26 31 36 6 11 RF FREQUENCY (GHz) 21 26 70 70 60 60 50 50 40 30 31 36 +25 C +85 C -40 C 20 10 10 6 11 16 21 26 31 36 6 11 RF FREQUENCY (GHz) 16 21 26 RF FREQUENCY (GHz) MxN Spurious Outputs Input P1dB vs. Temperature 22 nLO 18 14 10 +25 C +85 C -40 C 6 mRF 0 1 2 3 0 xx 10 39 xx xx 1 5 0 37 43 xx 2 30 49 47 55 68 3 xx 74 62 45 63 4 xx xx xx 77 71 RF = 17.5 GHz @ -10 dBm LO = 18 GHz @ +15 dBm All values in dBc below the IF output power level. 2 6 11 16 21 26 31 36 RF FREQUENCY (GHz) [1] Two-tone input power = -10 dBm each tone, 1 MHz spacing. 9 - 394 36 40 30 11 dBm 13 dBm 15 dBm 17 dBm 20 31 Input IP2 vs. Temperature [1] IP2 (dBm) IP2 (dBm) 16 RF FREQUENCY (GHz) Input IP2 vs. LO Drive [1] P1dB (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT Input IP3 vs. Temperature [1] IP3 (dBm) 9 IP3 (dBm) Input IP3 vs. LO Drive [1] For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 HMC774LC3B v00.0509 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz Absolute Maximum Ratings +21 dBm LO Drive +27 dBm Channel Temperature 150 °C Continuous Pdiss (Ta = 85 °C) (derate 2.9 mW/°C above 85 °C) 189 mW Thermal Resistance (channel to ground paddle) 343 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT RF / IF Input 9 - 395 HMC774LC3B v00.0509 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz Pin Descriptions MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 9 - 396 Pin Number Function Description 1, 3, 7, 9, 10, 12 GND These pins and package bottom must be connected to RF/DC ground. 2 LO This pin is DC coupled and matched to 50 Ohms. 4, 6, 11 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC774LC3B v00.0509 GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz Evaluation PCB List of Materials for Evaluation PCB 125042 [1] Item Description J1 - J2 Southwest K Connector J3 Johnson SMA Connector U1 HMC774LC3B Mixer PCB [2] 125040 Evaluation PCB [1] Reference this number when ordering compete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 9 - 397