Online data sheet MLG5-1450F212 MLG MEASURING AUTOMATION LIGHT GRIDS MLG5-1450F212 | MLG MEASURING AUTOMATION LIGHT GRIDS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. MLG5-1450F212 1025254 Other models and accessories www.sick.de/MLG Detailed technical data Features Technology Sender/receiver Minimum detectable object (MDO) Parallel beam, 55 mm 1) Beam separation 50 mm Number of beams ≥ 30 Detection height 1,450 mm Configuration Parameterization interface (measuring) 1) MDO min. detectable object. Performance Maximum range 7 m 1) Minimum range Parallel beam: ≥ 0 mm Working range 5m Response time Parallel beam ≥ 5.5 ms 2) 1) 2) No reserve for environmental issue and deterioration of the diode. With resistive load. Interfaces Switching output 6 x PNP Inputs 2 x PNP Connection type Terminals Fieldbus, industrial network - Type of fieldbus integration - Mechanics/electronics Wave length Infrared light, 880 nm Supply voltage Vs DC 18 V ... 30 V 1) Power consumption sender ≥ 200 mA 2) Power consumption receiver ≥ 190 mA 2) Ripple < 5 Vpp Output current Imax. ≤ 100 mA 3) 1) 2) 3) 2 Without load. Without load with 24 V. Typical value. AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-01-29 09:44:08 Subject to change without notice MLG5-1450F212 | MLG MEASURING AUTOMATION LIGHT GRIDS Output load capacitive 100 nF Output load inductive 1H Initialization time 1s Dimensions (W x H x D) 34 mm x 1,675 mm x 29 mm Housing material Aluminum Indication 7-segment display, 7-segment display Synchronization Cable Enclosure rating IP 65 Circuit protection UV connections, reverse polarity protected, Output Q short-circuit protected, Interference pulse suppression Weight ≥ 3.835 kg Front screen PMMA 1) 2) 3) Without load. Without load with 24 V. Typical value. Ambient data Protection class III EMC EN 60947-5-2 Ambient temperature Operation: –25 °C ... +55 °C Storage: –40 °C ... +70 °C Ambient light immunity Direct: 12,500 lx 1) Indirect: 50,000 lx 1) Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Shock load 10 g / IEC 68-2-29 / 16 ms 1) Sunlight. 2016-01-29 09:44:08 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 3 MLG5-1450F212 | MLG MEASURING AUTOMATION LIGHT GRIDS 9 (0.35) 25 Dimensional drawing (Dimensions in mm (inch)) (0.98) A B C D E F A B Distance: MLG edge – first beam Beam separation MLG1 10 mm 1 49 (1.93) 160 (6.30) 1) Beam separation MLG2 20 mm 49 (1.93) 59 (2.32) 2) 170 (6.69) Beam separation MLG3 30 mm 69 (2.72) 180 (7.09) Beam separation MLG5 50 mm 89 (3.50) 200 (7.87) 1) 2) With even number of beams. With odd number of beams. B 2 3 A H I J K L M N O P Q R S T 4 5 6 16.5 (0.65) ① ② ③ ④ ⑤ ⑥ 4 29 34 (1.14) (1.34) Detection height (see optical performance) Beam separation (10, 20, 30, 50 mm) Status indicator: green, yellow, red LEDs Indicator panel, 7-segment display Terminals: M16 cable entry/connector M12, 12-pin Configuration connector M8, 4-pin AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-01-29 09:44:08 Subject to change without notice MLG5-1450F212 | MLG MEASURING AUTOMATION LIGHT GRIDS Adjustments LED indicator 5 6 7 8 9 1 NC 2 3 4 blinks with 3 Hz on out on or out ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Supply voltage Device error No object in the light path Contamination control Blocked Beams Hold (BBH) Activated teach-in procedure ParamMode is active Standby Error: E1 = sync. error; E2 = less receiver signal; E9 = defect Connection type and diagram 123456789ßàá Sender Receiver 1 L+ 1 L+ 2 M 2 M 3 Sync A 3 Sync A 4 Sync B 4 Sync B 5 TEST 5 In1 /Teach-in 6 nc 1 nc 1 nc 1 nc 1 nc 1 nc 1 nc 1 6 In2 7 Q1 8 Q2 9 Q3 10 Q4 11 Q5 /RS-485 A 12 Q6 /RS-485 B 7 8 9 10 11 12 ① Not assigned 2016-01-29 09:44:08 | Online data sheet Subject to change without notice AUTOMATION LIGHT GRIDS | SICK 5 MLG5-1450F212 | MLG MEASURING AUTOMATION LIGHT GRIDS A B C D E F H I J K L M N O P Q R S T Recommended accessories Other models and accessories www.sick.de/MLG Brief description Type Part no. Side mounting with T-nuts, 4 pieces, mounting hardware included BEF-NUT-MLG 2023696 Metal mounting bracket, compact, steel, zinc coated, Set, consisting of 4 pieces, without mounting hardware BEF-WK-XLG 2029100 BEF-2SMKEAKU4 2019649 SBO-02F12-SM 6029306 Head A: female connector, M12, 8-pin, straight Head B: cable Cable: PVC, shielded, 2 m DOL-1208-G02MA 6020633 Head A: female connector, M12, 8-pin, straight Head B: cable Cable: PVC, shielded, 5 m DOL-1208-G05MA 6020993 Head A: female connector, M12, 8-pin, straight Head B: cable Cable: PVC, shielded, 10 m DOL-1208-G10MA 6022152 Head A: female connector, M12, 8-pin, angled Head B: cable Cable: PVC, shielded, 2 m DOL-1208-W02MA 6020992 Head A: female connector, M12, 8-pin, angled Head B: cable Cable: PVC, shielded, 5 m DOL-1208-W05MA 6021033 DSL-8D04-G02M 2023695 Head A: female connector, M12, 8-pin, straight Head B: male connector, M12, 8-pin, straight Cable: drag chain use, PUR, halogen-free, shielded, 2 m DSL-1208-G02MAC 6030121 Head A: female connector, M12, 8-pin, straight Head B: male connector, M12, 8-pin, straight Cable: drag chain use, PUR, halogen-free, shielded, 5 m DSL-1208-G05MAC 6032325 Head A: female connector, M12, 8-pin, straight Head B: male connector, M12, 8-pin, straight Cable: drag chain use, PUR, halogen-free, shielded, 10 m DSL-1208-G10MAC 6034901 Mounting brackets and mounting plates Terminal and alignment brackets 4 pieces, Mounting kit 1, rotatable, swivel mount, plastic Adapters and distributors Male connector M12, 8-pin, straight, to 1 x female connector M12, 8-pin, straight and 1 x female connector M12, 8-pin, straight Plug connectors and cables Head A: female connector, M8, 4-pin, straight Head B: female connector, D-Sub, 9-pin, straight Cable: unshielded, 2 m Rectangular plug-in system, parameterization cable 6 AUTOMATION LIGHT GRIDS | SICK Online data sheet | 2016-01-29 09:44:08 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com