LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES * Directly connectable to TTL * High collector-emitter voltage ( VCEO = 70V ) * High input-output isolation voltage ( Viso = 5,000Vrms ) * Response time ( tr : TYP. 2µs at VCC = 5V, IF = 10mA, RL = 75Ω ) * Current transfer ratio ( CTR : MIN. 40% at IF = 10mA, VCE = 5V ) * Dual-in-line package : LTV-702F * Wide lead spacing package : LTV-702FM * Surface mounting package : LTV-702FS * Tape and reel packaging : LTV-702FS-TA1 * UL approved ( No. E113898 ) * TUV approved ( No. R9653630 ) * CSA approved ( No. CA91533-1 ) * FIMKO approved ( No. 193422-01 ) * NEMKO approved ( No. P96103013 ) * DEMKO approved ( No. 303968 ) * SEMKO approved ( No. 9646047 / 01-30 ) * VDE approved ( No. 094722 ) Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-702F : LTV-702FM : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-702FS : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 3 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV-702FS-TA1 : Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 105 mW Collector - Emitter Voltage VCEO 70 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 160 mW Ptot 200 mW Viso 5,000 Vrms Operating Temperature Topr -55 ~ +100 °C Storage Temperature Tstg -55 ~ +150 °C Tsol 260 °C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 5 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER INPUT OUTPUT VF — 1.4 1.7 V IF=60mA Reverse Current IR — — 10 µA VR=6V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 50 nA VCE=10V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 70 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10µA IF=0 IC 4 — 32 mA CTR 40 — 320 % Collector-Emitter Saturation Voltage VCE(sat) — 0.25 0.4 V IF=10mA IC=2.5mA Isolation Resistance Riso — Ω DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency fc — 150 — kHz VCC=5V, IF=10mA RL=75Ω,-3dB Response Time (Rise) tr — 2 7 µs Response Time (Fall) tf — 2 8 µs * Current Transfer Ratio * CTR = CONDITIONS Forward Voltage Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT 5×1010 1×1011 IF=10mA VCE=5V VCC=5V, IF=10mA RL=75Ω IC × 100% IF Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 6 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK CTR ( % ) LTV-702F A 40 ~ 80 LTV-702F B 63 ~ 125 LTV-702F C 100 ~ 200 LTV-702F D 160 ~ 320 LTV-702F A or B or C or D or No mark 40 ~ 320 IF = 10 mA CONDITIONS VCE = 5 V Ta = 25 °C Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 7 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current IF (mA) 80 60 40 20 0 -55 -25 0 25 50 75 100 125 200 160 150 100 50 0 -55 -25 Ambient temperature Ta ( C) 75 100 125 500 6 Ic= 0.5mA 1mA 2mA 3mA 5mA 5 4 o Ta= 25 C o Ta= 75 C o 50 C 200 Forward current IF (mA) Collector-emitter saturation voltage V (sat) (V) 50 Fig.4 Forward Current vs. Forward Voltage 3 2 1 25oC o 0C o -25 C 100 50 20 10 5 2 0 1 0 2.5 5.0 7.5 10.0 0 12.5 Fig.5 Current Transfer Ratio vs. Forward Current 1.5 2.0 45 VCE= 5V Ta= 25 C 40 o 140 Collector current Ic (mA) 160 1.0 R = 120 100 80 100k 60 2.5 3.0 Fig.6 Collector Current vs. Collector-emitter Voltage 200 180 0.5 Forward voltage VF (V) Forward current IF (mA) Current transfer ratio CTR (%) 25 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current 500k 40 20 35 o Ta= 25 C IF = 30mA 20mA 30 Pc(MAX.) 25 20 10mA 15 10 5mA 5 2mA 0 0 0 2 5 10 20 Forward current I F(mA) Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 0 o o 50 0 2 4 6 8 10 Collector-emitter voltage VCE(V) Page : 8 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Relative current transfer ratio (%) 150 I F= 10mA VCE= 5V 100 50 0 -55 -25 0 25 50 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage V (sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 -55 100 75 I F= 10mA I C= 2.5mA 10 -9 75 100 I F= 10mA VCC= 5V Ta= 25 C o 5 Response time ( s) Collector dark current ICEO(A) 10 -8 50 10 VCE= 10V 10 25 Fig.10 Response Time vs. Load Resistance -6 -7 0 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 10 -25 o o Ambient temperature Ta ( C) -10 10 -11 10 tr tf 2 1 -12 10 -13 10 0 -30 20 40 60 80 0.5 0.02 100 o Fig.11 Frequency Response Vcc IF= 10mA VCC= 5V Ta= 25 C 0 0.1 0.2 0.5 Test Circuit for Response Time 2 Voltage gain Av (dB) 0.05 Load resistance RL (k ) Ambient temperature Ta ( C) o Input RD RL Input Output Output 10% 90% -2 ts td -4 R = 200 150 tr 75 -6 tf Test Circuit for Frequency Response Vcc -8 RD -10 0.5 1 2 5 10 20 RL Output 50 100 200 500 Frequency f (kHz) Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 9 of 10 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-702F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 10 of 10