MBR1060, MBR1080, MBR1090, MBR10100 MBR1060 and MBR10100 are Preferred Devices SWITCHMODE Power Rectifiers This series of SWITCHMODE power rectifiers uses the Schottky Barrier principle with a platinum barrier metal. These state−of−the−art devices have the following features: SCHOTTKY BARRIER RECTIFIERS 10 AMPERES, 60 to 100 VOLTS Features • • • • • • • • www.kersemi.com Guard−Ring for Stress Protection Low Forward Voltage 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Low Power Loss/High Efficiency High Surge Capacity Low Stored Charge Majority Carrier Conduction Pb−Free Packages are Available* 3 1, 4 MARKING DIAGRAM 4 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AC CASE 221B PLASTIC AY WWG B10x0 KA 1 3 A Y WW G B10x0 x KA Device Package Shipping TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail TO−220 50 Units/Rail MBR1090G TO−220 (Pb−Free) 50 Units/Rail MBR10100 TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail MBR1060 MBR1060G MBR1080 MBR1080G MBR1090 MBR10100G 1 = Assembly Location = Year = Work Week = Pb−Free Package = Device Code = 6, 8, 9 or 10 = Diode Polarity MBR1060, MBR1080, MBR1090, MBR10100 MBR Rating Symbol 1060 1080 1090 10100 60 80 90 100 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR Average Rectified Forward Current (Rated VR) TC = 133°C IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 133°C IFRM 20 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 0.5 A TJ 65 to +175 °C Storage Temperature Tstg 65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s Operating Junction Temperature (Note 1) V Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP D/dTJ < 1/RJA. THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction−to−Case RJC 2.0 °C/W Maximum Thermal Resistance, Junction−to−Ambient RJA 60 °C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2) (iF = 10 Amps, TC = 125°C) (iF = 10 Amps, TC = 25°C) (iF = 20 Amps, TC = 125°C) (iF = 20 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = 125°C) (Rated dc Voltage, TC = 25°C) iR V 0.7 0.8 0.85 0.95 mA 6.0 0.10 2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. www.kersemi.com 2 50 TJ = 150°C 20 10 100°C 125°C 10 IR , REVERSE CURRENT (mA) 150°C 5.0 3.0 TJ = 25°C 1.0 1.0 0.1 25°C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 0.9 0 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 6.0 dc 5.0 RATED VOLTAGE APPLIED RJC = 2°C/W 2.0 1.0 110 100 80 120 Figure 2. Typical Reverse Current SQUARE WAVE 3.0 60 Figure 1. Typical Forward Voltage 8.0 4.0 40 VR, REVERSE VOLTAGE (VOLTS) 10 7.0 20 vF, INSTANTANEOUS VOLTAGE (VOLTS) 9.0 0 125°C 100°C 0.5 120 130 140 150 (HEATSINK) RJA = 16°C/W (NO HEATSINK) RJA = 60°C/W 8.0 7.0 6.0 RATED VOLTAGE APPLIED 5.0 dc dc 4.0 3.0 2.0 1.0 0 160 SQUARE WAVE 0 20 60 40 80 100 120 140 160 TA, AMBIENT TEMPERATURE (°C) Figure 3. Current Derating, Case Figure 4. Current Derating, Ambient 10 TA = 25°C 9.0 8.0 IPK/IAV = 7.0 6.0 IPK/IAV = 5.0 5.0 IPK/IAV = 10 4.0 dc IPK/IAV = 20 3.0 SQUARE WAVE 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 IF(AV), AVERAGE CURRENT (AMPS) Figure 5. Forward Power Dissipation www.kersemi.com 3 140 10 9.0 TC, CASE TEMPERATURE (°C) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) MBR1060, MBR1080, MBR1090, MBR10100 10 180 200 MBR1060, MBR1080, MBR1090, MBR10100 TO−220 PLASTIC CASE 221B−04 ISSUE D C B Q F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J http://onsemi.com 4 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27