Datatronic DR217-9-153 Radial leaded inductor Datasheet

October 11, 2006
DR217-9 SERIES RADIAL LEADED INDUCTORS
Features
z
z
z
z
Designed for EMI Filters & Switching Power Supplies
Inductance Range from 10µH to 10mH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 5)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part Number
Inductance (µH)
@1kHz
DCR (Ohm)
Max.
Rated Current
(A) Max. I sat
Rated Current
(A) Max. I rms
DR217-9-103
DR217-9-153
DR217-9-223
DR217-9-333
DR217-9-473
DR217-9-683
DR217-9-104
DR217-9-154
DR217-9-224
DR217-9-334
DR217-9-474
DR217-9-684
DR217-9-105
DR217-9-155
DR217-9-225
DR217-9-335
DR217-9-475
DR217-9-685
DR217-9-106
10 ± 20%
15 ± 10%
22 ± 10%
33 ± 10%
47 ± 10%
68 ± 10%
100 ± 10%
150 ± 10%
220 ± 10%
330 ± 10%
470 ± 10%
680 ± 10%
1000 ± 10%
1500 ± 10%
2200 ± 10%
3300 ± 10%
4700 ± 10%
6800 ± 10%
10000 ± 10%
0.023
0.028
0.035
0.043
0.052
0.068
0.097
0.14
0.2
0.3
0.43
0.61
1.0
1.3
2.0
3.1
4.4
6.5
10
8
6.5
5.5
4.5
3.6
3.1
2.6
2.1
1.7
1.4
1.1
0.95
0.78
0.64
0.53
0.43
0.36
0.3
0.24
5.1
4.5
4.2
3.7
3.4
3.0
2.5
2.1
1.7
1.4
1.1
0.99
0.78
0.68
0.55
0.44
0.37
0.3
0.24
MECHANICAL SPECIFICATIONS
XXX
.039 MIN.
1,00
1
.630 MAX.
16,00
.590 MIN.
15,00
2
.295 ±.039
7,50 ±1,00
Ø .551 MAX.
14,00
Ø .031
TYP
0,80
1
2
SCHEMATIC
NOTES:
1. Dimensions are shown in inches/millimeters
2. Unless otherwise specified, tolerance = Inches: ±0.012
= Millimeters: ±0,30
3. Isat based on the inductance being 90% of its initial value
4. Irms based on a temperature rise of 20°C
5. For non-RoHS parts replace DR prefix with 42- (e.g. DR217-9 becomes 42-217-9)
6. Terminal finish is compliant to RoHS requirements
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Similar pages