TOC Control Devices HIGH VOLTAGE PIN DIODES DESCRIPTION APPLICATIONS The GC4400 series are high voltage, high power (cathode base) PIN diodes. These high resistivity silicon devices are passivated with silicon dioxide for high stability and reliability and have been proven by thousands of device hours in high reliability systems. The GC4400 series can be used in RF circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from UHF through Ku band. Each device can withstand storage temperatures from -65° to +200°C and will operate over the range from -55° to +150°C. All devices meet or exceed military environmental specifications of MIL-S-19500. The GC4400 series will operate typically with +50 mA forward bias. Breakdown voltages are available up to 1000 volts. Switch applications include high speed switches (ECM systems), TR or lobing switches, channel or antenna selection switches (telecommunications), duplexers (radar) and digital phase shifters (phased arrays). The GC4400 series can be used in RF circuits as an on/off at moderate RF power levels. Attenuator type applications include amplitude modulators, AGC attenuators, power levelers and level set attenuators. ELECTRICAL SPECIFICATIONS: TA = 25°C BREAKDOWN VOLTAGE MODEL NUMBER (IR = 10µA MAX) VB (MIN)(Volts) JUNCTION 1 SERIES RESISTANCE 2 CARRIER LIFETIME (100mA, 100 MHz) (IR = 6mA, IF = 10mA) CJ-50 (MAX) RS100 (MAX) TL (TYP) (pF) (Ohms) (µsec) CAPACITANCE THERMAL RESISTANCE (MAX) (°C/W) GC4410 100 0.10 0.6 .2 40 GC4411 100 0.25 0.5 .5 25 20 GC4412 100 0.50 0.4 .7 GC4413 100 0.75 0.3 1.0 10 GC4430 300 0.10 1.5 .5 40 GC4431 300 0.25 1.2 1.0 30 GC4432 300 0.50 1.0 1.5 20 GC4433 300 0.75 0.8 2.0 10 GC4490 1000 0.10 1.5 1.0 30 GC4491 1000 0.25 1.2 2.0 25 GC4492 1000 0.50 1.0 3.0 20 GC4493 1000 0.75 0.8 5.0 10 GC4494 1000 1.3 .35 6.0 7 GC4495 1000 2.5 .3 7.5 5 3 3 3 Notes: 1. Capacitance is measured at 1 MHz and -50 volts. 2. Resistance is measured using transmission loss techniques. 3. These devices are not available in all case styles. Please consult the factory. specific package styles offered. The tabulated specifications above are for case style 30. Diodes are also available in various chip configurations. Each type offers trade offs in series resistance, junction capacitance, carrier lifetime and breakdown voltage; the proper choice of which depends on the end application. Reverse polarity diodes (NIP) and faster speed PIN and NIP diodes are also available. (See data sheets for GC4500, GC4200, and GC4300 series respectively.) RATINGS Maximum Leakage Current: 0.5µA at 80% of minimum rated breakdown Operating Temperature: -55°C to +150°C Storage Temperature: -65°C to +200°C SEMICONDUCTOR OPERATION 75 Technology Drive Lowell, MA 01851 Tel: 978-442-5600 Fax: 978-937-3748 75 TOC Control Devices HIGH VOLTAGE PIN DIODES TYPICAL PERFORMANCE CURVES SEMICONDUCTOR OPERATION 75 Technology Drive Lowell, MA 01851 Tel: 978-442-5600 Fax: 978-937-3748 76