A ll data sheet.com GBU10005 ~ GBU1010 Voltage 50V ~ 1000V 10.0Amp Glass Passivited Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free GBU FEATURES Surge overload rating -220 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has Underwriters Laboratory flammability classification 94V-0 Mounting position: Any REF. A B C D E F G H Millimeter Min. Max. 21.80 22.20 18.30 19.10 3.37 3.53 17.27 18.29 3.2 x 45° 3.40 4.10 5.40 5.90 2.30 2.70 REF. I J K L M N P Q Millimeter Min. Max. 0.9 1.2 0.46 0.56 4.80 5.30 2.16 2.54 1.65 2.03 1.45 1.85 9.80 10.20 10.90 11.10 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol GBU 10005 GBU 1001 GBU 1002 GBU 1004 GBU 1006 GBU 1008 GBU 1010 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward(with heat sink) 2 10 I(AV) Rectified Current @TC=100°C(without heat sink) Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 5A Maximum Reverse Current at Rated DC Blocking Voltage IFSM 220 A VF 1.1 V TJ=25°C TJ=125°C 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance Per Element Typical Thermal Resistance Operating and Storage temperature range 1 A 3 10 µA IR 500 It 2 200 As 2 CJ 70 pF RθJC 2.2 °C/W TJ,TSTG -55~150 °C Notes： 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Device mounted on 100mm*100mm*1.6mm Cu plate heat sink. Page 1 of 2 A ll data sheet.com GBU10005 ~ GBU1010 Voltage 50V ~ 1000V 10.0Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES Page 2 of 2