Connor-Winfield FPLD62T2G-100.0M 3.3v surface mount lvpecl clock Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
CW
0629
FPLD62T2G
100.0M
3.3V SURFACE MOUNT LVPECL CLOCK
FPLD62T2G
ABSOLUTE M AXIMUM RATING S
PARAMETER
TABLE 1.0
UNITS
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
125
°C
-0.5
-
7.0
Vdc
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
16
-50
-40
-
MHz
ppm
°C
1
-
250
50
85
Vdc
Storage Temperature
Supply Voltage
(Vcc)
OPERATING SPECIFIC ATIONS
NOTE
TABLE 2.0
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
3.135
3.3
3.465
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
pS RMS
Jitter (BW=12kHz to 20MHz)
-
-
1
pS RMS
Start Up Time
-
-
10
mS
MINIMUM
2.275
45
-
NOMINAL
50
-
MAXIMUM
50
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
LVPECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
(Voh)
(Vol)
PACKAG E CHARACTERISTICS
Package
DESCRIPTION
TABLE 3.0
NOTE
2
The Connor-Winfield
FPLD62T2G is a fixed
frequency, surface mount
Crystal Controlled Oscillator
(XO) designed for
applications requiring low
jitter and a ±50ppm overall
stability. Operating at 3.3V
supply voltage, the
FPLD62T2G provides
LVPECL Differential Outputs.
FEATURES
3.3V OPERATION
LVPECL DIFFERENTIAL OUTPUTS
3
LOW JITTER <1pS RMS
OVERALL FREQUENCY TOLERANCE:
±50ppm
TABLE 4.0
Non-hermetic package consisting of an FR4 substrate with grounded metal
cover.
TEMPERATURE RANGE: -40 to 85°C
SURFACE MOUNT PACKAGE
PROCESS RECOMMENDATIONS
TABLE 5.0
Soldering Process
Wash
See solder profile page 2.
Ultrasonic cleaning is not recommended.
TAPE AND REEL PACKAGING
Notes
1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years
aging.
2) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
3) Duty Cycle measured at 1.977V
RoHS COMPLIANT / LEAD FREE
ORDERING INFORMATION
FPLD62T2G - 100.0MHz
LV PECL
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Ec240
PAGE 1
OF
2
REV: 00
DATE:
07/17/06
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Pin Connections
FPLD62T2G
100.0M
CW
Package Layout
2
3
1
4
Q OUTPUT
GROUND
Q OUTPUT
Vcc
Dimensional Tolerance:
±.005” (.127mm)
Suggested Pad Layout
Output Waveform
80%
50%
20%
Test Circuit
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
2
0
120 S
Max.
Time
10 S
60 S
Max.
360 Sec. Max.
Specifications subject to change without notice.
DATA SHEET #:
Ec240
PAGE 2
OF
2
REV: 00
DATE:
07/17/06
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages