GP2S30 GP2S30 Long Focal Distance Type Photointerrupter with Connector ■ Features ■ Outline Dimensions 1. Long focal distance Detection distance: 3 to 7mm 2. High sensing accuracy by laser trimming of resistor 3. 3-pin connector 2 - 4.5 2 - 2.5 2- 3.0 ± 0.3 7.0 + 0.4 - 0.2 2 - 2.0 ± 0.3 10.0 ( Unit : mm ) Internal connection diagram 1 1 2 2 3 3 7.0 ± 0.3 1 Vo 9.0 16.0 ± 0.3 0.8 2 Vcc 3 GND 7.0 +- 0.4 0.2 ❈ GP2S30 (3.15) 2 - 2.7 ± 0.3 2 - 1.6 2 - 1.2 2 - 1.0 2 - 1.0 ± 0.3 7.6 ± 0.3 5.0 4.0 ± 0.3 2 - 1.0 ± 0.5 1. Printers 2. Facsimiles 3. Copiers 13.0 ± 0.5 ■ Applications ∗Tolerance:± 0.2mm ∗( ) : Reference dimensions ❈ Japan AMP made EI 3pin connector 171825-3 Recommended connector on the inserted side 172053-3, etc. ❈❈ ❈❈ Recommended connectors on the inserted side are shown on the below page. ■ Absolute Maximum Ratings Parameter Supply voltage Output current ∗1 Operating temperature ∗1 Storage temperature Symbol VCC IO T opr T stg ( Ta = 25˚C ) Rating - 0.5 to + 7 1 - 20 to + 70 - 40 to + 80 Unit V mA ˚C ˚C ∗1 The connector should be plugged in/out and the unit's hook should be used at normal temperature. ■ Electro-optical Characteristics Parameter Operating supply voltage Dissipation current Low level output voltage High level output voltage Response frequency ( VCC = 5V, Ta = 25˚C unless otherwise specified ) Symbol VCC I CC VOL VOH f Conditions Ta =- 20 to + 70˚C ∗2 At detecting, d = 5mm ∗3 At non-detecting, d = 5mm ∗2 At detecting, d = 5mm ∗4 MIN. 4.5 2.1 - TYP. 5.0 26 0.2 3.0 - MAX. 5.5 35 0.8 3.9 170 ∗2 At detecting : White PPC paper as a reflective object without external disturbing light in Fig. 1. ∗3 At non-detecting : Black suede tape as a reflective object without external disturbing light in Fig. 1. ∗4 The definition of response frequency is shown in Fig. 2. “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” Unit V mA V V Hz GP2S30 Fig. 1 Test Condition for V O Reflective object d= 5mm GP2S30 Fig. 2 Definition of Response Frequency VO waveform T 5mm f= Black VOH Rotation White VH-L GP2S30 VOL GP2S30 Rotating disk φ>= 40mm Response frequency: Rotational frequency f when V H-L decreases 3dB from DC. Fig. 3 Relative Output Voltage vs. Ambient Temperature Fig. 4 Dissipation Current vs. Supply Voltage 120 30 110 Reflective object: PPC paper ( white ) Dissipation current I CC ( mA ) Relative output voltage ( % ) VCC = 5V d= 5mm 100 90 80 70 - 20 0 20 40 Ambient temperature T a ( ˚C) 60 70 - 20˚C 25 25˚C T a = 70˚C 20 4.5 5.0 Supply voltage VCC ( V) 5.5 1 T GP2S30 Fig. 5 Relative Output Voltage vs. Detecting Distance Fig. 6 Relative Collector Voltage vs. Reflector Moving Distance ( 1 ) 100 VCC = 5V, d= 5mm Reflective object:PPC paper ( White ) Art work tape (black ) V CC = 5V Reflective object:PPC paper ( White ) 100 Relative collector current (% ) Relative output voltage (%) 80 d 60 40 20 L - 80 + d 60 40 0 20 0 -5 0 0 4 8 12 16 20 Distance between GP2S30 and reflector d ( mm ) 5 0 Reflector moving distance L ( mm ) Fig. 7 Relative Collector Voltage vs. Reflector Moving Distance ( 2 ) VCE = 5V, d= 5mm Reflective object:PPC paper ( White ) Art work tape (black ) Relative collector current (%) 100 L + - 80 d 60 0 40 20 0 - 5 5 0 Reflector moving distance L ( mm ) Recommended Mounting Holes ( mm ) + 0.17 - 0.12 mm Board thickness 1.2 Board thickness 1.0 +- 7.3 7.2 5.3 5.3 7 16 2- 4 Recommended Mounting Holes 2- 7 7 7 7.4 5.3 16 2- 2 GP 2S 30 Mounting Method + 0.17 - 0.12 mm 16 Board thickness 1.6 0.17 0.12 mm GP2S30 ■ Recommended Connectors on the Inserted Side ● JAPAN AMP made El series connector (standard type ) ● JAPAN AMP made EI Series connectors (low profile type) Natural Housing color color Black Blue Green Red Housing Model No. 171822-3 2-171822-3 4-171822-3 6-171822-3 8-171822-3 AWG Product Material Model No. shape size Brass 170204-1 Chain phosphor 170204-2 AWG bronze 26 to 20 170262-1 Brass Special Bulk phosphor terminal 170262-2 bronze Model No. Brass 170205-1 Chain phosphor 170205-2 AWG bronze 30 to 26 Brass 170263-1 Bulk phosphor 170263-2 bronze Housing color Natural Black Blue Green Red color Housing Model No. 172142-3 2-172142-3 4-172142-3 6-172142-3 8-172142-3 AWG Special Product shape Model No. size terminal Bulk 170369-1 AWG Model No. 26 to 22 Chain 170354-1 ( Material: Bulk 170370-1 AWG phosphor 30 to 26 Chain 170355-1 bronze ) ● JAPAN AMP made EI Series connectors (amp. mass termination) Housing terminal united type connector AWG28 AWG26 AWG24 AWG22 ( Green ) ( Natural color) ( Black ) ( Red ) 172054-3 172053-3 172052-3 172051-3 ∗ Terminal Material: phosphor bronze ■ Recommended Circuit Object GP2S30 VCC R3 + Comp. - VOUT R1 R2 R5 VCC R6 VOUT R4 GND GND ■ Precautions for Use ( 1 ) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case; therefore, dip cleaning or ultrasonic are prohibited. ( 2 ) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent. However, do not perform the above cleaning using a soft cloth with cleaning solvent in the marking portion. In this case, use only the following type of cleaning solvent used for wiping off: Ethyl alcohol, Methyl alcohol, Isopropyl alcohol, When the cleaning solvents except for specified materials are used, please consult us. ( 3 ) As for other general cautions, refer to the chapter “Precautions for Use ” .