BZD27C Series www.vishay.com Vishay Semiconductors Zener Diodes with Surge Current Specification FEATURES • Sillicon planar Zener diodes Available • Low profile surface-mount package • Zener and surge current specification • Low leakage current • Excellent stability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 17249 • Meets JESD 201 class 2 whisker test PRIMARY CHARACTERISTICS PARAMETER VALUE • ESD capability according to AEC-Q101: human body model: > 8 kV machine model: > 800 V UNIT VZ range nom. 3.6 to 200 V Test current IZT 5 to 100 mA VBR 7 to 188 V VWM 6.2 to 160 V • AEC-Q101 qualified • Wave and reflow solderable PPPM 150 W • Base P/N-E3 - RoHS-compliant, commercial grade TJ max. 175 °C • Base P/N-HE3 - RoHS-compliant, automotive grade VZ specification Pulse current Int. construction Single Polarity • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Uni-directional ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 per 7" reel (8 mm tape) 30 000/box 10 000 per 13" reel (8 mm tape) 50 000/box BZD27C3V6P-E3-08 to BZD27C200P-E3-08 BZD27C3V6P-HE3-08 to BZD27C200P-HE3-08 BZD27C Series BZD27C3V6P-E3-18 to BZD27C200P-E3-18 BZD27C3V6P-HE3-18 to BZD27C200P-HE3-18 PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING DO-219AB (SMF) 15 mg UL 94 V-0 MOISTURE SENSITIVITY WHISKER TEST LEVEL ACC. JESD 201 MSL level 1 (according J-STD-020) class 2 SOLDERING CONDITIONS Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Non repetitive peak surge power dissipation (2) TEST CONDITION SYMBOL VALUE TL = 105 °C Ptot 2300 mW TA = 30 °C (1) Ptot 800 mW 100 μs square pulse PZSM 300 W 10/1000 μs waveform PRSM 150 W RthJL 30 K/W RthJA 180 K/W Junction to lead Junction to ambient air Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) Junction temperature UNIT Tj 175 °C Storage temperature range Tstg -65 to +175 °C Operating temperature range Top -65 to +175 °C Notes (1) Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) (2) T = 25 °C prior to surge J Rev. 1.4., 15-Oct-15 Document Number: 85153 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE (1) TEST CURRENT VZ at IZT1 IZT1 V mA MARKING CODE MIN. NOM. MAX. REVERSE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT IR at VR ZZ at IZT1 VZ at IZT1 μA V MAX. %/°C TYP. MAX. MIN. MAX. -0.04 BZD27C3V6P D0 3.4 3.6 3.8 100 100 1 4 8 -0.14 BZD27C3V9P D1 3.7 3.9 4.1 100 50 1 4 8 -0.14 -0.04 BZD27C4V3P D2 4 4.3 4.6 100 25 1 4 7 -0.12 -0.02 BZD27C4V7P D3 4.4 4.7 5 100 10 1 3 7 -0.1 0 BZD27C5V1P D4 4.8 5.1 5.4 100 5 1 3 6 -0.08 0.02 BZD27C5V6P D5 5.2 5.6 6 100 10 2 2 4 -0.04 0.04 BZD27C6V2P D6 5.8 6.2 6.6 100 5 2 2 3 -0.01 0.06 BZD27C6V8P D7 6.4 6.8 7.2 100 10 3 1 3 0 0.07 BZD27C7V5P D8 7 7.5 7.9 100 50 3 1 2 0 0.07 BZD27C8V2P D9 7.7 8.2 8.7 100 10 3 1 2 0.03 0.08 BZD27C9V1P E0 8.5 9.1 9.6 50 10 5 2 4 0.03 0.08 BZD27C10P E1 9.4 10 10.6 50 7 7.5 2 4 0.05 0.09 BZD27C11P E2 10.4 11 11.6 50 4 8.2 4 7 0.05 0.1 BZD27C12P E3 11.4 12 12.7 50 3 9.1 4 7 0.05 0.1 BZD27C13P E4 12.4 13 14.1 50 2 10 5 10 0.05 0.1 BZD27C15P E5 13.8 15 15.6 50 1 11 5 10 0.05 0.1 BZD27C16P E6 15.3 16 17.1 25 1 12 6 15 0.06 0.11 BZD27C18P E7 16.8 18 19.1 25 1 13 6 15 0.06 0.11 BZD27C20P E8 18.8 20 21.2 25 1 15 6 15 0.06 0.11 BZD27C22P E9 20.8 22 23.3 25 1 16 6 15 0.06 0.11 BZD27C24P F0 22.8 24 25.6 25 1 18 7 15 0.06 0.11 BZD27C27P F1 25.1 27 28.9 25 1 20 7 15 0.06 0.11 BZD27C30P F2 28 30 32 25 1 22 8 15 0.06 0.11 BZD27C33P F3 31 33 35 25 1 24 8 15 0.06 0.11 BZD27C36P F4 34 36 38 10 1 27 21 40 0.06 0.11 BZD27C39P F5 37 39 41 10 1 30 21 40 0.06 0.11 BZD27C43P F6 40 43 46 10 1 33 24 45 0.07 0.12 BZD27C47P F7 44 47 50 10 1 36 24 45 0.07 0.12 BZD27C51P F8 48 51 54 10 1 39 25 60 0.07 0.12 BZD27C56P F9 52 56 60 10 1 43 25 60 0.07 0.12 BZD27C62P G0 58 62 66 10 1 47 25 80 0.08 0.13 BZD27C68P G1 64 68 72 10 1 51 25 80 0.08 0.13 BZD27C75P G2 70 75 79 10 1 56 30 100 0.08 0.13 BZD27C82P G3 77 82 87 10 1 62 30 100 0.08 0.13 BZD27C91P G4 85 91 96 5 1 68 60 200 0.08 0.13 BZD27C100P G5 94 100 106 5 1 75 60 200 0.09 0.13 BZD27C110P G6 104 110 116 5 1 82 80 250 0.09 0.13 BZD27C120P G7 114 120 127 5 1 91 80 250 0.09 0.13 BZD27C130P G8 124 130 141 5 1 100 110 300 0.09 0.13 BZD27C150P G9 138 150 156 5 1 110 130 300 0.09 0.13 BZD27C160P H0 153 160 171 5 1 120 150 350 0.09 0.13 BZD27C180P H1 168 180 191 5 1 130 180 400 0.09 0.13 BZD27C200P H2 188 200 212 5 1 150 200 500 0.09 0.13 Notes • Maximum VF = 1.2 V, at IF = 0.2 A • Electrical characteristics when used as voltage regulator diodes (1) Pulse test: t 5 ms p Rev. 1.4., 15-Oct-15 Document Number: 85153 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE TEST CURRENT REVERSE CURRENT CLAMPING VOLTAGE TEMPERATURE COEFFICIENT VZ at IZT1 IZT1 IR at VR VC at IRSM (1) VZ at IZT1 V mA MARKING CODE MIN. NOM. MAX. μA V MAX. V A MAX. %/C MIN. MAX. 0.07 BZD27C7V5P D8 7 7.5 7.9 100 1500 6.2 11.3 13.3 0 BZD27C8V2P D9 7.7 8.2 8.7 100 1200 6.8 12.3 12.2 0.03 0.08 BZD27C9V1P E0 8.5 9.1 9.6 50 100 7.5 13.3 11.3 0.03 0.08 BZD27C10P E1 9.4 10 10.6 50 20 8.2 14.8 10.1 0.05 0.09 BZD27C11P E2 10.4 11 11.6 50 5 9.1 15.7 9.6 0.05 0.1 BZD27C12P E3 11.4 12 12.7 50 5 10 17 8.8 0.05 0.1 BZD27C13P E4 12.4 13 14.1 50 5 11 18.9 7.9 0.05 0.1 BZD27C15P E5 13.8 15 15.6 50 5 12 20.9 7.2 0.05 0.1 BZD27C16P E6 15.3 16 17.1 25 5 13 22.9 6.6 0.06 0.11 BZD27C18P E7 16.8 18 19.1 25 5 15 25.6 5.9 0.06 0.11 BZD27C20P E8 18.8 20 21.2 25 5 16 28.4 5.3 0.06 0.11 BZD27C22P E9 20.8 22 23.3 25 5 18 31 4.8 0.06 0.11 BZD27C24P F0 22.8 24 25.6 25 5 20 33.8 4.4 0.06 0.11 BZD27C27P F1 25.1 27 28.9 25 5 22 38.1 3.9 0.06 0.11 BZD27C30P F2 28 30 32 25 5 24 42.2 3.6 0.06 0.11 BZD27C33P F3 31 33 35 25 5 27 46.2 3.2 0.06 0.11 BZD27C36P F4 34 36 38 10 5 30 50.1 3 0.06 0.11 BZD27C39P F5 37 39 41 10 5 33 54.1 2.8 0.06 0.11 BZD27C43P F6 40 43 46 10 5 36 60.7 2.5 0.07 0.12 BZD27C47P F7 44 47 50 10 5 39 65.5 2.3 0.07 0.12 BZD27C51P F8 48 51 54 10 5 43 70.8 2.1 0.07 0.12 BZD27C56P F9 52 56 60 10 5 47 78.6 1.9 0.07 0.12 BZD27C62P G0 58 62 66 10 5 51 86.5 1.7 0.08 0.13 BZD27C68P G1 64 68 72 10 5 56 94.4 1.6 0.08 0.13 BZD27C75P G2 70 75 79 10 5 62 103.5 1.5 0.08 0.13 BZD27C82P G3 77 82 87 10 5 68 114 1.3 0.08 0.13 BZD27C91P G4 85 91 96 5 5 75 126 1.2 0.09 0.13 BZD27C100P G5 94 100 106 5 5 82 139 1.1 0.09 0.13 BZD27C110P G6 104 110 116 5 5 91 150 1 0.09 0.13 BZD27C120P G7 114 120 127 5 5 100 167 0.9 0.09 0.13 BZD27C130P G8 124 130 141 5 5 110 185 0.81 0.09 0.13 BZD27C150P G9 138 150 156 5 5 120 205 0.73 0.09 0.13 BZD27C160P H0 153 160 171 5 5 130 224 0.67 0.09 0.13 BZD27C180P H1 168 180 191 5 5 150 252 0.6 0.09 0.13 BZD27C200P H2 188 200 212 5 5 160 278 0.54 0.09 0.13 Notes • Maximum VF = 1.2 V, at IF = 0.2 A • Electrical characteristics when used as protection diodes (1) Non-repetitive peak reverse current in accordance with “IEC 60-1, section 8” (10/1000 μs pulse); see fig. 4 Rev. 1.4., 15-Oct-15 Document Number: 85153 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 IF - Forward Current (A) IRSM (%) Max. VF t1 = 10 µs t2 = 1000 µs 100 Typ. VF 90 1 50 10 0.1 0.6 0.8 17411 1.0 1.2 1.4 17415 VF - Forward Voltage (V) Fig. 1 - Forward Current vs. Forward Voltage t t1 1.6 t2 Fig. 4 - Non-Repetitive Peak Reverse Current Pulse Definition CD - Typ. Junction Capacitance (pF) 10 000 C5V1P C6V8P C18P C12P 1000 100 C27P C51P C200P 10 0 0.5 17412 1.0 1.5 2.0 2.5 3.0 VR - Reverse Voltage (V) Fig. 2 - Typ. Diode Capacitance vs. Reverse Voltage Ptot - Total Power Dissipation (W) 3.0 RthJL = 30K/W 2.5 2.0 1.5 RthJA = 180K/W 1.0 0.5 0 22774 0 25 50 75 100 125 150 175 Tamb - Ambient Temperature (°C) Fig. 3 - Power Dissipation vs. Ambient Temperature Rev. 1.4., 15-Oct-15 Document Number: 85153 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO219-AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.1(0.003) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 1.4., 15-Oct-15 Document Number: 85153 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS FOR SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 1.4., 15-Oct-15 Document Number: 85153 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C Series www.vishay.com Vishay Semiconductors ORIENTATION IN CARRIER TAPE - SMF Unreeling direction SMF cathode Top view Document no.: S8-V-3717.02-003 (4) Created - Date: 09. Feb. 2010 22670 Rev. 1.4., 15-Oct-15 Document Number: 85153 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000