Hittite HMC-PC06 Synthesized signal generator, 10 mhz to 40 ghz Datasheet

HMC-T2240
Synthesized Signal Generator, 10 MHz to 40 GHz
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
Wide Frequency Range, 10 MHz to 40 GHz Signal Generator!
9
The HMC-T2240 is an easy to implement test equipment solution designed to fulfill your signal
generation needs. Built on a foundation of high quality and market leading Hittite MMICs, the
HMC-T2240 provides the highest output power, lowest harmonic levels and broadest frequency
range amongst signal generators of its size and cost.
This compact and lightweight signal generator also features USB, GPIB and Ethernet
interfaces ensuring carefree integration within various test environments while improving overall
productivity and equipment utilization.
Applications
 ATE
 Test & Measurement
 R&D Laboratories
SYNTHESIZED SIGNAL GENERATOR
Advantages
9-2
 Versatile: Higher Drive Simplifies Test Set-Ups
 Efficient: 500 μs Frequency Switching
 Reliable: Incorporates Hittite MMICs
 Flexible: Manual or Software Control
Via USB, GPIB or Ethernet
Performance
 High Output Power: +29 dBm @ 1 GHz
 Wide Frequency Range:
10 MHz to 40 GHz
 Excellent Phase Noise Performance:
-96 dBc/Hz @ 10 kHz Offset @ 10 GHz
 Spurious Rejection: -65 dBc @ 10 GHz
 Power Resolution: 0.1 dB
 Frequency Resolution: 1 Hz
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
Frequency
Output Power Range @ 25°C
40
Accuracy: As Per Internal Ref. ±2 ppm
Resolution: 1 Hz
Internal Reference: 10 MHz
Aging Rate: <1 ppm/yr
External Reference Input: 10 MHz (Sine)
Internal Reference Output: 10 MHz (Square Wave)
OUTPUT POWER (dBm)
(Maximum Leveled)
9
30
25
20
15
10
5
0
Power Output (dBm)
0
4
8
12
16
20
24
28
32
36
40
FREQUENCY (GHz)
26
29
29
29
28
26
25
21
20
22
21
20
SSB Phase Noise vs. Frequency
0
-20
Minimum Settable: -40 dBm
Dynamic Range: >60 dB
Resolution: 0.1 dB
Power Accuracy: ±1 dB for leveled outputs
10 MHz
1 GHz
5 GHz
10 GHz
15 GHz
-40
-60
20 GHz
25 GHz
30 GHz
40 GHz
-80
-100
-120
-140
-160
1e+1
1e+2
1e+3
1e+4
1e+5
1e+6
1e+7
FREQUENCY OFFSET (Hz)
Spurious @ 10 dBm Output
< -60 dBc @ Integer Frequencies
< -45 dBc @ Fractional Frequencies
Harmonics
Frequency
(GHz)
0.01
0.05
0.1
0.5
1
2
5
10
15
20
25
SSB Phase Noise (dBc/Hz)
2nd
Harmonics
(dBc)
-20
-36
-21
-27
-30
-30
-38
-29
-27
-42
-26
3rd
Harmonics
(dBc)
-36
-41
-31
-38
-49
-52
-56
-55
-44
-
Offset From Carrier
Frequency
(GHz)
10 Hz
100 Hz
1 kHz
0.01
0.10
0.50
1
5
10
15
20
25
30
40
-79
-88
-85
-87
-72
-61
-60
-51
-55
-53
-50
-89
-95
-93
-89
-75
-64
-62
-60
-63
-65
-59
-100
-103
-117
-111
-96
-90
-87
-84
-78
-82
-78
10 kHz 100 kHz 1 MHz 10 MHz
-106
-110
-122
-116
-102
-96
-92
-90
-83
-87
-84
-102
-104
-120
-114
-98
-92
-90
-86
-82
-85
-81
-126
-128
-135
-134
-123
-117
-110
-111
-99
-105
-105
Output Noise: Floor < -155 dBc/Hz
Output Power = +10 dBm
-140
-140
-136
-146
-145
-142
-133
-136
-126
-120
-126
SYNTHESIZED SIGNAL GENERATOR
Frequency
(GHz)
0.01
0.1
0.5
1
5
10
15
20
25
30
35
40
SSB PHASE NOISE (dBc/Hz)
Output Power
35
Above data is typical performance at +25°C after 30 minutes of warm-up time unless otherwise stated.
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
9-3
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
General Specifi cations
9
Mechanical Vibration & Shock:
Power - AC:
100 to 240 VAC @ 50 to 60 Hz
Calibration: 1 Year
Environment (for indoor use only): 0 to 35 °C
Cooling: 2 Internal Fans
Input / Output:
10 MHz REFOUT [1]
10 MHz REFIN [2]
TRIGGER IN [3]: TTL
TRIGGER OUT [3]: TTL
RS-232 (used for field upgrades)
Ethernet
GPIB
USB 1.1/2.0
RF Output 2.92mm Female
MIL-STD 810 Table 415.5 C-VII
MIL-STD 202 MTD 214 1.5G
Compliance [4]:
CSA & CE
General Mechanical Characteristics
H: 76.2 mm (3 in)
W: 203 mm (8 in)
D: 305 mm (12 in)
Weight 3.2 kg (7 lbs)
Warranty: 1 Year Parts and Labor
[1] +10 dBm typ. into 50 Ohms; BNC Connector
[2] -5 dBm min. 50 Ohms; BNC Connector
[3] The trigger input can be driven from either 3.3V or 5V sources for direct interface with TTL signal levels; BNC Connector
[4] Testing in Process
SYNTHESIZED SIGNAL GENERATOR
Two Tone Third Order Intercept Test Set-up
HMC-T2240
I/O
CONTROL
HMC-T2240
Spectrum Analyzer
RFIN
HMC-T2240
RF
DUT
LO
IF
Device Under Test
• Amplifiers
• Mixers & Converters
• Modulators
• RFICs & Subsystems
Efficient Mixer Conversion Loss, Isolation & MxN Spurious Test Set-up
HMC-T2240
Device Under Test
• Single or Double-Balanced Mixers
• Up/Down Converters
• I/Q Mixers
LO
DUT
I/O
CONTROL
IF
HMC-T2240
RF
Spectrum Analyzer
RFIN
9-4
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
HMC-T2240 Rear Panel I/O Connections
9
Its compact size, light weight, fast switching speed and USB,
GBIP and Ethernet control interfaces support the standard
SCPI command set ensuring smooth integration within all test
environments, particularly those associated with automated
test. An installation disk that accompanies each unit includes
all the drivers required to remotely control the device as well as
a user friendly GUI interface (right) compatible with a Windows
XP ®, Windows 7® or Windows Vista® operating system. User
control is facilitated via pull down menus that allow programming of single or swept modes in frequency or power. Integration of multiple units within a production test environment is
easy, and affordable.
Remote Interface
Hardware: USB (Windows XP®, Windows 7®,
Windows Vista® Drivers Supplied), GPIB or Ethernet
Software: LabVIEW 2009 Driver
Frequency Switching Speed:
500 us Typ.
Local Interface
Front Panel Rotary Knob & Display
SYNTHESIZED SIGNAL GENERATOR
Connectivity & Control
Windows ® - Windows XP ® , Windows 7 ® and Windows Vista ® are
registered trademarks of Microsoft Corporation.
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
9-5
HMC-T2240
SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 40 GHz
v01.0710
HMC-T2240
9
Ordering Information
Test Rack Mount Kit
Model Number
Description
HMC-T2240
Synthesized Signal Generator
10 MHz to 40 GHz
Price
$19,498.00
Part Number
Description
Price
HMC-RM02
Dual Rack Mounting Plate
19” 2u Chassis
$385.00
SYNTHESIZED SIGNAL GENERATOR
Includes 100 - 240V AC Power Supply and one Power Cord at no cost.
Please specify your preferred power cord part number at time of
ordering. (see “Optional Power Cord” table)
Power Cord
Part Number
Region
HMC-PC01
Continental Europe
HMC-PC02
United Kingdom
HMC-PC03
China
HMC-PC04
Australia, New Zealand
HMC-PC05
North America
HMC-PC06
South Africa / India
HMC-PC07
Switzerland
HMC-PC08
Denmark
HMC-PC09
Israel
HMC-PC10
Italy
HMC-PC11
Japan
All pricing is in U.S. Dollars and is subject to change without notice.
9-6
20 Alpha Road Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Instrumentation Product Support at [email protected]
Similar pages