CHONGQING PINGYANG ELECTRONICS CO.,LTD. FR2A THRU FR2K FAST RECOVERY PLASTIC RECTIFIER VOLTAGE：50-800V CURRENT：2.0A FEATURES SMB(DO-214AA) ·Ideal for surface mounted applications ·Low leakage current ·Glass passivated junction .083(2.11) .075(1.91) .155(3.94) .130(3.30) .185(4.70) .160(4.06) MECHANICAL DATA .012(0.305) .006(0.152) .096(2.44) .084(2.13) ·Case: Molded plastic ·Epoxy: UL94V-0 rate flame retardant ·Terminals: Solder plated,solderable per MIL-STD- 750, Method 2026 ·Polarity: As marked ·Mounting position: Any ·Weight: 0.064 grams .060((1.52) .030(0.76) .008(0.203) .002(0.051) .220(5.59) .200(5.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL FR2A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Current at TA=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25°C @ TA=125°C VRRM VRMS VDC 50 35 50 FR2B FR2D FR2G FR2J 100 70 100 200 140 200 400 280 400 600 420 600 FR2K units 800 560 800 V V V Io 2.0 A IFSM 60 A VF 1.3 V 5.0 µA IR 50 30 Typical Thermal Resistance (Note3) RθJL Maximum Reverse Recovery Time (Note 2) trr 150 250 Typical Junction Capacitance (Note1) CJ 15 Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 3.Thermal Resistance (Junction to Ambient), .24in2 (6.0mm2) copper pads to each terminal １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn °C/W 500 nS pF