NXP HEF4894BTT 12-stage shift-and-store register led driver Datasheet

HEF4894B
12-stage shift-and-store register LED driver
Rev. 7 — 13 August 2010
Product data sheet
1. General description
The HEF4894B is a 12-stage serial shift register. It has a storage latch associated with
each stage for strobing data from the serial input (D) to the parallel LED driver outputs
(QP0 to QP11). Data is shifted on positive-going clock (CP) transitions. The data in each
shift register stage is transferred to the storage register when the strobe (STR) input is
HIGH. Data in the storage register appears at the output whenever the output enable (OE)
input signal is HIGH.
Two serial outputs (QS1 and QS2) are available for cascading a number of HEF4894B
devices. Serial data is available at QS1 on positive-going clock edges to allow high-speed
operation in cascaded systems with a fast clock rise time. The same serial data is
available at QS2 on the next negative going clock edge. This is used for cascading
HEF4894B devices when the clock has a slow rise time.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS
(usually ground). Unused inputs must be connected to VDD, VSS, or another input. It is
also suitable for use over both the industrial (−40 °C to +85 °C) and automotive (−40 °C to
+125 °C) temperature ranges.
2. Features and benefits
„
„
„
„
„
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Operates across the automotive temperature range from −40 °C to +125 °C
Complies with JEDEC standard JESD 13-B
3. Applications
„ Automotive and industrial
4. Ordering information
Table 1.
Ordering information
All types operate from −40 °C to +125 °C.
Type number
Package
Name
Description
Version
HEF4894BP
DIP20
plastic dual in-line package; 20 leads (300 mil)
SOT146-1
HEF4894BT
SO20
plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
HEF4894BTT
TSSOP20
plastic thin shrink small outline package; 20 leads; body width 4.4 mm
SOT360-1
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
5. Functional diagram
2
3
1
CP
STR
QS1
11
QS2
12
QP0
4
QP1
5
QP2
6
QP3
7
QP4
8
QP5
9
QP6
18
D
QP7
17
QP8
16
QP9
15
QP10
14
QP11
13
OE
19
Fig 1.
001aai639
Logic Symbol
D
CP
2
12
12-STAGE SHIFT REGISTER
3
11
STR
OE
1
QS1
12-BIT STORAGE REGISTER
19
OPEN-DRAIN OUTPUTS
4
5
QP0
6
7
QP2
QP1
Fig 2.
QS2
8
9
QP4
QP3
18
17
QP6
QP5
16
15
QP8
QP7
14
13
QP10
QP9
QP11 001aag118
Functional diagram
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
2 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
STAGE 0
D
D
Q
STAGE 1 TO 10
D
Q10S
STAGE 11
D
FF0
D
FF11
CP
QS1
Q
Q
QS2
LATCH
CP
LE
CP
D
D
Q
Q
LATCH
LATCH
LE
LE
STR
OE
QP0 QP1
Fig 3.
QP11
QP10
001aag119
Logic diagram
6. Pinning information
6.1 Pinning
STR
1
20 VDD
D
2
19 OE
CP
3
18 QP6
QP0
4
17 QP7
QP1
5
16 QP8
HEF4894B
QP2
6
15 QP9
QP3
7
14 QP10
QP4
8
13 QP11
QP5
9
12 QS2
VSS 10
11 QS1
001aag117
Fig 4.
Pin configuration
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
3 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
6.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
D
2
serial input
QP0 to QP11
4, 5, 6, 7, 8, 9, 18, 17, 16, 15, 14, 13
parallel output
QS1
11
serial output
QS2
12
serial output
CP
3
clock input
STR
1
strobe input
OE
19
output enable input
VDD
20
supply voltage
VSS
10
ground (0 V)
7. Functional description
Table 3.
Function table[1]
At the positive clock edge the information in the 10th register stage is transferred to the 11th register stage and the QS output
Control
Input
Parallel output
Serial output
CP
OE
STR
D
QP0
QPn
QS1[2]
QS2[3]
↑
L
X
X
Z
Z
Q10S
no change
↓
L
X
X
Z
Z
no change
Q11S
↑
H
L
X
no change
no change
Q10S
no change
↑
H
H
L
Z
QPn − 1
Q10S
no change
↑
H
H
H
L
QPn − 1
Q10S
no change
↓
H
H
H
no change
no change
no change
Q11S
[1]
H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↑ = LOW-to-HIGH clock transition; ↓ = HIGH-to-LOW clock transition;
Z = high-impedance OFF-state.
[2]
Q10S = the data in register stage 10 before the LOW to HIGH clock transition.
[3]
Q11S = the data in register stage 11 before the HIGH to LOW clock transition.
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
4 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
clock input
data input
strobe input
output enable
input
internal Q0S
(FF 1)
QP0 output
internal Q10S
(FF 11)
QP10 output
serial QS1
output
serial QS2
output
001aag121
Fig 5.
Timing diagram
8. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDD
supply voltage
IIK
input clamping current
VI
input voltage
IOK
output clamping current
II
input leakage current
IO
output current
Conditions
Min
−0.5
VI < −0.5 V or VI > VDD + 0.5 V
−0.5
QSn outputs; VO < −0.5 V or VO > VDD + 0.5
V
-
QPn outputs; VO < 0.5 V
Max
+18
±10
VDD + 0.5
Unit
V
mA
V
±10
mA
-
40
mA
-
±10
mA
QSn outputs
-
±10
mA
QPn outputs
-
40
mA
Tstg
storage temperature
−65
+150
°C
Tamb
ambient temperature
−40
+125
°C
Ptot
total power dissipation
P
power dissipation
Tamb = −40 °C to +125 °C
DIP20 package
[1]
-
750
mW
SO20 package
[2]
-
500
mW
TSSOP20 package
[3]
-
500
mW
-
100
mW
per output
[1]
For DIP20 package: Ptot derates linearly with 12 mW/K above 70 °C.
[2]
For SO20 package: Ptot derates linearly with 8 mW/K above 70 °C.
[3]
For TSSOP20 package: Ptot derates linearly with 5.5 mW/K above 60 °C.
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
5 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
9. Recommended operating conditions
Table 5.
Recommended operating conditions
Symbol
Parameter
VDD
VI
Conditions
Min
Typ
Max
Unit
supply voltage
3
-
15
V
input voltage
0
-
VDD
V
Tamb
ambient temperature
in free air
−40
-
+125
°C
Δt/ΔV
input transition rise and fall rate
VDD = 5 V
-
-
3.75
μs/V
VDD = 10 V
-
-
0.5
μs/V
VDD = 15 V
-
-
0.08
μs/V
10. Static characteristics
Table 6.
Static characteristics
VSS = 0 V; VI = VSS or VDD; unless otherwise specified.
Symbol Parameter
VIH
VIL
VOH
VOL
Conditions
HIGH-level
input voltage
|IO| < 1 μA
LOW-level
input voltage
|IO| < 1 μA
HIGH-level
output voltage
LOW-level
output voltage
IOL
II
HIGH-level
output current
LOW-level
output current
input leakage
current
HEF4894B
Product data sheet
Tamb = −40 °C Tamb = +25 °C Tamb = +85 °C Tamb = +125 °C Unit
Min
Max
Min
Max
Min
Max
Min
Max
5V
3.5
-
3.5
-
3.5
-
3.5
-
V
10 V
7.0
-
7.0
-
7.0
-
7.0
-
V
15 V
11.0
-
11.0
-
11.0
-
11.0
-
V
5V
-
1.5
-
1.5
-
1.5
-
1.5
V
10 V
-
3.0
-
3.0
-
3.0
-
3.0
V
15 V
-
4.0
-
4.0
-
4.0
-
4.0
V
5V
4.95
-
4.95
-
4.95
-
4.95
-
V
10 V
9.95
-
9.95
-
9.95
-
9.95
-
V
15 V
14.95
-
14.95
-
14.95
-
14.95
-
V
5V
-
0.05
-
0.05
-
0.05
-
0.05
V
10 V
-
0.05
-
0.05
-
0.05
-
0.05
V
15 V
-
0.05
-
0.05
-
0.05
-
0.05
V
5V
-
0.75
-
0.75
-
1.5
-
1.5
V
10 V
-
0.75
-
0.75
-
1.5
-
1.5
V
15 V
-
0.75
-
0.75
-
1.5
-
1.5
V
VO = 2.5 V
5V
−1.7
-
−1.4
-
−1.1
-
−1.1
-
mA
VO = 4.6 V
5V
−0.64
-
−0.5
-
−0.36
-
−0.36
-
mA
VO = 9.5 V
10 V
−1.6
-
−1.3
-
−0.9
-
−0.9
-
mA
VO = 13.5 V 15 V
−4.2
-
−3.4
-
−2.4
-
−2.4
-
mA
QSn outputs;
|IO| < 1 μA
QSn outputs;
|IO| < 1 μA
QPn outputs;
|IO| < 20 mA
IOH
VDD
QSn outputs
QSn outputs
VO = 0.4 V
5V
0.64
-
0.5
-
0.36
-
0.36
-
mA
VO = 0.5 V
10 V
1.6
-
1.3
-
0.9
-
0.9
-
mA
VO = 1.5 V
15 V
4.2
-
3.2
-
2.4
-
2.4
-
mA
15 V
-
±0.1
-
±0.1
-
±1.0
-
±1.0
μA
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
6 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
Table 6.
Static characteristics …continued
VSS = 0 V; VI = VSS or VDD; unless otherwise specified.
Symbol Parameter
IOZ
IDD
CI
OFF-state
output current
supply current
Conditions
VDD
QPn output
is HIGH;
VO = 15 V
Min
Max
Min
Max
Min
Max
Min
Max
5V
-
2
-
2
-
15
-
15
μA
10 V
-
2
-
2
-
15
-
15
μA
15 V
-
2
-
2
-
15
-
15
μA
5V
-
5
-
5
-
150
-
150
μA
10 V
-
10
-
10
-
300
-
300
μA
15 V
-
20
-
20
-
600
-
600
μA
-
-
-
-
7.5
-
-
-
-
pF
Extrapolation formula
Min
Typ
Max
Unit
IO = 0 A
input
capacitance
Tamb = −40 °C Tamb = +25 °C Tamb = +85 °C Tamb = +125 °C Unit
11. Dynamic characteristics
Table 7.
Dynamic characteristics
VSS = 0 V; Tamb = 25 °C unless otherwise specified. For test circuit see Figure 10.
Symbol Parameter
tPHL
HIGH to LOW
propagation delay
Conditions
CP to QS1;
see Figure 6
CP to QS2;
see Figure 6
tPLH
LOW to HIGH
propagation delay
CP to QS1;
see Figure 6
CP to QS2;
see Figure 6
tPZL
OFF-state to LOW
propagation delay
CP to QPn;
see Figure 6
STR to QPn;
see Figure 7
tPLZ
LOW to OFF-state
propagation delay
CP to QPn;
see Figure 6 and 7
STR to QPn;
see Figure 7
HEF4894B
Product data sheet
VDD
5V
[1]
132 ns + (0.55 ns/pF)CL
-
160
320
ns
10 V
53 ns + (0.23 ns/pF)CL
-
65
130
ns
15 V
37 ns + (0.16 ns/pF)CL
-
45
90
ns
5V
92 ns + (0.55 ns/pF)CL
-
120
240
ns
10 V
39 ns + (0.23 ns/pF)CL
-
50
100
ns
15 V
32 ns + (0.16 ns/pF)CL
-
40
80
ns
102 ns + (0.55 ns/pF)CL
-
130
260
ns
44 ns + (0.23 ns/pF)CL
-
55
110
ns
15 V
32 ns + (0.16 ns/pF)CL
-
40
80
ns
5V
102 ns + (0.55 ns/pF)CL
-
130
260
ns
10 V
49 ns + (0.23 ns/pF)CL
-
60
120
ns
15 V
37 ns + (0.16 ns/pF)CL
-
45
90
ns
5V
10 V
[1]
5V
-
240
480
ns
10 V
-
80
160
ns
15 V
-
55
110
ns
5V
-
140
280
ns
10 V
-
70
140
ns
15 V
-
55
110
ns
5V
-
170
340
ns
10 V
-
75
150
ns
15 V
-
60
120
ns
5V
-
100
200
ns
10 V
-
40
100
ns
15 V
-
35
70
ns
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
7 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
Table 7.
Dynamic characteristics …continued
VSS = 0 V; Tamb = 25 °C unless otherwise specified. For test circuit see Figure 10.
Symbol Parameter
ten
Conditions
VDD
OE to QPn;
see Figure 8
5V
Extrapolation formula
[2]
10 V
15 V
OE to QPn;
see Figure 8
tdis
5V
[2]
10 V
15 V
transition time
tt
pulse width
tW
QS1, QS2;
see Figure 6
5V
set-up time
hold time
th
fclk(max)
[1]
maximum clock
frequency
Typ
Max
Unit
-
100
200
ns
-
55
110
ns
-
50
100
ns
-
80
160
ns
-
40
80
ns
-
30
60
ns
35 ns + (1.00 ns/pF)CL
-
85
170
ns
10 V
19 ns + (0.42 ns/pF)CL
-
40
80
ns
15 V
16 ns + (0.28 ns/pF)CL
-
30
60
ns
CP; LOW and HIGH; 5 V
see Figure 6
10 V
60
30
-
ns
30
15
-
ns
15 V
24
12
-
ns
5V
80
40
-
ns
10 V
60
30
-
ns
15 V
24
12
-
ns
5V
60
30
-
ns
10 V
20
10
-
ns
15 V
15
5
-
ns
STR; HIGH;
see Figure 7
tsu
[1][3]
Min
D to CP;
see Figure 9
D to CP;
see Figure 9
CP; see Figure 6
5V
+5
−15
-
ns
10 V
20
5
-
ns
15 V
20
5
-
ns
5V
5
10
-
MHz
10 V
11
22
-
MHz
15 V
14
28
-
MHz
The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF).
[2]
ten is the same as tPZL and tdis is the same as tPLZ.
[3]
tt is the same as tTLH and tTHL.
Table 8.
Dynamic power dissipation
PD can be calculated from the formulas shown. VSS = 0 V; tr = tf ≤ 20 ns; Tamb = 25 °C.
Symbol Parameter
PD
dynamic power
dissipation
HEF4894B
Product data sheet
VDD
Typical formula
Where
5V
PD = 1200 × fi + Σ(fo × CL) × VDD μW
10 V
PD = 5550 × fi + Σ(fo × CL) × VDD μW
15 V
PD = 15000 × fi + Σ(fo × CL) × VDD2 μW
2
2
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
Σ(fo × CL) = sum of the outputs;
VDD = supply voltage in V.
© NXP B.V. 2010. All rights reserved.
8 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
12. Waveforms
1/fclk(max)
VI
VM
CP input
VSS
tW
tW
tPLZ
tPZL
VDD
VY
QPn output
VX
VOL
tPLH
VOH
tPHL
90 %
VM
QS1 output
VOL
10 %
tTHL
tTLH
tPLH
VOH
tPHL
90 %
VM
QS2 output
10 %
VOL
tTLH
tTHL
001aag222
Parallel output measurement points are given in Table 9.
VOL and VOH are typical output voltage levels that occur with the output load.
Fig 6.
Propagation delay clock (CP) to output (QPn, QS1, QS2), clock pulse width and
maximum clock frequency
Table 9.
Measurement points
Supply
Input
Output
VDD
VM
VM
VX
VY
5 V to 15 V
0.5VDD
0.5VDD
0.1VO
0.9VO
VI
VM
CP input
VSS
VI
STR input
VM
VSS
VDD
tW
tPLZ
tPZL
VY
QPn output
VOL
VX
001aag802
Measurement points are given in Table 9.
VOL is the typical output voltage level that occurs with the output load.
Fig 7.
Strobe (STR) to output (QPn) propagation delays and the strobe pulse width
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
9 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
VI
OE input
VM
VSS
tPLZ
tPZL
VDD
output
LOW to OFF-state
OFF-state to LOW
VOL
VY
VX
outputs
enabled
outputs
disabled
outputs
enabled
001aag803
Measurement points are given in Table 9.
VOL is the typical output voltage level that occurs with the output load.
Fig 8.
Enable and disable times for input OE
VI
CP input
VM
VSS
tsu
tsu
th
th
VI
VM
D input
VSS
VDD
QPn output
VOL
001aag805
Measurement points are given in Table 9.
VOL is a typical output voltage level that occurs with the output load.
The shaded areas indicate when the input is permitted to change for predictable output performance.
Fig 9.
Set-up and hold times for the data input (D)
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
10 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
VI
90 %
input pulse
VSS
10 %
tf
tr
VEXT
VDD
G
VI
VO
RL
DUT
CL
RT
001aag804
Test data is given in Table 10.
Definitions for test circuit:
DUT - Device Under Test;
RL = Load resistance;
CL = load capacitance;
RT = Termination resistance should be equal to output impedance of Zo of the pulse generator;
VEXT = External voltage for measuring switching times.
Fig 10. Test circuit for measuring switching times
Table 10.
Test data
Supply
Input
VDD
VI
tr, tf
tPLZ, tPZL
tPLH, tPHL
CL
RL
5 V to 15 V
VDD
≤ 20 ns
VDD
open
50 pF
1 kΩ
HEF4894B
Product data sheet
VEXT
Load
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
11 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
13. Application information
Application example: serial-to-parallel data converting
LED driver.
VDD
VDD
QP0 QP1
VDD
QP10 QP11
HEF4894B
QS2
D
OE
PWM dimmer
input
STR
CP
VSS
QP0 QP1
VDD
D
OE
STR
QP10 QP11
QS2
HEF4894B
CP
VSS
CONTROL AND
SYNC CIRCUITRY
DATA
CLOCK
from remote
processor
001aag122
Fig 11. Serial-to-parallel converting LED drivers
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
12 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
14. Package outline
DIP20: plastic dual in-line package; 20 leads (300 mil)
SOT146-1
ME
seating plane
D
A2
A
A1
L
c
e
Z
b1
w M
(e 1)
b
MH
11
20
pin 1 index
E
1
10
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
min.
A2
max.
b
b1
c
mm
4.2
0.51
3.2
1.73
1.30
0.53
0.38
0.36
0.23
26.92
26.54
inches
0.17
0.02
0.13
0.068
0.051
0.021
0.015
0.014
0.009
1.060
1.045
D
e
e1
L
ME
MH
w
Z (1)
max.
6.40
6.22
2.54
7.62
3.60
3.05
8.25
7.80
10.0
8.3
0.254
2
0.25
0.24
0.1
0.3
0.14
0.12
0.32
0.31
0.39
0.33
0.01
0.078
(1)
E
(1)
Note
1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.
OUTLINE
VERSION
SOT146-1
REFERENCES
IEC
JEDEC
JEITA
MS-001
SC-603
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-13
Fig 12. Package outline SOT146-1 (DIP20)
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
13 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
SO20: plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
D
E
A
X
c
HE
y
v M A
Z
20
11
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
L
10
1
e
detail X
w M
bp
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
mm
2.65
0.3
0.1
2.45
2.25
0.25
0.49
0.36
0.32
0.23
13.0
12.6
7.6
7.4
1.27
10.65
10.00
1.4
1.1
0.4
1.1
1.0
0.25
0.25
0.1
0.01
0.019 0.013
0.014 0.009
0.51
0.49
0.30
0.29
0.05
0.419
0.043
0.055
0.394
0.016
inches
0.1
0.012 0.096
0.004 0.089
0.043
0.039
0.01
0.01
Z
(1)
0.9
0.4
0.035
0.004
0.016
θ
8o
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT163-1
075E04
MS-013
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Fig 13. Package outline SOT163-1 (SO20)
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
14 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm
SOT360-1
E
D
A
X
c
HE
y
v M A
Z
11
20
Q
A2
(A 3)
A1
pin 1 index
A
θ
Lp
L
1
10
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
1.1
0.15
0.05
0.95
0.80
0.25
0.30
0.19
0.2
0.1
6.6
6.4
4.5
4.3
0.65
6.6
6.2
1
0.75
0.50
0.4
0.3
0.2
0.13
0.1
0.5
0.2
8
o
0
o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT360-1
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
MO-153
Fig 14. Package outline SOT360-1 (TSSOP20)
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
15 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
15. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
HEF4894B v.7
20100813
Product data sheet
-
HEF4894B v.6
Modifications:
•
Section 8 “Limiting values” Added “per output” in the conditions for the power dissipation.
HEF4894B v.6
20100408
Product data sheet
-
HEF4894B v.5
HEF4894B v.5
20091222
Product data sheet
-
HEF4894B v.4
HEF4894B v.4
20080827
Product data sheet
-
HEF4894B_CNV v.3
HEF4894B_CNV v.3
19950101
Product specification
-
HEF4894B_CNV v.2
HEF4894B_CNV v.2
19950101
Product specification
-
-
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
16 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
16. Legal information
16.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. The product is not designed, authorized or warranted to be
HEF4894B
Product data sheet
suitable for use in medical, military, aircraft, space or life support equipment,
nor in applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
17 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
HEF4894B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 13 August 2010
© NXP B.V. 2010. All rights reserved.
18 of 19
HEF4894B
NXP Semiconductors
12-stage shift-and-store register LED driver
18. Contents
1
2
3
4
5
6
6.1
6.2
7
8
9
10
11
12
13
14
15
16
16.1
16.2
16.3
16.4
17
18
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 1
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended operating conditions. . . . . . . . 6
Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Application information. . . . . . . . . . . . . . . . . . 12
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 16
Legal information. . . . . . . . . . . . . . . . . . . . . . . 17
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Contact information. . . . . . . . . . . . . . . . . . . . . 18
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 13 August 2010
Document identifier: HEF4894B
Similar pages