CEL NE681M03-T1-A Necs npn silicon transistor Datasheet

NEC's NPN SILICON TRANSISTOR NE681M03
OUTLINE DIMENSIONS (Units in mm)
FEATURES
•
PACKAGE OUTLINE M03
NEW M03 PACKAGE:
• Smallest transistor outline package available
• Low profile/0.59 mm package height
• Flat lead style for better RF performance
HIGH GAIN BANDWIDTH PRODUCT:
fT = 7 GHz
•
LOW NOISE FIGURE:
NF = 1.4 dB
0.8±0.1
2
1.4 ±0.1
0.45
(0.9)
0.45
TE
•
1.2±0.05
0.3±0.1
3
1
0.2±0.1
DESCRIPTION
NEC's NE681M03 transistor is ideal for low noise, high gain,
and low cost amplifier applications. NEC's new low profile/
flat lead style "M03" package is ideal for today's portable
wireless applications. The NE681 is also available in chip,
Micro-x, and six different low cost plastic surface mount
package styles.
0.59±0.05
+0.1
0.15 -0.05
PIN CONNECTIONS
1. Emitter
2. Base
3. Collector
ELECTRICAL CHARACTERISTICS (TA = 25°C)
PART NUMBER
EIAJ1 REGISTERED NUMBER
PACKAGE OUTLINE
SYMBOLS
NE681M03
2SC5433
M03
PARAMETERS AND CONDITIONS
UNITS
MIN
GHz
4.5
fT
Gain Bandwidth at VCE = 3 V, IC = 7 mA, f = 1 GHz
NF
Noise Figure at VCE = 3 V, IC = 7 mA, f = 1 GHz
dB
Insertion Power Gain at VCE = 3 V, IC = 7 mA, f = 1 GHz
dB
|S21E|2
TYP
7.0
1.4
10
MAX
2.7
12
hFE2
Forward Current Gain at VCE = 3 V, IC = 7 mA
ICBO
Collector Cutoff Current at VCB = 10 V, IE = 0
µA
IEBO
Emitter Cutoff Current at VEB = 1 V, IC = 0
µA
0.8
CRE3
Feedback Capacitance at VCB = 3 V, IE = 0, f = 1 MHz
pF
0.9
80
145
0.8
Notes:
1. Electronic Industrial Association of Japan.
2. Pulsed measurement, pulse width ≤ 350 µs, duty cycle ≤ 2 %.
3. Capacitance is measured with emitter and case connected to the guard terminal at the bridge.
California Eastern Laboratories
NE681M03
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
ORDERING INFORMATION
SYMBOLS
PARAMETERS
UNITS
RATINGS
VCBO
Collector to Base Voltage
V
20
NE681M03-A
VCEO
Collector to Emitter Voltage
V
10
NE681M03-T1-A
VEBO
Emitter to Base Voltage
V
1.5
IC
Collector Current
mA
65
PT
Total Power Dissipation
mW
125
TJ
Junction Temperature
°C
150
TSTG
Storage Temperature
°C
-65 to +150
PART NUMBER
QUANTITY
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
TYPICAL PERFORMANCE CURVES (TA = 25°C)
FORWARD CURRENT GAIN
vs. COLECTOR CURRENT
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
65
500
DC Forward Current Gain, hFE
VCE = 8 V
Collector Current, IC (mA)
55
45
35
25
15
300
200
100
70
50
30
20
5
10
0
2
4
6
8
Collector to Emitter Voltage, VCE (V)
10
1
2
3
5
7
10
20
Collector Current, IC (mA)
30
50
NE681M03
SCHEMATIC
Q1
CCBPKG
CCB
LCX
LBX
Collector
LB
Base
CCE
CCEPKG
LE
LEX
Emitter
BJT NONLINEAR MODEL PARAMETERS (1)
Parameters
Q1
Parameters
Q1
UNITS
Parameter
Units
IS
239.6e-18
MJC
0.223
time
seconds
BF
125
XCJC
0
capacitance
farads
NF
0.9854
CJS
0
inductance
henries
resistance
ohms
VAF
12
VJS
0.75
IKF
0.200
MJS
0
voltage
volts
ISE
1.933e-6
FC
0.5
current
amps
10e-12
NE
50
TF
BR
18.25
XTF
25
NR
0.9771
VTF
0.40
VAR
10
ITF
0.13
IKR
11.81e-3
PTF
43.1
ISC
1.55e-18
TR
0.3e-9
NC
1.860
EG
1.11
RE
0.870
XTB
0
RB
4.0
XTI
3
RBM
5.2
KF
0
IRB
1e-6
AF
1
RC
4.635
CJE
1.2e-12
VJE
0.77
MJE
0.4844
CJC
0.4e-12
VJC
0.5275
(1) Gummel-Poon Model
ADDITIONAL PARAMETERS
Parameters
681M03
CCB
0.07e-12
CCE
0.01e-12
LB
LE
0.3e-9
0.8e-9
CCBPKG
0.08e-12
CCEPKG
0.08e-12
LBX
0.12e-9
LCX
0.10e-9
LEX
0.12e-9
MODEL RANGE
Frequency: 0.1 to 5.0 GHz
Bias:
VCE = 2.5 V to 8 V, IC = 0.3 mA to 20 mA
Date:
12/98
hFE = 124 at VCE = 3 V, IC = 7 mA
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
Internet: http://WWW.CEL.COM
DATA SUBJECT TO CHANGE WITHOUT NOTICE
06/10/2002
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
Similar pages