Vol.10 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Contents Classification of NEC TOKIN's EMI suppression parts 3 SMD Type Inductors 8 SMD Type Large-Current Power Inductors MPC Series 9 Large-Current Power Inductors MPCG Series 13 Large-Current Power Inductors MPLC Series 15 Large-Current Power Inductors C • PI Series 17 Leadless Power Inductors PLC-0735 Series 20 Leadless Power Inductors PLC-0745 Series 23 Leadless Power Inductors PLC-0755 Series 26 Leadless Power Inductors PLC-0760 Series 29 Leadless Power Inductors PLC-1035 Series 32 Leadless Power Inductors PLC-1045 Series 35 Leadless Power Inductors PLC-1055 Series 38 Leadless Power Inductors PLC-1060 Series 41 Leadless Power Inductors PLC-1235 Series 44 Leadless Power Inductors PLC-1245 Series 47 Leadless Power Inductors PLC-1255 Series 50 Leadless Power Inductors P • I Series 53 Leadless Power Inductors P • H Series 55 SN-S3M Series 57 Leadless Power Inductors H • DI-0520 Series 59 Leadless Power Inductors H • DI-0630 Series 61 Leadless Power Inductors H • DI-0740 Series 63 Leadless Power Inductors H • DI-0940 Series 65 Leadless Power Inductors H • DI-1040 Series 67 Leadless Power Inductors H • DI-1240 Series 69 Leadless Power Inductors H • DI-1245G Series 71 Leadless Power Inductors H • DI-1280G Series 73 High Inductance Type SMD Inductors H • LI Series 75 SSB Coils 77 Precautions 82 DIP Type OH Coils 83 SHP Coils 85 SBC Coils 86 SBCP-47HY Coils 92 SBCP-87HY Coils 94 SBCP-80HY Coils 96 SBCP-11HY Coils 98 SBCP-14HY Coils 100 SBPSC Coils 11R310 • 12R817 Series 102 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Classification of NEC TOKIN's EMI suppression parts SMD Type Power Inductors DIP Type Large-Current Power Inductors MPC Series P9 Large-Current Power Inductors MPCG Series P13 Large-Current Power Inductors MPLC Series P15 Large-Current Power Inductors C • PI Series P17 Leadless Power Inductors PLC-0735 Series P20 Leadless Power Inductors PLC-0745 Series P23 Leadless Power Inductors PLC-0755 Series P26 Leadless Power Inductors PLC-0760 Series P29 Leadless Power Inductors PLC-1035 Series P32 Leadless Power Inductors PLC-1045 Series P35 Leadless Power Inductors PLC-1055 Series P38 Leadless Power Inductors PLC-1060 Series P41 Leadless Power Inductors PLC-1235 Series P44 Leadless Power Inductors PLC-1245 Series P47 Leadless Power Inductors PLC-1255 Series P50 Leadless Power Inductors P • I Series P53 Leadless Power Inductors P • H Series P55 SN-S3M Series P57 Leadless Power Inductors H • DI-0520 Series P59 Leadless Power Inductors H • DI-0630 Series P61 Leadless Power Inductors H • DI-0740 Series P63 Leadless Power Inductors H • DI-0940 Series P65 Leadless Power Inductors H • DI-1040 Series P67 Leadless Power Inductors H • DI-1240 Series P69 Leadless Power Inductors H • DI-1245G Series P71 Leadless Power Inductors H • DI-1280G Series P73 High Inductance Type SMD Inductors H • LI Series P75 SSB Coils P77 OH Coils P83 SHP Coils P85 SBC Coils P86 SBCP-47HY Coils P92 SBCP-87HY Coils P94 SBCP-80HY Coils P96 (Continued) Power Inductors VOL.10 3 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Magnetic Shields/ Absorbing Materials EMI Core Sheet Type EMI suppressors P98 SBCP-14HY Coils P100 SBPSC Coils P102 FLEX SUPPRESSOR® Film ImpedorTM Toroidal Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism ESD-R-H Series P6 Snap-on Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism ESD-SR-H Series P7 Toroidal Cores (Bare Type) P8 Toroidal Cores (Coated Type) P12 Toroidal Cores with Case P14 Toroidal Cores with Snail-shaped Case P16 Snap-on Type Snap-on Cores for Round Cables P18 Flat Type Solid / Split Cores for Round Cables P20 Bead Type Bead Cores P28 SH Series P8 SHO Series P10 SBT-03 W Series P11 New Products RingType DIP Type DC Line Filters SBCP-11HY Coils Commom Mode Power Line Commom Mode Signal Line Commom Mode for Telephone Sets Normal Mode SBT-01 W Series P12 Toroidal Cores with Wound Cables P13 DIP Noise Filters D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A P14 DIP Noise Filters D-16C P16 DIP Noise Filters D-37C, 40C, 42C, 45C, 47C P17 DIP Noise Filters D-55C, 58C P19 Noise Filters for Telephone Sets LFT, HFT, SZ-03 P20 Noise Filters for Telephone Sets ST-101, 201, 202, 202S P21 Noise Filters for Telephone Sets ST-101A, 201A, 202A P22 Noise Filters for Telephone Sets ST-110AV, 110AH, 110BV, 110BH P23 Noise Filters for Telephone Sets ST-101F2, 101F4 P24 Noise Filters for Telephone Sets ST-104A4, 204A series P25 SBT Series P26 SNT Series P27 Bead Inductors (Lead Type) P28 Bead Inductors (Winding Type) P31 (Continued) Power Inductors VOL.10 4 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 EMC Filter SMD Type Commom Mode Power Line P33 EJ Series P34 DFD Series P35 SBS9080 Series P37 SBP Series P38 DCM Series P39 EMC Chip Filters M-500CT/M-600T Series P41 SCR Coils High Impedance Type P4 SCR Coils Low Height Type P5 Earth inductors SNG series P6 Common mode SC Coils — Standard Type P8 SC Coils — Case Type SC-E, F, V Type P10 SC Coils — Case Type SC-A Type P12 SC Coils — Terminal Base Type SC-J Type P13 SC Coils — Terminal Base Type SC-GJ Type P15 SC Coils — Terminal Base Type SC-JV Type P16 SC Coils — Terminal Base Type SC-JS Type P17 SC Coils — Terminal Base Type SC-JH Type P18 SC Coils — Small Type SC-G/GS Type P19 SC Coils — Compact, High-Inductance Type, SCF Type P21 SC Coils — High Frequency Type SC-D Type P22 SU Coils SU 7VC Type P23 SU Coils SU 9V/9H Type P24 SU Coils SU 9VF/9HF Type P26 SU Coils SU 10VFC-R Type P27 SU Coils — High Frequency Type SU 9VD Type P28 SU Coils — High Frequency Type SU 10VD Type P29 SU Coils — High Frequency Type SU 16VD Type P30 SS Coils SS11VL Type P31 SS Coils SS11V/H-CH Type P33 SS Coils SSB11V-R/11H-R Type P35 SS Coils SS17 HB Type P36 Commom Mode Signal Line AC Line Filters Feedthrough Capacitor Filters EG Series New Products (Continued) Power Inductors VOL.10 5 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SS Coils SS17VA/HA Type P39 SS Coils SS20H Type P42 SS Coils SS21V Type P44 SS Coils SS24V/H-CH Type P46 SS Coils SS26V Type P48 SS Coils SS28V/H-CH Type P50 SS Coils SSB28V/H Type P52 SS Coils SS30V Type P53 SS Coils SS35V/35H Type P55 SS Coils SS38V Type P56 HHB Coils High μ and Low Core loss Type P59 SN Coils Small and Standard Type P63 SN Coils Terminal Base Type — J Type P66 SN Coils Terminal Base Type — JA Type P67 SN Coils Terminal Base Type — JB Type P68 SN Coils Terminal Base Type — W Type P69 SN Coils Terminal Base Type — P1 Type P70 SN Coils Terminal Base Type — P2 Type P71 High frequency type SHB Coils (Booster Coils for Active Filters) P72 New Products LF-SF Series Plastic Case Three-Phase Noise Filter P8 GT-SF Series Plastic Case Single-Phase Noise Filter P9 LF Series Small Current Type P10 LF Series Small Current Type with Screw Terminal P11 LF Series Screw Terminal Type P13 LF Series Large Current Type P15 LF Series Three-Phase Type P16 LF Series For Inverters P18 LF Series Compliance with CE Marking(LF-3000 Series) P21 LH Series Low-Frequency Inverters P23 LH Series Compliance with CE Marking(LH-4 Series) P25 Normal mode Noise Filters Casing Type Metal box (Continued) Power Inductors VOL.10 6 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Metal cylinder Plastic box Inlet Type HFP Series P26 GT Series Screw Terminal P28 GT Series Faston® Terminal P30 GT Series For VCCI P32 GF Series P33 VU Series P34 VC Series P36 VG-FPZ Series for inverter installed home appliances' surge control P37 RG Series P38 MR Series P40 MA Series P42 GL Series C Type P43 GL Series F,FV,FVP Type P45 GL Series H Type P47 GL Series M Type P49 Power Inductors VOL.10 7 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type SMD Type Inductors Series name Dimensions (mm) Inductance (μH) Rated current (A) MPC Series 8×6.7×4〜5 11.5×10×4 11.7×10×5.5 14.5×12.5×5 0.42〜0.6 0.36〜0.88 0.36、1 0.36〜0.5 17〜22 17〜25.5 18.5〜32 35〜38 HighSpeed/large current DC/DC Converter 9 MPCG Series 8×6.7×4 11.5×10×4 0.42 0.36〜0.45 22 25 HighSpeed/large current DC/DC Converter 13 MPLC Series 7.7×6.7×3 11.5×10×4 1〜4.7 1〜4.7 5〜10.6 8〜14.3 Large-Current Inductors 15 C・PI Series 13.5×14×5.5〜6.5 12.5×13.3×5 10×10.4×5 0.7〜2.7 0.55 0.55〜2.7 13〜26 25 9〜19 DC/DC converters for notebook PCs 17 P ･ I-LM Series 12.7×10.2×6 8.2〜220 0.5〜2.3 P ･ I-LS Series 9.5×7×5 3.3〜47 0.7〜2 P ･ I-ZM Series 12.7×10.2×6 2.7〜330 0.5〜2.9 P ･ I-ZS Series 9.5×7×5 1.2〜8.2 0.6〜3 P ･ H-LM Series 12.7×10.2×6 82〜150 0.7〜1.2 Major features and applications Compact size, high reliability, smoothing inductors for automotives Compact size, high reliability, noise suppression for automotives Page 53 53 53 53 Compact size, high reliability, smoothing inductors for automotives 55 Compact size, noise suppression 57 SN-S3M Series 10×7×4.7 0.8〜23 0.5〜2 PLC 0735 Series 7.5×8×3.5 2〜33 1.6〜5 20 PLC 0745 Series 7.5×8×4.5 2〜33 1.7〜5.1 23 PLC 0755 Series 7.5×8×5.5 2〜33 1.9〜6.4 26 PLC 0760 Series 7.5×8×6 2〜33 1.9〜6.5 29 PLC 1035 Series 10.2×10.7×3.5 2〜33 1.5〜6 PLC 1045 Series 10.2×10.7×4.5 2〜33 2.2〜6.9 PLC 1055 Series 10.2×10.7×5.5 2〜33 2.7〜8.2 38 PLC 1060 Series 10.2×10.7×6 2〜33 2.3〜6.7 41 PLC 1235 Series 12.5×13×3.5 2〜33 1.8〜6.7 44 PLC 1245 Series 12.5×13×4.5 2〜33 2.9〜7.4 47 PLC 1255 Series 12.5×13×5.5 2〜33 3.4〜7.8 50 H ･ DI-0520 Series 5×5×1.8 1.2〜100 0.2〜3.4 59 32 Magnetic shielded type, DC/DC converters 35 H ･ DI-0630 Series 6×5.9×2.8 1.3〜100 0.45〜2.7 61 H ･ DI-0740 Series 7.1×7.1×3.8 1.2〜100 0.5〜4.5 63 H ･ DI-0940 Series 9.5×9.5×4 6.8〜1000 0.28〜3.4 H ･ DI-1040 Series 10.2×10.2×3.8 1.5〜100 1.3〜7.3 67 Magnetic shielded type, DC/DC converters 65 H ･ DI-1240 Series 12.5×12.5×4 2.2〜1000 0.35〜5.1 69 H ･ DI-1245G Series 12.5×12.5×4.5 10〜220 0.85〜4.5 71 H ･ DI-1280G Series 12.5×12.5×8 1.7〜220 1.3〜8.5 H ･ LI-0505 Series 5.7×5.7×5.3 2〜5mH 40〜100mA SSB15 Series 11.6×14×8.5 1〜1000 0.29〜10 SSB14 Series 11.6×14×7 1〜1000 0.23〜7 SSB84 Series 8.3×10×6 1〜1000 0.18〜2.3 SSB64 Series 6.3×8×6 1〜1000 0.14〜1.7 78 SSB44 Series 4.8×6.5×5.5 1〜680 0.1〜1.9 78 73 Magnetic shielded type, compact and high inductance 75 77 77 Standard type, non-shielded type 78 Power Inductors VOL.10 8 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Large-Current Power Inductors MPC Series [RoHS [RoHS Compliant] Compliant] ･ Precautions (see page 82) Inductance （μH） at 100kHz 0.42±20% 0.60±20% 0.36±20% 0.45±20% 0.56±20% 0.88±20% 0.36±20% 1.00±20% 0.36±20% 0.50±20% Model MPC0740LR42C MPC0750LR60C MPC1040LR36C MPC1040LR45C MPC1040LR56C MPC1040LR88C MPC1055LR36C MPC1055L1R0C MPC1250LR36C MPC1250LR50C Rated current（A） DC resistance （mΩ）typ. 1.55±10% 2.30±10% 1.05±10% 1.10±10% 1.30±10% 2.30±10% 0.75±10% 2.30±10% 0.65±10% 0.80±10% Irms ＊1 Isat ＊2 (Ref.) (Ref.) 22.0 17.0 25.5 25.0 23.0 17.0 32.0 18.5 38.0 35.0 20.0 19.0 30.0 27.0 25.0 24.0 35.0 21.0 40.0 40.0 ＊1 T=40K rise at rated current. ＊2 Inductance drop 20% at rated current. ●Operating temperature range: −20〜+120℃ (Include self temperature rise) 8.0 Max 4.0 Max 2.7 3.5 2.7 2.7 3.5 2.7 [Part No] 2.6 6.7±0.3 ●MPC0740LR42C 2.0±0.3 Recommended Land Pattern 2.0±0.3 Shape and Dimensions [Lot No] (1.5) 8.0 Max 5.0 Max [Part No] 2.6 6.7±0.3 ●MPC0750LR60C [Lot No] (0.1) (1.5) 4.0 Max 3.3 5.9 3.3 3.3 5.9 3.3 3.3 5.9 3.3 3.5±0.5 [Part No] [Lot No] 4.1 ●MPC1040LR36C ●MPC1040LR45C ●MPC1040LR56C 10.0±0.3 11.5 Max (2.1) [Part No] [Lot No] 3.6 10.0±0.3 4.0 Max 3.0±0.5 11.5 Max ●MPC1040LR88C (2.1) 5.5 Max 3.5±0.5 11.7 Max [Part No] [Lot No] 4.1 10.0±0.3 ●MPC1055LR36C (2.1) [mm] Power Inductors VOL.10 9 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Recommended Land Pattern 5.5 Max 11.7 Max 3.3 5.9 3.3 10.0±0.3 3.0±0.5 ●MPC1055L1R0C [Part No] [Lot No] 3.6 Shape and Dimensions (2.1) 14.5 Max 5.0 Max 3.4 8.6 3.4 12.5±0.3 3.0±0.5 ●MPC1250LR36C ●MPC1250LR50C 3.6 [Part No] [Lot No] (2.2) [mm] Numbering System MPC - 1040 - LR36C ① Series ② Dimensions 10…W×D：11.5×10 mm ③ Inductance R36…0.36μH 40…H：4.0 mm DC-Superposed Characteristics MPC0750LR60C 80 70 0.7 70 0.6 60 0.5 50 0.4 40 0.3 30 0.2 20 0.1 10 60 0.4 50 40 0.3 30 0.2 20 0.1 Inductance（μH） 0.8 T (deg.C) 10 0 0 5 10 15 20 25 0 0 30 0 0 5 10 Idc（A） 20 25 30 Idc（A） MPC1040LR45C MPC1040LR36C 0.4 80 0.7 80 70 0.6 70 50 0.3 40 0.2 30 T (deg.C) 60 20 Inductance（μH） 0.5 Inductance（μH） 15 60 0.5 50 0.4 40 0.3 30 0.2 T (deg.C) Inductance（μH） 0.5 80 T (deg.C) MPC0740LR42C 0.6 20 0.1 0.1 10 0 5 10 15 20 25 10 0 0 30 0 5 10 1.0 0 30 60 0.5 50 0.4 40 0.3 30 0.2 20 0.1 10 0 15 Idc（A） 20 25 0 30 80 0.9 Inductance（μH） 0.6 70 T (deg.C) Inductance（μH） 80 10 25 MPC1040LR88C 0.7 5 20 Idc（A） Idc（A） MPC1040LR56C 0 15 70 0.8 60 0.7 0.6 50 0.5 40 0.4 30 T (deg.C) 0 0.3 20 0.2 10 0.1 0 0 5 10 15 20 25 0 30 Idc（A） Power Inductors VOL.10 10 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Temperature rise MPC1055LR36C MPC1055L1R0C 1.4 80 70 1.2 70 50 0.3 40 0.2 30 20 60 1.0 50 0.8 40 0.6 30 0.4 T (deg.C) 60 T (deg.C) Inductance（μH） 0.4 80 Inductance（μH） 0.5 20 0.1 0.2 10 0 5 10 15 20 25 30 35 10 0 0 40 0 5 10 15 Idc（A） 0 30 25 Idc（A） MPC1250LR50C MPC1250LR36C 0.4 80 0.7 80 70 0.6 70 50 0.3 40 0.2 30 T (deg.C) 60 20 Inductance（μH） 0.5 Inductance（μH） 20 60 0.5 50 0.4 40 0.3 30 0.2 T (deg.C) 0 20 0.1 0.1 10 0 0 5 10 15 20 25 30 35 10 0 0 40 0 5 10 15 Idc（A） 20 25 30 35 0 40 Idc（A） MPC0740, 0750 Series（1000pcs./reel） Dimensions of indented square hole plastic tape øD0 Ａ B ±0.1 ±0.1 7.0 8.0 W ±0.2 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12.0 P2 ±0.1 2.0 P0 ±0.1 4.0 øD 0 ±0.05 1.55 T ±0.05 0.4 [mm] K ±0.1 5.3 3˚ B W F P2 E P0 T K P1 A Reel dimensions W1 C D B ±1.0 ø80 C ±0.2 ø13.0 D ±0.8 ø21.0 E ±0.5 2.0 r R1.0 W1 ±1.0 17.5 [mm] W2 ±1.0 21.5 A B E Ａ ±2.0 ø330 W2 Power Inductors VOL.10 11 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type MPC1040 Series（500pcs./reel） Dimensions of indented square hole plastic tape øD0 Ａ B ±0.1 ±0.1 10.5 12.1 W ±0.3 24.0 F ±0.1 11.5 E ±0.1 1.75 P1 ±0.1 16.0 P2 ±0.1 2.0 P0 ±0.1 4.0 øD0 ±0.05 1.55 T ±0.05 0.4 [mm] K ±0.1 5.2 3˚ B W F P2 E P0 T K P1 A Reel dimensions Ａ ±5.0 ø330 W1 C D C ±0.5 ø13.5 D ±1.0 ø21.0 E ±0.5 2.0 r [mm] W2 ±3.0 30.4 W1 ±2.0 24.4 R1.0 A B E B ±5.0 ø80 W2 MPC1055 Series（500pcs./reel） Dimensions of indented square hole plastic tape øD0 A ±0.1 10.5 B ±0.1 12.1 W ±0.2 24.0 F ±0.1 11.5 E ±0.1 1.75 P1 ±0.1 24.0 P2 ±0.1 2.0 P0 ±0.1 4.0 øD 0 ±0.05 1.55 T ±0.05 0.4 [mm] K ±0.1 6.0 3˚ B W F P2 E P0 T K P1 A Reel dimensions Ａ ±2.0 ø380 W1 C D C ±0.5 ø13.0 D ±0.8 ø21.0 E ±0.5 2.0 r R1.0 [mm] W2 ±3.0 30.4 W1 ±2.0 24.4 A B E B ±1.0 ø100 W2 MPC1250 Series（500pcs./reel） Dimensions of indented square hole plastic tape øD0 Ａ B ±0.2 ±0.2 13.1 14.6 W ±0.4 24.0 F ±0.2 11.5 E ±0.2 1.75 P1 ±0.2 24.0 P2 ±0.2 2.0 P0 ±0.2 4.0 øD 0 ±0.02 1.5 T ±0.1 0.4 [mm] K ±0.2 5.3 3˚ B W F P2 E P0 T K P1 A Reel dimensions W1 C D B ±5.0 ø100 C ±0.5 ø13.0 D ±0.8 ø21.0 E ±0.5 2.0 r R1.0 W1 ±2.0 25.5 [mm] W2 ±3.0 28.5 A B E Ａ ±2.0 ø380 W2 Power Inductors VOL.10 12 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Large-Current Power Inductors MPCG Series〈Low-Loss Series〉 [RoHS [RoHS Compliant] Compliant] ･ Precautions (see page 82) Inductance （μH） at 100kHz 0.42±20% 0.36±20% 0.45±20% Model MPCG0740LR42 MPCG1040LR36 MPCG1040LR45 Rated current（A） DC resistance （mΩ）typ. 1.55±10% 1.05±10% 1.10±10% Irms ＊1 Isat ＊2 (Ref.) (Ref.) 22.0 25.5 25.0 20.0 30.0 27.0 ＊1 T=40K rise at rated current. ＊2 Inductance drop 20% at rated current. ●Operating temperature range: −20〜+120℃ (Include self temperature rise) Recommended Land Pattern 4.0 Max 8.0 Max ●MPCG0740LR42 6.7±0.3 2.7 2.0±0.3 Shape and Dimensions 3.5 2.7 2.6 [Part No] [Lot No] (1.5) 4.0 Max 3.3 5.9 3.3 3.5±0.5 11.5 Max 10.0±0.3 ●MPCG1040LR36 ●MPCG1040LR45 4.1 [Part No] [Lot No] (2.1) [mm] Numbering System MPCG - 1040 - LR36 ① Series ② Dimensions 10…W×D：11.5×10 mm ③ Inductance R36…0.36μH 40…H：4.0 mm DC-Superposed Characteristics MPCG0740LR42 MPCG1040LR36 80 80 0.5 70 60 0.4 50 40 0.3 30 0.2 20 0.4 60 50 0.3 40 0.2 30 T (deg.C) 0.5 Inductance（μH） 70 T (deg.C) Inductance（μH） 0.6 20 0.1 0.1 10 0 0 5 10 15 Idc（A） 20 25 0 30 10 0 0 5 10 15 20 25 0 30 Idc（A） Power Inductors VOL.10 13 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics 80 0.6 70 60 0.5 50 0.4 40 0.3 30 0.2 T (deg.C) Inductance（μH） MPCG1040LR45 0.7 20 0.1 10 0 0 5 10 15 20 25 0 30 Idc（A） MPCG0740 Series（1000pcs./reel） Dimensions of indented square hole plastic tape øD0 Ａ B ±0.1 ±0.1 7.0 8.0 W ±0.2 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12.0 P2 ±0.1 2.0 P0 ±0.1 4.0 øD 0 ±0.05 1.55 T ±0.05 0.4 [mm] K ±0.1 5.3 3˚ B W F P2 E P0 T K P1 A Reel dimensions Ａ ±2.0 ø330 W1 C D C ±0.2 ø13.0 D ±0.8 ø21.0 E ±0.5 2.0 r [mm] W2 ±1.0 21.5 W1 ±1.0 17.5 R1.0 A B E B ±1.0 ø80 W2 MPCG1040 Series（500pcs./reel） Dimensions of indented square hole plastic tape P2 øD0 E P0 T B W F E P1 P2 P0 [mm] K ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.05 ±0.05 øD0 T ±0.1 10.5 12.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 5.2 3˚ B W F Ａ ±0.1 ±0.1 K P1 A Reel dimensions W1 C D B ±5.0 ø80 C ±0.5 ø13.5 D ±1.0 ø21.0 E ±0.5 2.0 r R1.0 W1 ±2.0 24.4 [mm] W2 ±3.0 30.4 A B E Ａ ±5.0 ø330 W2 Power Inductors VOL.10 14 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Large-Current Power Inductors MPLC Series [RoHS [RoHS Compliant] Compliant] ･ Precautions (see page 82) Inductance at 100kHz, 1mA （μH） 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% Model MPLC0730L1R0 MPLC0730L1R5 MPLC0730L2R2 MPLC0730L3R3 MPLC0730L4R7 MPLC1040L1R0 MPLC1040L1R5 MPLC1040L2R2 MPLC1040L3R3 MPLC1040L4R7 Rated current（A） DC resistance （mΩ）max. 9.0 15.0 19.0 30.0 41.0 5.5 7.0 10.0 14.0 19.0 Irms ＊1 Isat ＊2 (Ref.) (Ref.) 10.6 8.6 7.3 5.7 5.0 14.3 12.4 10.5 8.8 8.0 11.0 8.8 8.2 6.5 5.6 16.2 12.7 11.0 9.3 8.0 ＊1 T=40K rise at rated current. ＊2 Inductance drop 20% at rated current. ●Operating temperature range: −20〜+120℃ (Include self temperature rise) Shape and Dimensions Recommended Land Pattern ●MPLC0730 Series ●MPLC0730 Series 6.7±0.2 3.5 3.2±0.1 7.7 max 3.0 max 2.0 (1.4) ●MPLC1040 Series 3.9 2.0 6.0 3.8 ●MPLC1040 Series 4.0 max 4.6 10.0±0.2 4.0±0.1 11.5 max 3.8 [mm] (2.1) [mm] DC-Superposed Characteristics MPLC1040 Series 5.0 4.5 4.5 4.0 Inductance（μH） Inductance（μH） MPLC0730 Series 5.0 4R7 3.5 3.0 3R3 2.5 2.0 2R2 1.5 1R5 1.0 4.0 4R7 3.5 3.0 3R3 2.5 2.0 2R2 1.5 1R5 1.0 1R0 0.5 1R0 0.5 0.0 0.0 0 5 10 DC.Current（A） 15 0 5 10 15 20 DC.Current（A） Power Inductors VOL.10 15 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type MPLC0730 Series（1000pcs./reel） Dimensions of indented square hole plastic tape F P0 T P2 [mm] T ± 0.05 0.4 E1 W ±0.3 24.0 D0 REEL E1 ±0.1 1.75 P1 ±0.1 16.0 P2 ±0.1 2.0 P0 ±0.1 4.0 øD 0 ±0.05 1.55 W 1R0L Lot No. 3° F ±0.1 11.5 REEL P1 Reel dimensions W2 Ａ D B C ±5.0 B ±0.5 C ±0.8 D ±0.5 A0 r ø380 ø80 ø13.5 ø21.0 2.0 R1.0 W ±0.3 24.0 F ±0.1 11.5 E1 ±0.1 1.75 P1 ±0.1 16.0 Ａ ±2.0 ø330 B ±1.0 ø80 C ±0.5 ø13.5 D ±0.8 ø21.0 W1 [mm] W2 ±0.5 ±0.5 25.5 29.5 A A0 ±5.0 W1 MPLC1040 Series（500pcs./reel） Dimensions of indented square hole plastic tape F P0 T P2 P2 ±0.1 2.0 P0 ±0.1 4.0 øD 0 ±0.05 1.55 1R0L Lot No. W REEL 3° [mm] T ± 0.05 0.4 E1 D0 REEL P1 Reel dimensions D A0 ±0.5 2.0 r R1.0 W1 ±2.0 24.4 [mm] W2 ±3.0 30.4 A C B A0 W2 W1 Power Inductors VOL.10 16 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Large-Current Power Inductors C・PI Series [RoHS [RoHS Compliant] Compliant] ･ Precautions (see page 82) Inductance （μH） at DC 0A, 100kHz 0.55±30% 1.0±30% 1.6±30% 2.2±30% 2.7±30% 0.55±30% 0.7±30% 1.2±30% 0.7±30% 1.2±30% 2.7±30% Model C･PI-1050-0R6S C･PI-1050-1R0S C･PI-1050-1R6S C･PI-1050-2R2S C･PI-1050-2R7S C･PI-1250-0R6S C･PI-1350-0R7S C･PI-1350-1R2S C･PI-1365-0R7S C･PI-1365-1R2S C･PI-1365-3R0S Rated current（A） DC resistance （mΩ）max. 1.7(1.4) 2.9(2.5) 4.0(3.5) 6.3(5.4) 12.6(10.5) 1.2(0.9) 1.5(1.3) 2.5(2.1) 1.3(1.1) 1.7(1.5) 5.7(4.75) Irms ＊1 Isat ＊2 (Ref.) (Ref.) 19.0 16.0 13.0 11.0 9.0 25.0 24.0 19.0 26.0 24.0 13.0 17.0 15.0 13.0 12.0 10.0 26.0 30.0 17.0 30.0 25.0 13.0 ＊1 T=40K rise at rated current. ＊2 Inductance drop 20% at rated current. ●Operating temperature range：−20to＋120℃(Includes self-temperature rise) Shape and Dimensions G H F E C W Model C･PI-1050 Series C･PI-1250 Series C･PI-1350 Series C･PI-1365 Series D T I W 10.4 13.3 14.0 14.0 D 10.0 12.5 13.5 13.5 C 6.0 8.3 8.5 8.5 T 5.0 max. 5.0 max. 5.0 max. 6.5 max. E 1.8 2.4 2.4 2.4 F 1.3 2.2 2.2 2.2 G 2.0 2.4 2.5 2.5 H 1.4 2.4 2.0 2.0 I 6.2 7.8 8.5 8.5 [mm] Recommended Land Pattern J J K J J Model C･PI-1050 Series C･PI-1250 Series C･PI-1350 Series C･PI-1365 Series J 3.5 4.0 4.0 4.0 K 10.1 11.8 12.3 12.3 L 11.5 13.4 15.2 15.2 L [mm] Numbering System C･PI - 1350 - 0R7 ① Series ② Dimensions 13…W×D：14.0×13.5 mm ③ Inductance 0R7…0.7μH 50…H：5.0 mm Power Inductors VOL.10 17 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics 2.4 1.0 20℃ 100℃ 1.6 20℃ 100℃ Inductance（μH） Inductance（μH） 2.0 C･PI-1365-1R2 C･PI-1350-1R2 1.2 C･PI-1365-0R7 0.8 C･PI-1350-0R7 0.8 0.6 0.4 C･PI-1250-0R6 0.2 0.4 0 0 0 5 10 15 25 20 0 30 5 10 Idc（A） 20 25 30 3.5 2.5 20℃ 100℃ 20℃ 3.0 Inductance（μH） 2.0 Inductance（μH） 15 Idc（A） C･PI-1050-2R2 1.5 C･PI-1050-1R6 1.0 C･PI-1050-1R0 100℃ 2.5 C･PI-1050-2R7S 2.0 1.5 1.0 0.5 0.5 C･PI-1050-0R6 0 0 0 5 10 15 20 25 0 2 4 6 Idc（A） 8 10 12 Idc（A） 4 20℃ Inductance（μH） 100℃ 3 2 C･PI-1365-3R0S 1 0 0 5 15 15 20 Idc（A） C・PI-1050 Series（1000pcs./reel） Dimensions of indented square hole plastic tape P0 P2 øD0 E T Ａ B 10 B ±0.2 10.5 W ±0.4 24 ±0.2 ±0.2 ±0.2 ±0.2 +0.2,-0 ±0.1 P0 øD0 T ±0.2 11.5 1.75 16 2.0 4.0 1.5 0.4 5.9 F E P1 P2 [mm] K ±0.2 0.6 4˚ A W F ±0.2 3.2 P1 K Reel dimensions W1 Ａ ±2.0 380 B ±5.0 100 C ±0.5 13 D ±0.8 21 E ±0.5 2.0 r W1 [mm] W2 R1.0 25.5 28.5 A B E C r D W2 Power Inductors VOL.10 18 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type C・PI-1250 Series（500pcs./reel） Dimensions of indented square hole plastic tape P0 øD0 P2 E T B ±0.2 13.3 W ±0.4 24.0 F ±0.2 11.5 E ±0.2 1.75 P1 ±0.2 24.0 P2 ±0.2 2.0 P0 T øD0 ±0.2 +0.2,-0 ±0.1 0.4 4.0 1.5 [mm] K ±0.2 5.4 4.3 1.4 W A 4° F Ａ ±0.2 13.3 4.5 4.5 B K Drawer direction P1 Reel dimensions Ａ ±2.0 380 W1 E C ±0.5 13.0 D ±0.8 21.0 E ±0.5 2.0 r W1 [mm] W2 R1.0 25.5 28.5 A B C B ±5.0 100 r D W2 C・PI-13・ ・ Series（500pcs./reel） Dimensions of indented square hole plastic tape P0 P2 øD0 E T W ±0.4 24.0 F ±0.2 11.5 E ±0.2 1.75 P1 ±0.2 24.0 P2 ±0.2 2.0 øD0 P0 T ±0.2 +0.2,-0 ±0.1 4.0 1.5 0.4 [mm] K ±0.2 6.8 W B F Ａ B ±0.2 ±0.2 14.65 14.1 4.6 4.6 4.6 A P1 K Reel dimensions W1 B ±5.0 100 C ±0.5 13 D ±0.8 21 E ±0.5 2.0 r W1 [mm] W2 R1.0 25.5 28.5 A B E C Ａ ±2.0 380 r D W2 Power Inductors VOL.10 19 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-0735 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-0735-2R0S PLC-0735-3R3S PLC-0735-4R7S PLC-0735-5R6S PLC-0735-6R8S PLC-0735-8R2S PLC-0735-100S PLC-0735-120S PLC-0735-150S PLC-0735-180S PLC-0735-220S PLC-0735-330S Rated current（A） DC resistance RDC（mΩ）max. Irms ＊1 24 28 44 50 62 77 84 101 108 120 164 220 5.0 4.7 3.5 3.3 3.2 2.7 2.6 2.2 2.1 1.9 1.7 1.6 ＊2 Isat（Ref.） at 20℃ at 100℃ 7.3 6.7 6.0 5.1 4.4 4.1 3.8 3.6 3.3 2.8 2.4 2.2 6.3 4.0 3.9 3.8 3.5 3.0 2.8 2.7 2.5 2.1 1.8 1.6 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 3.5 MAX 8.0±0.5 2.0±0.2 7.5±0.5 Dot mark Lot No. Inductance 1.0±0.3 (5.5) 1.0±0.3 [mm] 2.3 Recommended Land Pattern 1.6 5.5 1.6 [mm] Power Inductors VOL.10 20 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0735-2R0S PLC-0735-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） PLC-0735-4R7S 6 7 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0735-6R8S PLC-0735-8R2S 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 9 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0735-100S PLC-0735-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 8 9 Inductance（μH） Inductance（μH） 5 PLC-0735-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 DC.Current（A） 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 DC.Current（A） Power Inductors VOL.10 21 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0735-150S PLC-0735-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-0735-220S 5 PLC-0735-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-0735 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 0735 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 3.8 K P1 [mm] Drawer direction 0735 Series pcs./reel 1000 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 22 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-0745 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-0745-2R0S PLC-0745-3R3S PLC-0745-4R7S PLC-0745-5R6S PLC-0745-6R8S PLC-0745-8R2S PLC-0745-100S PLC-0745-120S PLC-0745-150S PLC-0745-180S PLC-0745-220S PLC-0745-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 19 22 34 38 40 70 80 90 107 113 135 200 5.1 4.8 4.0 3.8 3.6 2.8 2.6 2.4 2.2 2.1 1.9 1.7 7.0 5.9 5.0 4.9 4.4 3.8 3.3 3.2 2.8 2.6 2.3 1.9 6.2 3.8 3.7 3.6 3.1 2.7 2.4 2.3 2.0 1.9 1.7 1.3 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 4.5 MAX 8.0±0.5 2.0±0.2 7.5±0.5 Dot mark Lot No. Inductance 1.0±0.3 (5.5) 1.0±0.3 [mm] 2.3 Recommended Land Pattern 1.6 5.5 1.6 [mm] Power Inductors VOL.10 23 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0745-2R0S PLC-0745-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 5 6 7 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0745-6R8S PLC-0745-8R2S 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 9 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0745-100S PLC-0745-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 8 PLC-0745-5R6S 10 Inductance（μH） Inductance（μH） PLC-0745-4R7S Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 DC.Current（A） 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 DC.Current（A） Power Inductors VOL.10 24 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0745-150S PLC-0745-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-0745-220S 5 PLC-0745-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-0745 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 0745 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 4.8 K P1 [mm] Drawer direction 0745 Series pcs./reel 1000 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 25 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-0755 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-0755-2R0S PLC-0755-3R3S PLC-0755-4R7S PLC-0755-5R6S PLC-0755-6R8S PLC-0755-8R2S PLC-0755-100S PLC-0755-120S PLC-0755-150S PLC-0755-180S PLC-0755-220S PLC-0755-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 15 20 24 26 34 37 40 55 67 80 125 166 6.4 5.6 5.1 4.8 4.6 4.1 3.9 3.4 2.8 2.4 2.2 1.9 7.2 6.2 5.2 5.0 4.4 4.0 3.7 3.3 3.2 2.7 2.4 1.9 6.4 3.9 3.8 3.6 3.4 3.0 2.7 2.5 2.4 2.0 1.8 1.4 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 5.5 MAX 8.0±0.5 2.0±0.2 7.5±0.5 Dot mark Lot No. Inductance 1.0±0.3 (5.5) 1.0±0.3 [mm] 2.3 Recommended Land Pattern 1.6 5.5 1.6 [mm] Power Inductors VOL.10 26 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0755-2R0S PLC-0755-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） PLC-0755-4R7S 6 7 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0755-6R8S PLC-0755-8R2S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0755-100S PLC-0755-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 8 9 Inductance（μH） Inductance（μH） 5 PLC-0755-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 DC.Current（A） 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 DC.Current（A） Power Inductors VOL.10 27 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0755-150S PLC-0755-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-0755-220S 5 PLC-0755-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-0755 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 0755 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 5.8 K P1 [mm] Drawer direction 0755 Series pcs./reel 800 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 28 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-0760 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-0760-2R0S PLC-0760-3R3S PLC-0760-4R7S PLC-0760-5R6S PLC-0760-6R8S PLC-0760-8R2S PLC-0760-100S PLC-0760-120S PLC-0760-150S PLC-0760-180S PLC-0760-220S PLC-0760-330S DC resistance RDC（mΩ）max. Irms ＊1 14 18 21 23 31 34 37 42 57 64 71 130 Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ 6.5 5.8 5.2 4.9 4.7 4.4 4.1 3.6 3.1 2.9 2.7 1.9 7.0 5.4 4.6 4.1 3.9 3.5 3.2 2.9 2.5 2.4 2.2 1.8 5.3 4.1 3.5 3.1 3.0 2.5 2.4 2.1 1.8 1.7 1.6 1.3 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 6.0 MAX 8.0±0.5 2.0±0.2 7.5±0.5 Dot mark Lot No. Inductance 1.0±0.3 (5.5) 1.0±0.3 [mm] 2.3 Recommended Land Pattern 1.6 5.5 1.6 [mm] Power Inductors VOL.10 29 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0760-2R0S PLC-0760-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） PLC-0760-4R7S 6 7 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0760-6R8S PLC-0760-8R2S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-0760-100S PLC-0760-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 8 10 9 Inductance（μH） Inductance（μH） 5 PLC-0760-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 DC.Current（A） 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 DC.Current（A） Power Inductors VOL.10 30 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-0760-150S PLC-0760-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-0760-220S 5 PLC-0760-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-0760 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 0760 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 6.3 K P1 [mm] Drawer direction 0760 Series pcs./reel 800 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 31 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1035 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1035-2R0S PLC-1035-3R3S PLC-1035-4R7S PLC-1035-5R6S PLC-1035-6R8S PLC-1035-8R2S PLC-1035-100S PLC-1035-120S PLC-1035-150S PLC-1035-180S PLC-1035-220S PLC-1035-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 25 28 38 44 52 60 75 115 120 138 165 238 6.0 5.7 5.2 4.7 4.2 3.7 3.4 2.4 2.2 2.1 2.0 1.5 11.4 9.5 8.7 7.9 6.6 6.3 6.0 5.7 4.8 4.4 4.2 3.0 8.1 6.9 6.3 5.8 4.7 4.4 4.1 4.0 3.4 3.3 3.0 2.2 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 3.5 MAX 10.7±0.5 3.0±0.2 10.2±0.5 Dot mark Lot No. Inductance 2.0±0.3 (5.6) 2.0±0.3 [mm] 3.3 Recommended Land Pattern 2.5 5.6 2.5 [mm] Power Inductors VOL.10 32 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1035-2R0S PLC-1035-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 DC.Current（A） PLC-1035-4R7S 6 7 8 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1035-6R8S PLC-1035-8R2S 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 9 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1035-100S PLC-1035-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 9 9 Inductance（μH） Inductance（μH） 5 PLC-1035-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 33 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1035-150S PLC-1035-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-1035-220S 5 PLC-1035-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-1035 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1035 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 3.8 K P1 [mm] Drawer direction 1035 Series pcs./reel 1000 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 34 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1045 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1045-2R0S PLC-1045-3R3S PLC-1045-4R7S PLC-1045-5R6S PLC-1045-6R8S PLC-1045-8R2S PLC-1045-100S PLC-1045-120S PLC-1045-150S PLC-1045-180S PLC-1045-220S PLC-1045-330S DC resistance RDC（mΩ）max. Irms ＊1 16 21 23 25 28 36 41 50 65 70 95 165 6.9 6.1 5.5 5.1 4.7 4.0 3.6 3.4 3.2 3.0 2.9 2.2 Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ 10.6 8.5 6.3 5.9 5.6 5.2 4.9 4.7 4.1 3.4 3.3 2.7 7.6 6.6 4.8 4.4 4.3 4.2 3.9 3.6 3.1 2.7 2.4 2.0 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 4.5 MAX 10.7±0.5 3.0±0.2 10.2±0.5 Dot mark Lot No. Inductance 2.0±0.3 (5.6) 2.0±0.3 [mm] 3.3 Recommended Land Pattern 2.5 5.6 2.5 [mm] Power Inductors VOL.10 35 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1045-2R0S PLC-1045-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 DC.Current（A） PLC-1045-4R7S 6 7 8 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1045-6R8S PLC-1045-8R2S 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） 9 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1045-100S PLC-1045-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 9 9 Inductance（μH） Inductance（μH） 5 PLC-1045-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 36 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1045-150S PLC-1045-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 PLC-1045-220S 5 PLC-1045-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 4.5 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-1045 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1045 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 4.8 K P1 [mm] Drawer direction 1045 Series pcs./reel 1000 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 37 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1055 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1055-2R0S PLC-1055-3R3S PLC-1055-4R7S PLC-1055-5R6S PLC-1055-6R8S PLC-1055-8R2S PLC-1055-100S PLC-1055-120S PLC-1055-150S PLC-1055-180S PLC-1055-220S PLC-1055-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 13 18 21 24 26 33 43 46 50 54 62 110 8.2 7.2 5.8 5.7 5.1 4.7 4.0 3.8 3.5 3.4 3.3 2.7 13.6 9.6 8.7 8.3 8.2 7.4 6.7 5.8 4.9 4.5 4.2 3.1 11.0 7.0 6.6 6.5 6.1 5.5 4.9 4.2 3.5 3.4 3.1 2.3 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 5.5 MAX 10.7±0.5 3.0±0.2 10.2±0.5 Dot mark Lot No. Inductance 2.0±0.3 (5.6) 2.0±0.3 [mm] 3.3 Recommended Land Pattern 2.5 5.6 2.5 [mm] Power Inductors VOL.10 38 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1055-2R0S PLC-1055-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 2 4 6 8 10 12 14 0 1 2 3 DC.Current（A） PLC-1055-4R7S 6 7 8 10 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 4 5 6 7 8 9 10 DC.Current（A） PLC-1055-6R8S PLC-1055-8R2S 10 10 20℃ 9 8 100℃ 8 Inductance（μH） 9 7 6 5 4 3 7 6 5 4 3 2 2 1 1 20℃ 100℃ 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1055-100S PLC-1055-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 9 9 Inductance（μH） Inductance（μH） 5 PLC-1055-5R6S 10 Inductance（μH） 4 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 39 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1055-150S PLC-1055-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 4.5 5 DC.Current（A） PLC-1055-220S PLC-1055-330S 40 40 20℃ 35 35 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 20℃ 100℃ 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-1055 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1055 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 5.8 K P1 [mm] Drawer direction 1055 Series pcs./reel 800 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 40 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1060 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1060-2R0S PLC-1060-3R3S PLC-1060-4R7S PLC-1060-5R6S PLC-1060-6R8S PLC-1060-8R2S PLC-1060-100S PLC-1060-120S PLC-1060-150S PLC-1060-180S PLC-1060-220S PLC-1060-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 16 19 22 24 27 34 43 47 51 58 65 96 6.7 6.2 5.7 5.5 4.8 4.6 3.9 3.7 3.5 3.3 3.0 2.3 15.7 11.2 8.8 8.4 8.3 7.5 7.0 5.9 5.4 4.9 4.7 3.9 11.9 8.0 6.7 6.6 6.2 5.6 5.1 4.6 4.2 3.7 3.5 2.9 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 6.0 MAX 10.7±0.5 3.0±0.2 10.2±0.5 Dot mark Lot No. Inductance 2.0±0.3 (5.6) 2.0±0.3 [mm] 3.2 Recommended Land Pattern 2.5 5.6 2.5 [mm] Power Inductors VOL.10 41 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1060-2R0S PLC-1060-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 2 4 6 8 10 12 14 16 0 1 2 3 4 DC.Current（A） PLC-1060-4R7S 7 8 9 11 12 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 4 5 6 7 8 9 10 DC.Current（A） PLC-1060-6R8S PLC-1060-8R2S 10 10 20℃ 9 8 100℃ 8 Inductance（μH） 9 7 6 5 4 3 7 6 5 4 3 2 2 1 1 20℃ 100℃ 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1060-100S PLC-1060-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 10 9 Inductance（μH） Inductance（μH） 6 PLC-1060-5R6S 10 Inductance（μH） 5 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 42 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1060-150S PLC-1060-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 1 2 3 4 5 6 7 0 8 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 4.5 5 DC.Current（A） PLC-1060-220S PLC-1060-330S 40 40 20℃ 35 35 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 20℃ 100℃ 0 0.5 1 1.5 DC.Current（A） 2 2.5 3 3.5 4 4.5 5 DC.Current（A） PLC-1060 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1060 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 6.3 K P1 [mm] Drawer direction 1060 Series pcs./reel 800 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 43 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1235 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1235-2R0S PLC-1235-3R3S PLC-1235-4R7S PLC-1235-5R6S PLC-1235-6R8S PLC-1235-8R2S PLC-1235-100S PLC-1235-120S PLC-1235-150S PLC-1235-180S PLC-1235-220S PLC-1235-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 15 19 27 35 39 53 58 65 77 120 140 170 6.7 6.0 5.4 4.5 4.3 3.6 3.5 3.2 3.1 2.2 2.1 1.8 12.3 9.6 8.5 7.7 6.7 6.2 6.0 5.9 5.4 4.8 4.3 3.3 9.1 7.1 6.5 6.0 5.1 4.6 4.5 4.4 4.0 3.3 3.0 2.5 ＊1 T= 40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 3.5 MAX 13.0±0.5 3.0±0.2 12.5±0.5 Dot mark Lot No. Inductance 2.0±0.3 (8.6) 2.0±0.3 [mm] 3.2 Recommended Land Pattern 2.5 8.6 2.5 [mm] Power Inductors VOL.10 44 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1235-2R0S PLC-1235-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 0 0 2 4 6 8 10 12 14 0 1 2 3 4 DC.Current（A） PLC-1235-4R7S 7 8 9 11 12 10 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 4 5 6 7 8 9 10 DC.Current（A） PLC-1235-6R8S PLC-1235-8R2S 10 10 20℃ 9 8 100℃ 8 Inductance（μH） 9 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 20℃ 100℃ 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1235-100S PLC-1235-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 10 9 Inductance（μH） Inductance（μH） 6 PLC-1235-5R6S 10 Inductance（μH） 5 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 45 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1235-150S PLC-1235-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 PLC-1235-220S 8 PLC-1235-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 7 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-1235 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1235 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 3.8 K P1 [mm] Drawer direction 1235 Series pcs./reel 700 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 46 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1245 Series [RoHS [RoHS Compliant] Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1245-2R0S PLC-1245-3R3S PLC-1245-4R7S PLC-1245-5R6S PLC-1245-6R8S PLC-1245-8R2S PLC-1245-100S PLC-1245-120S PLC-1245-150S PLC-1245-180S PLC-1245-220S PLC-1245-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 13 16 22 25 29 31 38 42 47 49 66 80 7.4 6.7 6.2 6.1 5.3 5.0 4.7 4.0 3.7 3.5 3.2 2.9 12.4 9.7 8.7 8.2 7.2 6.9 6.3 6.0 5.5 5.1 4.4 3.4 9.2 7.2 6.8 6.1 5.3 5.2 4.5 4.4 4.1 3.4 3.1 2.6 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 4.5 MAX 13.0±0.5 3.0±0.2 12.5±0.5 Dot mark Lot No. Inductance 2.0±0.3 (8.6) 2.0±0.3 [mm] 3.2 Recommended Land Pattern 2.5 8.6 2.5 [mm] Power Inductors VOL.10 47 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1245-2R0S PLC-1245-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 2 4 6 8 10 12 14 0 1 2 3 4 DC.Current（A） 6 7 8 9 11 12 PLC-1245-5R6S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 4 5 6 7 8 9 10 DC.Current（A） PLC-1245-6R8S PLC-1245-8R2S 10 10 20℃ 9 8 100℃ 8 Inductance（μH） 9 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 20℃ 100℃ 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1245-100S PLC-1245-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 10 10 Inductance（μH） Inductance（μH） PLC-1245-4R7S Inductance（μH） 5 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 48 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1245-150S PLC-1245-180S 40 40 20℃ 35 20℃ 35 100℃ 30 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 25 20 15 10 5 5 0 0 0 1 2 3 4 5 6 7 8 0 1 2 DC.Current（A） 3 4 5 6 PLC-1245-220S 8 PLC-1245-330S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 30 Inductance（μH） Inductance（μH） 7 DC.Current（A） 25 20 15 10 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 DC.Current（A） PLC-1245 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1245 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 4.8 K P1 [mm] Drawer direction 1245 Series pcs./reel 700 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 49 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors PLC-1255 Series [RoHS Compliant] Inductance at 100kHz, 1mA （μH） 2.0± 30% 3.3± 30% 4.7± 30% 5.6± 30% 6.8± 30% 8.2± 30% 10.0± 20% 12.0± 20% 15.0± 20% 18.0± 20% 22.0± 20% 33.0± 20% Model PLC-1255-2R0S PLC-1255-3R3S PLC-1255-4R7S PLC-1255-5R6S PLC-1255-6R8S PLC-1255-8R2S PLC-1255-100S PLC-1255-120S PLC-1255-150S PLC-1255-180S PLC-1255-220S PLC-1255-330S Rated current（A） ＊2 Isat（Ref.） at 20℃ at 100℃ DC resistance RDC（mΩ）max. Irms ＊1 12 13 15 17 19 24 25 27 38 44 47 70 7.8 7.5 7.4 7.2 6.8 6.1 5.8 5.2 4.4 4.2 3.9 3.4 13.3 10.4 9.5 9.1 8.4 7.3 6.6 6.3 5.8 5.7 4.6 4.0 9.6 7.5 7.3 6.8 6.0 5.4 4.6 4.5 4.2 4.1 3.4 2.9 ＊1 T=40K rise at rated current. ＊2 Inductance drop 30% at rated current. ●Operating temperature range：−20to+120℃(Including self-temperature rise) Shape and Dimensions 5.5 MAX 13.0±0.5 3.0±0.2 12.5±0.5 Dot mark Lot No. Inductance 2.0±0.3 (8.6) 2.0±0.3 [mm] 3.2 Recommended Land Pattern 2.5 8.6 2.5 [mm] Power Inductors VOL.10 50 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1255-2R0S PLC-1255-3R3S 10 9 20℃ 9 20℃ 8 100℃ 8 100℃ Inductance（μH） Inductance（μH） 10 7 6 5 4 3 2 7 6 5 4 3 2 1 1 0 0 0 2 4 6 8 10 12 14 0 1 2 3 4 DC.Current（A） PLC-1255-4R7S 7 8 9 11 9 20℃ 9 20℃ 8 100℃ 8 100℃ 7 6 5 4 3 2 12 7 6 5 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 DC.Current（A） 4 5 6 7 8 9 10 DC.Current（A） PLC-1255-6R8S PLC-1255-8R2S 10 10 20℃ 9 8 100℃ 8 Inductance（μH） 9 7 6 5 4 3 7 6 5 4 3 2 2 20℃ 1 1 100℃ 0 0 0 1 2 3 4 5 6 7 8 9 10 0 1 2 DC.Current（A） 3 4 5 6 7 8 DC.Current（A） PLC-1255-100S PLC-1255-120S 40 40 20℃ 35 20℃ 35 100℃ 100℃ 30 Inductance（μH） Inductance（μH） 10 10 Inductance（μH） Inductance（μH） 6 PLC-1255-5R6S 10 Inductance（μH） 5 DC.Current（A） 25 20 15 10 5 30 25 20 15 10 5 0 0 0 1 2 3 4 5 DC.Current（A） 6 7 8 0 1 2 3 4 5 6 7 8 DC.Current（A） Power Inductors VOL.10 51 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics PLC-1255-150S PLC-1255-180S 40 40 20℃ 35 20℃ 35 100℃ Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 30 25 20 15 10 5 5 0 0 0 1 2 3 4 5 6 7 8 0 1 2 3 DC.Current（A） 4 5 6 7 8 DC.Current（A） PLC-1255-220S PLC-1255-330S 40 40 20℃ 35 35 Inductance（μH） Inductance（μH） 100℃ 30 25 20 15 10 30 25 20 15 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 20℃ 100℃ 0 0.5 1 DC.Current（A） 1.5 2 2.5 3 3.5 4 4.5 5 DC.Current（A） PLC-1255 Series [mm] Dimensions of indented square hole plastic tape P2 øD0 E P0 T W F 1255 Series W F E P1 P2 P0 øD0 T K ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.05 ± 0.05 ± 0.1 24.0 11.5 1.75 16.0 2.0 4.0 1.55 0.4 5.8 K P1 [mm] Drawer direction 1255 Series pcs./reel 700 Reel dimensions E W1 C Zoom A [mm] B D r A ±5 380 B ±5 80 C ± 0.5 13.5 D ± 0.8 21.0 E ± 0.5 2.0 r R1.0 W1 ± 0.5 25.5 W2 ± 0.5 29.5 W2 Power Inductors VOL.10 52 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors P･I Series 〈Applicable for Automotives〉 ･ Precautions (see page 82) ●P・I Series Type Choke coil （975） Choke coil （12106） Noise suppressor （975） Noise suppressor （12106） Model Inductance （μH）at 100kHz P・I-470LSF P・I-220LSF P・I-120LSF P・I-5R6LSF P・I-3R3LSF P・I-221LMF P・I-151LMF P・I-121LMF P・I-680LMF P・I-330LMF P・I-180LMF P・I-8R2LMF P・I-820ZSF P・I-470ZSF P・I-390ZSF P・I-180ZSF P・I-100ZSF P・I-4R7ZSF P・I-1R2ZSF P・I-331ZMF P・I-181ZMF P・I-121ZMF P・I-560ZMF P・I-270ZMF P・I-150ZMF P・I-2R7ZMF 47±25% 22±25% 12±25% 5.6±30% 3.3±30% 220±25% 150±25% 125±25% 68±25% 33±25% 18±25% 8.2±30% 82±25% 47±25% 39±25% 18±25% 10±25% 4.7±30% 1.2±30% 330±25% 180±25% 120±25% 56±25% 27±25% 15±25% 2.7±30% Rated current （A） DC resistance （Ω）max. 0.7 0.9 1.0 1.6 2.0 0.5 0.6 0.8 0.8 1.0 1.7 2.3 0.6 0.7 0.8 1.0 1.5 2.0 3.0 0.5 0.6 0.8 1.0 1.7 2.2 2.9 0.46 0.30 0.20 0.10 0.08 1.25 0.95 0.60 0.45 0.30 0.15 0.10 0.48 0.30 0.31 0.20 0.12 0.08 0.05 1.40 0.85 0.48 0.35 0.15 0.10 0.07 ●Operating temperature range: −40 to +120℃ (Including self-temperature rise) 4.0±0.2 ●M Type 7.0±0.3 3.0±0.2 ●S Type 5.0 max 9.5±0.4 12.7±0.4 (0.9) 10.2±0.3 Shape and Dimensions 6.0 max (0.9) (1.2) (1.2) [mm] Recommended Land Pattern b a c b Type S M a 5.0 6.0 b 5.0 5.0 c 6.0 9.0 [mm] Power Inductors VOL.10 53 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Numbering System P･I - ① ② ③ ④ ⑤ Series Inductance 120：12μH、121：120μH、4R7：4.7μH Type L : Choke Coils, Z : Noise suppressor Dimensions NEC TOKIN control number DC-Superposed Characteristics P・I-LMF Type P・I-LSF Type 200 100 100 P・I-470LSF 50 Inductance (H) Inductance (H) 200 P・I-220LSF P・I-120LSF 10 1 10 100 1000 P・I-121LMF P・I-680LMF 50 P・I-330LMF P・I-180LMF 10 1 10 10000 100 1000 10000 1000 10000 Idc (mA) Idc (mA) P・I-ZSF Type P・I-ZMF Type 200 200 P・I-121ZMF P・I-820ZSF 100 50 P・I-470ZSF 50 P・I-560ZMF Inductance (H) Inductance (H) 100 P・I-390ZSF P・I-180ZSF P・I-100ZSF 10 P・I-4R7ZSF 1 10 100 1000 P・I-270ZMF 10 1 10 10000 100 Idc (mA) Idc (mA) P･I-S Series（1000pcs./reel） Dimensions of indented square hole plastic tape P0 P2 øD0 [mm] F A ± 0.2 8.2 B ± 0.1 10.05 W ± 0.3 16 F ± 0.1 7.5 E ± 0.1 1.75 P1 ± 0.1 12 P2 ± 0.1 2.0 P0 ± 0.1 4.0 øD0 ± 0.05 1.55 T1 ± 0.1 4.7 T2 ± 0.05 0.38 B W E T2 A P1 T1 Reel dimensions [mm] W1 B ± 5.0 80 C ± 0.5 13 D ± 0.8 21 E ± 0.5 2.0 r W1 W2 R1.0 16 25 A B E C A ± 2.0 330 r D W2 Power Inductors VOL.10 54 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors P･H Series ･ Precautions (see page 82) ●P・H Series Inductance （μH）at 100kHz Type Model Choke coil （975） P・H-121LSF P・H-111LSF P・H-151LMF P・H-121LMF P・H-900LMF P・H-820LMF Choke coil （12106） DC resistance （Ω）max. Rated current （A） 0.80 0.60 0.55 0.45 0.40 0.34 0.5 0.7 0.7 0.9 1.0 1.2 120±25% 110±30% 150±25% 120±25% 90±25% 82±25% ●Storage temperature range: −40 to +105℃ Shape and Dimensions Recommended Land Pattern ●S Type ●M Type 4.0±0.2 5.0 max 9.5±0.4 c b a 6.0 max 12.7±0.4 (0.9) 10.2±0.3 7.0±0.3 3.0±0.2 b a 6.0 (0.9) (1.2) (1.2) b 5.0 [mm] c 9.0 [mm] Numbering System P･H - ① ② ③ ④ ⑤ Series Inductance 121：120μH Type L : Choke Coil Dimensions NEC TOKIN control number DC-Superposed Characteristics P・H-LSF Type P・H-LMF Type 200 200 PH-151LMF PH-121LSF 100 PH-111LSF 50 Inductance (H) Inductance (H) 100 10 1 10 100 1000 Idc (mA) 10000 50 PH-121LMF PH-900LMF 10 1 10 100 1000 10000 Idc (mA) Power Inductors VOL.10 55 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type P･I-M/P･H-LM Series（700pcs./reel） Dimensions of indented square hole plastic tape P0 P2 øD0 [mm] F A ± 0.1 10.7 B ± 0.1 13.3 W ± 0.3 24 F ± 0.1 11.5 E ± 0.1 1.75 P1 ± 0.1 16 P2 ± 0.1 2.0 P0 ± 0.1 4.0 øD0 ± 0.05 1.55 T1 ± 0.1 6.0 T2 ± 0.05 0.4 B W E T2 A P1 T1 Reel dimensions [mm] W1 A ±2.0 330 B ±5.0 80 C ±0.5 13 D ±0.8 21 E ±0.5 2.0 r W1 W2 R1.0 24.4 30.4 A B E C r D W2 Power Inductors VOL.10 56 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type SN-S3M Series [RoHS [RoHS Compliant] Compliant] ･ Precautions (see page 82) Model Rated current （A） Inductance （μH） DC resistance （mΩ）max. SN-S3M-0523T SN-S3M-1010T SN-S3M-1006AT SN-S3M-2005T SN-S3M-20R8T 0.5 1.0 1.0 2.0 2.0 23.0 min. 10± 20% 6.0 min. 5.0 min. 0.8 min. 350 80 80 40 20 Shape and Dimensions Operation temperature range （℃） −20~+85 −20~+85 −20~+85 −20~+85 −20~+85 Packaging Taping (1000 pcs./ reel) Recommended Land Pattern R1.0 5.0 0.5 max. Lot No. 6.0 4.7 max. 7.0±0.2 2.0 max. Spec. 14~16 0.5 max. 9.0±0.2 3.0±0.2 [mm] [mm] Impedance vs. Frequency Impedance () 5K 1K 0523 500 1010 1006A 2005 100 20R8 50 10 1 5 10 50 100 500 Frequency (MHz) Power Inductors VOL.10 57 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type SN-S3M Series（In contormity to EIAJ RC-1009）（1000pcs./reel） Dimensions of indented square hole plastic tape T1 Sprocket hold Indented Square hole for fitting chips øD0 F [mm] A ± 0.3 7.4 B ± 0.3 10.5 W ± 0.3 16 F ± 0.1 7.5 E ± 0.1 1.75 P1 ± 0.1 12 P2 ± 0.1 2.0 P0 D0 T1 ± 0.1 +0.1, –0 max. 4.0 1.5 0.6 T2 max. 6.5 K max. 6.4 B W E K P1 A T2 P2 P0 Forward direction Indented Square hole for fitting chips Reel dimensions W1 [mm] A — ø330 B — ø80 C ±0.5 ø13 D ±1.0 ø21 E ±0.5 2.0 r — 0 W1 +2.0–0 12.4 W2 ±0.5 1.5 B E C D r A W2 Power Inductors VOL.10 58 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-0520 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-0520 Series Inductance at 100kHz,1mA （μH） 1.2± 30% 2.2± 30% 3.3± 30% 4.7± 30% 6.8± 30% 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 20% 100± 20% Model H・DI-0520-1R2 H・DI-0520-2R2 H・DI-0520-3R3 H・DI-0520-4R7 H・DI-0520-6R8 H・DI-0520-100 H・DI-0520-150 H・DI-0520-220 H・DI-0520-330 H・DI-0520-470 H・DI-0520-680 H・DI-0520-101 DC resistance （Ω）max. Rated current （A） 0.035 0.048 0.062 0.09 0.14 0.16 0.26 0.32 0.54 0.64 1.07 1.87 3.40 2.60 2.00 1.80 1.40 0.90 0.70 0.60 0.40 0.40 0.30 0.20 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 1.8±0.2 (5.8) 5.0±0.3 5.0±0.3 (0.8) (4.1) (1.15) [mm] 2.0 Recommended Land Pattern 4.0 6.0 [mm] Power Inductors VOL.10 59 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics ●H・DI-0520 Series 100 8 90 Inductance (H) 110 9 Inductance（μH） 10 7 H・DI-0520-6R8 6 5 H・DI-0520-4R7 4 3 H・DI-0520-3R3 2 H・DI-0520-2R2 1 70 50 2 3 4 5 H･DI-0520-470 40 30 H･DI-0520-330 H･DI-0520-220 10 0 1 H･DI-0520-680 60 20 H・DI-0520-1R2 0 H･DI-0520-101 80 6 H･DI-0520-100 0 7 0 0.2 0.4 0.6 0.8 1 1.2 1.4 Idc (A) Idc（A） H・DI-0520 Series（2000pcs./reel） Dimensions of indented square hole plastic tape J F [mm] E t G H Packing position A ± 0.1 5.4 B ± 0.1 5.4 C ± 0.3 12.0 D ± 0.1 5.5 E ± 0.1 1.75 F ± 0.1 8.0 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 2.2 0.4 A C D K B Reel dimensions [mm] W1 A B ø330 ø80 E D ± 1.0 ø21.0 E ± 0.5 2.0 W1 +2.0, –0 12.5 W2 ± 2.0 16.5 B A C C ± 0.5 ø13.0 D W2 Power Inductors VOL.10 60 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-0630 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-0630 Series Inductance at 100kHz,1mA （μH） 1.3± 30% 2.4± 30% 3.8± 30% 4.7± 30% 6.8± 30% 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 20% 100± 20% Model H・DI-0630-1R3 H・DI-0630-2R4 H・DI-0630-3R8 H・DI-0630-4R7 H・DI-0630-6R8 H・DI-0630-100 H・DI-0630-150 H・DI-0630-220 H・DI-0630-330 H・DI-0630-470 H・DI-0630-680 H・DI-0630-101 DC resistance （mΩ）max. Rated current （A） 22 28 40 43 53 67 110 170 240 350 500 680 2.70 2.50 2.00 1.90 1.60 1.20 1.10 0.85 0.70 0.60 0.50 0.45 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 2.8±0.2 (0.9) (4.2) (0.9) 2.0±0.2 5.9±0.3 6.0±0.3 (1.7) [mm] Recommended Land Pattern 2.6 1.5 3.6 6.6 [mm] Power Inductors VOL.10 61 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type 10 110 9 100 8 90 Inductance（μH） Inductance（μH） DC-Superposed Characteristics 7 H・DI-0630-6R8 6 5 4 H・DI-0630-4R7 3 H・DI-0630-3R8 2 70 50 1 2 3 4 5 6 H・DI-0630-470 40 H・DI-0630-330 H・DI-0630-220 30 H・DI-0630-150 10 0 0.0 0 0 H・DI-0630-680 60 20 H・DI-0630-2R4 H・DI-0630-1R3 1 H・DI-0630-101 80 7 H・DI-0630-100 0.5 1.0 1.5 2.0 Idc（A） Idc（A） H・DI-0630 Series（2000pcs./reel） Dimensions of indented square hole plastic tape [mm] J F G H E t Packing position D K B ± 0.1 6.3 C ± 0.3 12.0 D ± 0.1 5.5 E ± 0.1 1.75 F ± 0.1 8.0 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 3.2 0.4 B C 220 A ± 0.1 6.3 A Reel dimensions [mm] W1 A B ø330 ø80 E D ± 1.0 ø21.0 E ± 0.5 2.0 W1 +2.0, –0 12.5 W2 ± 2.0 16.5 B A C C ± 0.5 ø13.0 D W2 Power Inductors VOL.10 62 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-0740 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-0740 Series Inductance at 100kHz,1mA （μH） 1.2± 30% 2.2± 30% 3.0± 30% 4.7± 30% 6.8± 30% 10± 25% 15± 25% 22± 25% 33± 25% 47± 25% 68± 25% 100± 25% Model H・DI-0740-1R2 H・DI-0740-2R2 H・DI-0740-3R0 H・DI-0740-4R7 H・DI-0740-6R8 H・DI-0740-100 H・DI-0740-150 H・DI-0740-220 H・DI-0740-330 H・DI-0740-470 H・DI-0740-680 H・DI-0740-101 DC resistance （mΩ）max. Rated current （A） 14 20 22 29 37 47 60 83 140 160 230 350 4.50 4.00 3.00 2.50 1.70 1.40 1.20 0.90 0.80 0.70 0.65 0.50 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 3.8±0.2 (0.9) (5.3) (0.9) 2.0±0.2 7.1±0.3 7.1±0.3 (2.8) [mm] Recommended Land Pattern 3.6 2.5 3.7 8.7 [mm] Power Inductors VOL.10 63 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics 10 110 9 100 Inductance（μH） Inductance（μH） 8 7 H・DI-0740-6R8 6 5 H・DI-0740-4R7 4 3 H・DI-0740-3R0 2 H・DI-0740-2R2 H・DI-0740-101 90 80 70 H・DI-0740-680 60 50 40 H・DI-0740-470 H・DI-0740-330 30 H・DI-0740-220 H・DI-0740-150 20 1 10 H・DI-0740-1R2 0 0 1 2 3 4 5 6 7 8 9 H・DI-0740-100 0 0.0 10 0.5 1.0 1.5 2.0 2.5 3.0 Idc（A） Idc（A） H・DI-0740 Series（1000pcs./reel） Dimensions of indented square hole plastic tape F G H J E [mm] t Packing position C D K B 100 A ± 0.1 7.4 B ± 0.1 7.4 C ± 0.3 16.0 D ± 0.1 7.5 E ± 0.1 1.75 F ± 0.1 12.0 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 4.2 0.4 terminals A Reel dimensions [mm] W1 A B ø330 ø80 E D ± 1.0 ø21.0 E ± 0.5 2.0 W1 +2.0, –0 16.5 W2 ± 2.0 20.5 B A C C ± 0.5 ø13.0 D W2 Power Inductors VOL.10 64 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-0940 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-0940 Series Inductance at 10kHz,1mA （μH） 6.8± 25% 10± 25% 15± 25% 22± 25% 33± 25% 47± 20% 68± 20% 100± 20% 150± 20% 220± 20% 330± 20% 470± 20% 680± 20% 1000± 20% Model H・DI-0940-6R8 H・DI-0940-100 H・DI-0940-150 H・DI-0940-220 H・DI-0940-330 H・DI-0940-470 H・DI-0940-680 H・DI-0940-101 H・DI-0940-151 H・DI-0940-221 H・DI-0940-331 H・DI-0940-471 H・DI-0940-681 H・DI-0940-102 DC resistance （Ω）max. Rated current （A） 0.045 0.053 0.08 0.12 0.17 0.23 0.30 0.43 0.70 1.0 1.5 2.3 3.7 4.6 3.40 2.80 2.30 1.90 1.50 1.30 1.10 0.88 0.72 0.59 0.48 0.41 0.34 0.28 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 4.0 max. 3.0±0.3 9.5 max. 9.5 max. 3.5 min. 2.4±0.3 2.4±0.3 [mm] Recommended Land Pattern 10.5 4.5 3.0 3.0 4.4 9.2 terminal land [mm] Power Inductors VOL.10 65 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics H・DI-0940 Series 110 100 Inductance (H) 90 H・DI-0940-101 80 H・DI-0940-680 70 H・DI-0940-470 H・DI-0940-330 H・DI-0940-220 H・DI-0940-150 H・DI-0940-100 H・DI-0940-6R8 60 50 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Idc (A) H・DI-0940 Series（1000pcs./reel） Dimensions of indented square hole plastic tape G H J [mm] Packing position B C D F E T A ± 0.1 9.7 B ± 0.1 9.7 C ± 0.3 16 D ± 0.1 7.5 E ± 0.1 1.75 F G H J K t ± 0.1 ± 0.05 ± 0.1 +0.1, –0 ± 0.1 ± 0.05 12 2.0 4.0 ø1.5 4.5 0.4 A K Reel dimensions [mm] W1 A ± 2.0 330 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 +2.0, -0 16.5 W2 ± 1.0 19.5 A B E C r D W2 Power Inductors VOL.10 66 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-1040 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-1040 Series Inductance at 100kHz,1mA （μH） 1.5 ± 30% 2.0 ± 30% 3.0 ± 30% 4.2 ± 30% 5.6 ± 30% 7.5 ± 30% 10 ± 30% 15 ± 20% 22 ± 20% 33 ± 20% 47 ± 20% 68 ± 20% 100 ± 20% Model H・DI-1040-1R5 H・DI-1040-2R0 H・DI-1040-3R0 H・DI-1040-4R2 H・DI-1040-5R6 H・DI-1040-7R5 H・DI-1040-100 H・DI-1040-150 H・DI-1040-220 H・DI-1040-330 H・DI-1040-470 H・DI-1040-680 H・DI-1040-101 DC resistance （mΩ）max. Rated current （A） 12 16 17 21 25 27 35 52 63 100 140 220 300 7.3 6.4 5.8 5.4 5.0 4.7 3.9 3.4 2.9 2.4 1.9 1.6 1.3 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 3.8±0.2 (1.3) (7.5) (1.3) 3.0±0.2 10.2 ±0.3 10.2 ±0.3 (2.8) [mm] Recommended Land Pattern 3.6 1.8 7.1 10.7 [mm] Power Inductors VOL.10 67 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics 10 110 9 100 Inductance（μH） Inductance（μH） 8 7 H・DI-1040-7R6 6 5 H・DI-1040-5R6 4 H・DI-1040-4R2 3 H・DI-1040-3R0 2 70 50 2 3 4 5 6 7 8 9 10 11 12 H・DI-1040-470 40 30 H・DI-1040-330 H・DI-1040-220 H・DI-1040-150 0 0.0 0 1 H・DI-1040-680 60 10 H・DI-1040-1R5 0 H・DI-1040-101 80 20 H・DI-1040-2R0 1 90 13 H・DI-1040-100 1.0 2.0 3.0 4.0 5.0 6.0 Idc（A） Idc（A） H・DI-1040 Series（1000pcs./reel） Dimensions of indented square hole plastic tape J F G H [mm] E K t B C D Packing position A ± 0.1 10.6 B ± 0.1 10.6 C ± 0.3 24.0 D ± 0.1 11.5 E ± 0.1 1.75 F ± 0.1 16.0 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 4.2 0.4 220 A Reel dimensions [mm] W1 A B ø380 ø80 E D ± 1.0 ø21.0 E ± 0.5 2.0 W1 +2.0, –0 24.4 W2 ± 2.0 28.4 B A C C ± 0.5 ø13.0 D W2 Power Inductors VOL.10 68 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-1240 Series [RoHS [RoHS Compliant] Compliant] ●H・DI-1240 Series Inductance at 10kHz,1mA （μH） 2.2± 25% 3.3± 25% 4.7± 25% 6.8± 25% 10± 25% 15± 25% 22± 25% 33± 25% 47± 20% 68± 20% 100± 20% 150± 20% 220± 20% 330± 20% 470± 20% 680± 20% 1000± 20% Model H・DI-1240-2R2 H・DI-1240-3R3 H・DI-1240-4R7 H・DI-1240-6R8 H・DI-1240-100 H・DI-1240-150 H・DI-1240-220 H・DI-1240-330 H・DI-1240-470 H・DI-1240-680 H・DI-1240-101 H・DI-1240-151 H・DI-1240-221 H・DI-1240-331 H・DI-1240-471 H・DI-1240-681 H・DI-1240-102 DC resistance （Ω）max. Rated current （A） 0.017 0.023 0.026 0.033 0.039 0.060 0.075 0.12 0.18 0.24 0.30 0.50 0.74 1.1 1.6 2.5 3.7 5.10 4.60 4.30 3.90 3.50 2.90 2.40 1.90 1.60 1.40 1.10 0.90 0.75 0.60 0.50 0.40 0.35 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 4.0 max. 4.0±0.3 12.5 max. 12.5 max. 5.5 min. 2.9±0.3 2.9±0.3 [mm] Recommended Land Pattern 13.5 4.0 5.5 5.0 6.3 12.1 terminal land [mm] Power Inductors VOL.10 69 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics H・DI-1240 Series 100 H・DI-1240-101 90 Inductance (H) 80 70 H・DI-1240-680 60 50 H・DI-1240-470 40 H・DI-1240-220 30 H・DI-1240-150 H・DI-1240-100 20 10 0 0 1.0 2.0 3.0 4.0 5.0 6.0 Idc (A) H・DI-1240 Series（500pcs./reel） Dimensions of indented square hole plastic tape G H J [mm] Packing position C D F E T A ± 0.1 12.6 B ± 0.1 12.6 C ± 0.3 24 D ± 0.1 11.5 E ± 0.1 1.75 F G H J K t ± 0.1 ± 0.05 ± 0.1 +0.1, –0 ± 0.1 ± 0.05 16 2.0 4.0 ø1.5 4.2 0.4 A K Reel dimensions [mm] W1 P1 r A ± 2.0 330 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 2.0, -0 24.4 W2 ± 1.0 27.4 A B E C D Power Inductors VOL.10 70 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-1245G Series [RoHS [RoHS Compliant] Compliant] ●H・DI-1245G Series Inductance at 100kHz,1mA （μH） 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 20% 100± 20% 150± 20% 220± 20% Model H・DI-1245G-100 H・DI-1245G-150 H・DI-1245G-220 H・DI-1245G-330 H・DI-1245G-470 H・DI-1245G-680 H・DI-1245G-101 H・DI-1245G-151 H・DI-1245G-221 DC resistance （Ω）max. Rated current （A） 28m 50m 66m 97m 0.15 0.19 0.28 0.48 0.61 4.50 3.20 2.90 2.70 1.90 1.50 1.30 1.00 0.85 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 12.5 max. 4.0±0.3 12.5 max. 4.5 max. 7.5±0.3 [mm] Recommended Land Pattern 13.4 3.8 5.3 5.5 6.9 12.0 terminal land [mm] Power Inductors VOL.10 71 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics H・DI-1245G Series 110 100 H・DI-1245G-101 Inductance (H) 90 80 H・DI-1245G-680 70 60 H・DI-1245G-470 H・DI-1245G-330 H・DI-1245G-220 H・DI-1245G-150 H・DI-1245G-100 50 40 30 20 10 0 0 1 2 3 4 5 6 7 8 Idc (A) H・DI-1245G Series（500pcs./reel） Dimensions of indented square hole plastic tape t G H J [mm] E F D Packing position C B terminals A ± 0.1 12.6 B ± 0.1 12.6 C ± 0.3 24.0 D ± 0.1 11.5 E ± 0.1 1.75 F G H J K t ± 0.1 ± 0.05 ± 0.1 +0.1, –0 ± 0.1 ± 0.05 16.0 2.0 4.0 ø1.5 5.1 0.4 A K Reel dimensions [mm] W1 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 2.0 24.4 W2 ± 3.0 27.4 A B E C A ± 2.0 330 r D W2 Power Inductors VOL.10 72 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Leadless Power Inductors H･DI-1280G Series [RoHS [RoHS Compliant] Compliant] ●H・DI-1280G Series Inductance at 100kHz,1mA （μH） 1.7 ± 30% 2.7 ± 30% 3.3 ± 30% 4.7 ± 30% 6.0 ± 30% 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 20% 100± 20% 150± 20% 220± 20% Model H・DI-1280G-1R7 H・DI-1280G-2R7 H・DI-1280G-3R3 H・DI-1280G-4R7 H・DI-1280G-6R0 H・DI-1280G-100 H・DI-1280G-150 H・DI-1280G-220 H・DI-1280G-330 H・DI-1280G-470 H・DI-1280G-680 H・DI-1280G-101 H・DI-1280G-151 H・DI-1280G-221 DC resistance （mΩ）max. Rated current （A） 9 10 11 13 14 22 25 35 49 69 100 150 210 300 8.5 8.0 7.5 6.5 6.0 5.4 4.7 4.0 3.3 2.7 2.2 1.9 1.5 1.3 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions 12.5 max. 4.0±0.3 12.5 max. 8.0 max. 7.5±0.3 [mm] Recommended Land Pattern 13.4 3.8 5.3 5.5 6.9 12.0 terminal land [mm] Power Inductors VOL.10 73 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type DC-Superposed Characteristics 90 8 80 Inductance（μH） 100 9 Inductance（μH） 10 7 6 H・DI-1280G-6R0 5 H・DI-1280G-4R7 4 H・DI-1280G-3R3 3 H・DI-1280G-2R7 2 70 H・DI-1280G-680 60 50 H・DI-1280G-470 40 30 H・DI-1280G-330 H・DI-1280G-220 20 1 H・DI-1280G-150 10 H・DI-1280G-1R7 H・DI-1280G-100 0 0 0 1 2 3 4 5 6 7 0 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 Idc（A） Idc（A） 500 Inductance（μH） 450 400 350 300 250 H・DI-1280G-221 200 H・DI-1280G-151 150 H・DI-1280G-101 100 50 0 0 1 2 3 4 5 Idc（A） H・DI-1280G Series（500pcs./reel） Dimensions of indented square hole plastic tape t G H [mm] J E F D Packing position C B terminals A ± 0.1 12.6 B ± 0.1 12.6 C ± 0.3 24.0 D ± 0.1 11.5 E ± 0.1 1.75 F G H J K t ± 0.1 ± 0.05 ± 0.1 +0.1, –0 ± 0.1 ± 0.05 16.0 2.0 4.0 ø1.5 8.6 0.4 A K Reel dimensions [mm] W1 A ± 2.0 330 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 2.0 24.4 W2 ± 3.0 27.4 A B E C r D W2 Power Inductors VOL.10 74 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type High Inductance Type SMD Inductors H･LI Series [RoHS [RoHS Compliant] Compliant] Inductance at 160kHz,500mV （mH） 2.020% 4.320% 5.020% Model H・LI-0505-202 H・LI-0505-432 H・LI-0505-502 DC resistance （Ω）max. Rated current （mA） 10 18 20 100 70 40 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Shape and Dimensions Recommended Land Pattern 5.7 max. 5.3 max. 4.0 5.0 5.7 max. 6.4 2.3 3.3 5.3 land terminal [mm] Impedance vs. Frequency DC-Superposed Characteristics Measuring instrument: HP 4284 LCR meter (160kHz, 500mV) Measuring instrument: HP 4285 LCR meter (10kHz, 1mA) 6.0 Inductance (mH) Impedance (kΩ) 1000 [mm] Example HLI-0505-432 100 10 5.0 HLI-0505-502 4.0 HLI-0505-432 3.0 HLI-0505-202 2.0 1.0 1 0.01 0 0.1 1 Frequency (MHz) 10 0 50 100 150 Idc (mA) Power Inductors VOL.10 75 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type H・LI-0505 Series（2000pcs./reel） Dimensions of indented square hole plastic tape A-A' cross section B D E 5.5±0.1 A A A C 1.2±0.1 D F B K 1.75±0.1 G 12±0.3 F H J T [mm] A ± 0.1 5.8 B ± 0.1 5.7 C ± 0.1 5.0 D ± 0.1 3.9 E ± 0.1 1.3 F ± 0.1 8.0 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 5.4 0.4 2.85±0.1 B-B' cross section Reel dimensions W1 E C A B r [mm] Packing position D A ± 2.0 330 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 0.1 12.5 W2 ± 0.2 15.5 W2 Power Inductors VOL.10 76 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type SSB Coils [RoHS [RoHS Compliant] Compliant] ●SSB15 Series（SSB 15-□□□） Model SSB15-1R0 SSB15-1R5 SSB15-2R2 SSB15-3R3 SSB15-4R7 SSB15-6R8 SSB15-100 SSB15-150 SSB15-220 SSB15-330 SSB15-470 SSB15-680 SSB15-101 SSB15-151 SSB15-221 SSB15-331 SSB15-471 SSB15-681 SSB15-102 Inductance Ｌ（μH） at 10 kHz, 1mA 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% Rdc （mΩ） max 10 10 20 20 20 30 40 60 80 110 180 220 320 430 600 960 1400 2000 3000 Rated current （Ａ） ΔT=20℃ 10.00 8.80 6.40 5.90 5.00 4.30 3.40 2.70 2.20 1.80 1.40 1.20 1.00 0.87 0.71 0.55 0.45 0.36 0.29 Current (Ref.) （Ａ） ΔT=40℃ L change rate 10% 14.00 12.30 8.90 8.20 7.00 6.00 4.70 3.70 3.00 2.50 1.90 1.60 1.40 1.20 0.99 0.77 0.63 0.50 0.40 24.50 19.60 14.00 12.20 10.80 8.90 7.00 5.70 4.90 4.00 3.20 2.70 2.20 1.80 1.40 1.20 1.00 0.85 0.71 ●SSB14 Series（SSB 14-□□□） Model SSB14-1R0 SSB14-1R5 SSB14-2R2 SSB14-3R3 SSB14-4R7 SSB14-6R8 SSB14-100 SSB14-150 SSB14-220 SSB14-330 SSB14-470 SSB14-680 SSB14-101 SSB14-151 SSB14-221 SSB14-331 SSB14-471 SSB14-681 SSB14-102 Inductance Ｌ（μH） at 10 kHz, 1mA 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% Rdc （mΩ） max 10 20 20 30 30 40 60 100 120 170 210 300 480 710 1000 1500 2300 3400 4400 Rated current （Ａ） ΔT=20℃ 7.00 6.10 5.10 4.10 3.80 3.00 2.40 1.80 1.60 1.30 1.10 0.97 0.75 0.60 0.51 0.40 0.32 0.26 0.23 Current (Ref.) （Ａ） ΔT=40℃ L change rate 10% 9.80 8.50 7.10 5.70 5.30 4.20 3.30 2.50 2.20 1.80 1.50 1.30 1.00 0.84 0.71 0.56 0.44 0.36 0.32 17.50 14.00 11.60 10.00 8.70 7.00 5.80 4.60 3.80 3.10 2.60 2.10 1.80 1.40 1.20 1.00 0.86 0.72 0.58 Power Inductors VOL.10 77 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type ●SSB84 Series（SSB 84-□□□） Model SSB84-1R0 SSB84-1R5 SSB84-2R2 SSB84-3R3 SSB84-4R7 SSB84-6R8 SSB84-100 SSB84-150 SSB84-220 SSB84-330 SSB84-470 SSB84-680 SSB84-101 SSB84-151 SSB84-221 SSB84-331 SSB84-471 SSB84-681 SSB84-102 Inductance Ｌ（μH） at 10 kHz, 1mA 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% Rdc （mΩ） max 40 40 50 50 60 80 100 110 160 200 300 410 570 1100 1450 2000 3300 4100 5600 Rated current （Ａ） ΔT=20℃ 2.30 2.20 2.00 1.90 1.70 1.60 1.40 1.20 1.20 1.00 0.75 0.70 0.60 0.40 0.35 0.30 0.20 0.20 0.18 Current (Ref.) （Ａ） ΔT=40℃ L change rate 10% 3.20 3.00 2.80 2.60 2.30 2.20 1.90 1.60 1.60 1.40 1.00 0.98 0.84 0.56 0.49 0.42 0.28 0.28 0.25 10.00 8.30 7.10 6.20 5.00 4.10 3.30 2.70 2.10 1.70 1.50 1.20 1.10 0.96 0.77 0.62 0.55 0.45 0.35 ●SSB64 Series（SSB 64-□□□） Model SSB64-1R0 SSB64-1R5 SSB64-2R2 SSB64-3R3 SSB64-4R7 SSB64-6R8 SSB64-100 SSB64-150 SSB64-220 SSB64-330 SSB64-470 SSB64-680 SSB64-101 SSB64-151 SSB64-221 SSB64-331 SSB64-471 SSB64-681 SSB64-102 Inductance Ｌ（μH） at 10 kHz, 1mA 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% Rdc （mΩ） max 40 50 60 70 80 100 120 150 240 290 420 830 1000 1100 2400 3150 4000 6600 8400 Rated current （Ａ） ΔT=20℃ Current (Ref.) （Ａ） ΔT=40℃ L change rate 10% 1.70 1.50 1.50 1.50 1.40 1.30 1.20 1.00 0.80 0.70 0.55 0.40 0.35 0.30 0.30 0.20 0.19 0.15 0.14 2.30 2.10 2.10 2.10 1.90 1.80 1.60 1.40 1.10 0.98 0.77 0.56 0.49 0.42 0.42 0.28 0.26 0.21 0.19 Rated current （Ａ） ΔT=20℃ ΔT=40℃ 1.90 1.90 1.60 1.50 1.30 1.20 0.85 0.75 0.65 0.45 0.40 0.35 0.25 0.22 0.20 0.15 0.12 0.10 2.60 2.60 2.20 2.10 1.80 1.60 1.10 1.00 0.91 0.63 0.56 0.49 0.35 0.30 0.28 0.21 0.16 0.14 11.60 10.00 7.70 6.30 5.30 4.30 3.60 2.90 2.40 2.00 1.60 1.40 1.00 0.86 0.71 0.59 0.49 0.41 0.34 ●SSB44 Series（SSB 44-□□□） ● Model SSB44-1R0 SSB44-1R5 SSB44-2R2 SSB44-3R3 SSB44-4R7 SSB44-6R8 SSB44-100 SSB44-150 SSB44-220 SSB44-330 SSB44-470 SSB44-680 SSB44-101 SSB44-151 SSB44-221 SSB44-331 SSB44-471 SSB44-681 Inductance Ｌ（μH） at 10 kHz, 1mA 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% Rdc （mΩ） max 70 70 100 100 100 130 170 270 370 550 820 920 1600 1900 3000 4900 7500 8300 Current (Ref.) （Ａ） L change rate 10% 6.70 5.80 4.70 3.90 3.10 2.60 2.10 1.70 1.30 1.10 0.97 0.83 0.71 0.57 0.46 0.38 0.31 0.29 ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Power Inductors VOL.10 78 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Shape and Dimensions 10.0 max. 14.0 14.0 max. max. 2.5 3.0 3.0 2.0 3.0 5.0 6.0 6.0 6.5 max. 8.0 max. 4.0 4.0 ●SSB 44Series 5.5 max. 6.3 max. 11.6 ●SSB 64Series 6.0 max. 6.0 max. 8.3 max. max. 8.5 max. max. 11.6 ●SSB 84Series 4.8 max. ●SSB 14Series 7.0 max. ●SSB 15Series Electrode: PB material Electrode: PB material Electrode: brass Electrode: PB material Electrode: brass [mm] Recommended Land Pattern SSB 14/15Series SSB 84Series 12.7 9.6 5.4 3.1 3.4 4.6 3.6 3.65 SSB 64Series SSB 44Series 6.1 7.6 2.35 2.4 1.4 3.1 3.6 2.6 [mm] Power Inductors VOL.10 79 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Numbering System SSB - 44 - 101 ① Series ② Core size (indicated by the first numbers of the coreﾕs diameter and height.) Model and core size The Models use 5-digit numbers that show the core size and inductance. The first two digits show the core size, indicated by the first numbers of the coreﾕs diameter and height. Model Core size [mm] SSB 15-□□□ ø11.05.5 SSB 14-□□□ ø11.04.0 SSB 84-□□□ ø8.04.0 SSB 64-□□□ ø6.04.0 SSB 44-□□□ ø4.54.0 ▼▼ ▼ ③ 3Inductance: 10×101 =100（μH） SSB14, 15 Series（500pcs./reel） Dimensions of indented square hole plastic tape t F G H [mm] E J D B C A B C D E F G H J K t ± 0.1 ± 0.1 ± 0.3 ± 0.1 ± 0.1 ± 0.1 ± 0.1 ± 0.1 +0.1, –0 SSB14：6.5 ± 0.1 ± 0.05 11.7 14 24 11.5 1.75 16 2.0 4.0 ø1.5 SSB15：8.0 ± 0.1 0.4 A K Reel dimensions [mm] Packing position W1 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 0.1 12.5 W2 ± 0.3 15.5 A B E C A ± 2.0 380 D r W2 SSB84 Series（1000pcs./reel） Dimensions of indented square hole plastic tape t F G H [mm] E J D B C A ± 0.1 8.7 B ± 0.1 10.4 C ± 0.3 16 D ± 0.1 7.5 E ± 0.1 1.75 F ± 0.1 12 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 6.0 0.4 A K Reel dimensions [mm] W1 A ± 2.0 380 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 0.1 16.5 W2 ± 0.3 19.5 A B E C Packing position r D W2 Power Inductors VOL.10 80 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type SSB64 Series（1000pcs./reel） Dimensions of indented square hole plastic tape P0 P2 T [mm] B MAX. W F E øD0 A ± 0.1 6.7 B ± 0.1 8.4 C ± 0.3 16 D ± 0.1 7.5 E ± 0.1 1.75 F ± 0.1 12 G ± 0.1 2.0 H J K t ± 0.1 +0.1, –0 ± 0.1 ± 0.05 4.0 ø1.5 5.9 0.4 A P1 K Reel dimensions [mm] W1 Packing position A ± 2.0 380 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 0.1 16.5 W2 ± 0.3 19.5 A B E C D r W2 SSB44 Series（2000pcs./reel） Dimensions of indented square hole plastic tape t F G H [mm] E J D B C A ± 0.1 4.8 B ± 0.1 6.0 C ± 0.3 12 D ± 0.1 5.5 E ± 0.1 1.75 F G H J K t ± 0.1 ± 0.05 ± 0.1 +0.1, –0 ± 0.1 ± 0.05 8.0 2.0 4.0 ø1.5 5.4 0.4 A K Reel dimensions [mm] W1 A ± 2.0 380 B ± 5.0 80 C ± 0.5 13 D ± 1.0 21 E ± 0.5 2.0 r R1.0 W1 ± 0.1 12.5 W2 ± 0.3 15.5 A B E C Packing position r D W2 Power Inductors VOL.10 81 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 SMD Type Precautions Shelf Life Precautions for product storage Use within 6 months. If the product is used after a storage period of 6 months or longer, confirm its solderability before use. Recommended conditions for soldering • Soldering iron: Soldering iron temperature: 280˚C to 320˚C Soldering duration: approx. 4 sec. • Flow soldering: Preheating: Approx. 100˚C to 150˚C for 1 min. Soldering temperature: 260˚C± 5˚C for 10± 1 sec. • Reflow soldering: Refer to the following temperature profile. Storage condition • Avoid storage in high temperature and high humidity environment as such condition may deteriorate the solderability of external electrode. • Avoid storage in atmosphere containing toxic gasses or acid (e.g. sulpher and chlorine) as such gas may deteriorate the solderability of external electrode. • Avoid storage near strong magnetic field as such condition may magnetize the product. Storage after unpacking • Products should be stored in environment with temperature lower than 40˚C and humidity lower than 70%RH. • To achieve best solderability, use the products as soon as possible after unpacking. Store the leftover product in dry condition with desiccant. TEMP. (˚C) 300 Temperature(℃) 250 230 1〜2℃/s or under (all rate of rising temperature) 170 150 60〜120s 5s max. 0 30〜40s Time Power Inductors VOL.10 82 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type OH Coils [RoHS [RoHS Compliant] Compliant] Model OH-011Z OH-021Z OH-031Z OH-012Z OH-022Z OH-032Z OH-052Z OH-013Z OH-023Z OH-033Z OH-053Z OH-073Z OH-034SZ OH-054SZ OH-074SZ OH-104SZ OH-024Z OH-034Z OH-054Z OH-074Z OH-104Z OH-035Z OH-055Z OH-075Z OH-105Z OH-205Z Rated current (A) 1 2 3 1 2 3 5 1 2 3 5 7 3 5 7 10 2 3 5 7 10 3 5 7 10 20 Inductance L DC resistance (μH) at 100kHz ±25% at Idc=0 min. at Idc=Rated ＊ （mΩ）max. 200 120 (160) 150 65 41 (55) 50 30 17 (23) 30 600 337 (450) 220 180 101 (135) 65 120 60 (80) 45 45 22 (30) 20 1000 600 (800) 375 500 247 (330) 140 130 75 (100) 55 90 41 (55) 30 90 28 (36) 25 400 187 (250) 105 350 120 (160) 65 250 80 (106) 40 50 22 (30) 15 1500 712 (950) 270 300 172 (230) 95 210 105 (140) 50 100 65 (87) 30 45 22 (30) 10 700 350 (450) 140 600 270 (290) 85 400 120 (160) 50 180 60 (80) 20 20 10 (14) 6 External dimensions (mm) max. ø1710 ø1811 ø1810 ø2111 ø2212 ø2212 ø2313 ø2612 ø2613 ø2612 ø2613 ø2713 ø3214 ø3316 ø3418 ø3416 ø3419 ø3419 ø3420 ø3418 ø3420 ø3919 ø4019 ø4021 ø4120 ø4220 Diameter of magnetic wire (mm ø ) 0.5 0.7 0.8 0.5 0.7 0.8 1.0 0.5 0.7 0.8 1.0 1.2 0.8 1.0 1.2 1.12 P 0.7 0.8 1.0 1.2 1.6 0.8 1.0 1.2 1.6 1.82 P ＊Parenthesized values are examples of actually measured values. ●The core is covered with coating. (powder epoxy coating) Shape and Dimensions Solder-plated 20±5.0 D 1.6~–5 H [mm] Power Inductors VOL.10 83 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type DC-Superposed Characteristics 1000 500 f=100 kHz f=100 kHz Inductance (H) Inductance (H) 500 100 50 OH-011Z OH-021Z OH-22Z OH-012Z 100 OH-32Z 50 OH-052Z 10 10 OH-031Z 5 0.1 1 10 0.1 20 1 Idc (A) 10 f=100 kHz f=100 kHz 1000 500 OH-013Z OH-033Z OH-023Z 100 50 OH-073Z Inductance (H) Inductance (H) 1000 OH-34SZ OH-34Z OH-054Z 100 OH-074SZ OH-053Z 10 0.1 1 5 10 OH-104SZ 10 0.1 20 1 Idc (A) 5 10 20 Idc (A) 1000 f=100 kHz f=100 kHz OH-035Z 1000 OH-055Z Inductance (H) Inductance (H) 20 Idc (A) OH-24Z OH-54SZ 100 OH-074Z 1 Idc (A) 5 10 OH-075Z 10 OH-104Z OH-205Z 10 0.1 OH-105Z 100 20 0.1 1 10 50 Idc (A) Power Inductors VOL.10 84 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SHP Coils [RoHS [RoHS Compliant] Compliant] Inductance Rated current （μH）at 50kHz (A) min. at Idc min. at Idc Rated ＊1 SHP-012 1 4500 365 ( 490) SHP-022 2 1500 115 (155) SHP-032 3 1120 63 (85) SHP-052 5 375 25 (35) SHP-013 1 9000 675 (900) SHP-023 2 4500 260 (350) SHP-033 3 1120 95 (130) SHP-053 5 750 48 (65) SHP-034S 3 3750 215 (290) SHP-054S 5 3750 135 (180) SHP-104S 10 525 25 (35) Model DC resistance （mΩ）max. 340 110 70 30 500 190 80 50 130 85 20 External dimensions Diameter of magnetic wire Temperature rise D×H ＊2 （K） (mmφ) （mm）max. ø2418 0.5 30 ø2418 0.7 30 0.8 ø2519 30 1.0 ø2720 30 0.5 ø2819 30 0.7 ø2919 30 0.8 ø2818 30 1.0 ø2920 30 0.8 ø3521 40 1.0 ø3621 40 1.6 ø3723 40 ･ Parenthesized values are examples of actually measured values. ＊1: Temperature rise of Idc rated. ･ Cores insulation cap: polypropylene, A type insulation H 20±5.0 1.6~ –5 D Shape and Dimensions Solder-plated DC-Superposed Characteristics 10 3 2 f=50kHz 0.3 0.1 SHP-053 0.05 SHP-104S 0.03 SHP-052 Inductance (mH) Inductance (mH) 0.5 f=50kHz 7 5 1 3 1 0.5 0.3 SHP-034S 0.2 SHP-054S 0.01 SHP-033 0.1 0 0.5 2 4 6 8 10 0 0.1 0.2 0.3 0.4 0.5 Idc (A) 1 2 3 4 5 Idc (A) 10 f=50kHz Inductance (mH) 7 5 3 2 1 0.7 0.5 SHP-013 SHP-012 SHP-023 0.3 0.2 SHP-022 0.1 0 0.1 0.2 0.3 0.4 0.5 1 2 3 4 Idc (A) Power Inductors VOL.10 85 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBC Coils [RoHS [RoHS Compliant] Compliant] ●SBC1Series（SBC1-□□□-○○○） Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC1-470-711 SBC1-680-651 SBC1-101-571 SBC1-151-431 SBC1-221-391 SBC1-331-341 SBC1-471-301 SBC1-681-251 SBC1-102-211 SBC1-152-181 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 0.03 0.03 0.04 0.04 0.05 0.06 0.08 0.10 0.13 0.22 0.34 0.42 0.65 1.00 1.20 1.90 2.40 3.40 4.90 8.00 3.10 2.90 2.70 2.30 2.00 1.80 1.70 1.60 1.30 1.00 0.71 0.65 0.57 0.43 0.39 0.34 0.30 0.25 0.21 0.18 Current (Reference value) (A) ΔT=40˚C L change rate–10% 4.30 4.00 3.70 3.20 2.80 2.50 2.30 2.20 1.80 1.40 0.99 0.91 0.79 0.60 0.54 0.47 0.42 0.35 0.29 0.25 5.20 4.00 3.20 2.70 2.10 1.90 1.50 1.20 1.00 0.83 0.71 0.59 0.47 0.38 0.32 0.26 0.21 0.18 0.14 0.12 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Bulk 10,000pcs/box ●SBC2Series（SBC2-□□□-○○○） Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 SBC2-101-671 SBC2-151-501 SBC2-221-411 SBC2-331-341 SBC2-471-271 SBC2-681-211 SBC2-102-181 SBC2-152-141 SBC2-222-121 SBC2-332-900 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 1.0± 20% 1.5± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 0.01 0.02 0.03 0.04 0.05 0.06 0.08 0.11 0.18 0.21 0.26 0.41 0.64 0.87 1.40 2.00 3.10 4.00 6.20 8.00 13.80 6.10 4.00 3.50 2.60 2.40 2.10 1.60 1.30 1.10 0.95 0.87 0.67 0.50 0.41 0.34 0.27 0.21 0.18 0.14 0.12 0.09 Current (Reference value) (A) ΔT=40˚C L change rate–10% 8.50 5.60 4.90 3.60 3.30 2.90 2.20 1.80 1.50 1.30 1.20 0.93 0.70 0.57 0.47 0.37 0.29 0.25 0.19 0.16 0.12 6.40 4.90 4.00 3.10 2.70 2.10 1.70 1.40 1.20 1.00 0.81 0.68 0.55 0.45 0.37 0.32 0.26 0.21 0.17 0.14 0.11 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Soft lead・bulk 3,750pcs/box Pin lead・bulk 8,000pcs/box Power Inductors VOL.10 86 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type ●SBC3Series（SBC3-□□□-○○○） Model SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 SBC3-221-681 SBC3-331-551 SBC3-471-491 SBC3-681-361 SBC3-102-281 SBC3-152-251 SBC3-222-191 SBC3-332-151 SBC3-472-121 SBC3-682-111 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 0.01 1.2± 20% 7.50 1.5± 20% 0.01 6.30 2.2± 20% 0.02 6.00 3.3± 20% 0.02 4.70 4.7± 20% 0.02 4.20 6.8± 20% 0.03 3.90 0.03 10± 20% 3.60 0.05 15± 20% 2.30 22± 20% 0.06 2.00 0.09 33± 20% 1.70 0.12 47± 10% 1.40 68± 10% 0.19 1.10 0.26 100± 10% 0.96 150± 10% 0.36 0.79 220± 10% 0.49 0.68 330± 10% 0.72 0.55 470± 10% 1.02 0.49 680± 10% 1.62 0.36 1000± 10% 2.37 0.28 1500± 10% 3.64 0.25 2200± 10% 5.62 0.19 3300± 10% 7.66 0.15 4700± 10% 11.40 0.12 6800± 10% 14.50 0.11 Current (Reference value) (A) L change rate–10% ΔT=40˚C 10.50 8.80 8.40 6.50 5.80 5.40 5.00 3.20 2.80 2.30 1.90 1.50 1.30 1.10 0.95 0.77 0.68 0.50 0.39 0.35 0.26 0.21 0.16 0.15 9.80 8.30 7.20 5.60 4.60 4.00 3.00 2.60 2.10 1.80 1.40 1.20 1.00 0.81 0.67 0.53 0.46 0.38 0.31 0.26 0.21 0.17 0.14 0.12 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Bulk 4,000pcs/box ●SBC4Series（SBC4-□□□-○○○） Model SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 SBC4-221-721 SBC4-331-591 SBC4-471-491 SBC4-681-431 SBC4-102-291 SBC4-152-221 SBC4-222-211 SBC4-332-161 SBC4-472-141 SBC4-682-111 SBC4-103-111 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 1.0± 20% 1.5± 20% 2.7± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% 0.01 0.01 0.02 0.02 0.02 0.03 0.04 0.06 0.07 0.09 0.11 0.19 0.26 0.36 0.47 0.67 0.95 1.32 2.15 3.24 4.97 7.69 9.78 15.00 19.50 7.40 7.10 6.60 6.40 5.80 4.50 2.90 2.30 2.00 1.80 1.60 1.20 1.00 0.86 0.72 0.59 0.49 0.43 0.29 0.22 0.21 0.16 0.14 0.11 0.11 Current (Reference value) (A) ΔT=40˚C L change rate–10% 10.30 9.90 9.20 8.90 8.10 6.30 4.00 3.20 2.80 2.50 2.20 1.60 1.40 1.20 1.00 0.82 0.68 0.60 0.40 0.30 0.29 0.22 0.19 0.15 0.15 14.90 12.60 9.60 8.60 7.10 5.60 4.60 4.00 3.20 2.60 2.10 1.80 1.50 1.20 1.00 0.81 0.68 0.57 0.47 0.38 0.32 0.26 0.21 0.18 0.14 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Soft lead・bulk 3,000pcs/box Pin lead・bulk 4,000pcs/box Power Inductors VOL.10 87 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type ●SBC6Series（SBC6-□□□-○○○） Model SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 SBC6-681-631 SBC6-102-561 SBC6-152-451 SBC6-222-351 SBC6-332-281 SBC6-472-241 SBC6-682-181 SBC6-103-161 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 1.0± 20% 1.5± 20% 2.7± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% 0.01 0.01 0.01 0.01 0.01 0.02 0.03 0.03 0.05 0.06 0.08 0.09 0.13 0.23 0.33 0.41 0.63 0.98 1.21 1.80 2.63 4.24 5.92 8.92 13.60 9.60 9.40 8.70 8.50 8.00 6.60 4.60 3.80 3.00 2.70 2.30 2.20 1.70 1.20 1.10 0.87 0.70 0.63 0.56 0.45 0.35 0.28 0.24 0.18 0.16 Current (Reference value) (A) L change rate–10% ΔT=40˚C 13.40 13.10 12.10 11.90 11.20 9.20 6.40 5.30 4.20 3.70 3.20 3.00 2.30 1.60 1.50 1.20 0.98 0.88 0.78 0.63 0.49 0.39 0.33 0.25 0.22 37.70 30.90 22.60 20.00 16.10 13.60 10.90 9.10 7.50 6.10 5.00 4.10 3.50 2.80 2.30 1.90 1.60 1.30 1.10 0.90 0.73 0.61 0.50 0.42 0.35 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Soft lead・bulk 1,600pcs/box Pin lead・bulk 2,000pcs/box ●SBC7Series（SBC7-□□□-○○○） Model SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 SBC7-102-541 SBC7-152-481 SBC7-222-421 SBC7-332-361 SBC7-472-281 SBC7-682-211 SBC7-103-191 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% 0.02 0.02 0.03 0.03 0.05 0.06 0.09 0.12 0.16 0.25 0.45 0.55 0.81 1.20 1.58 2.18 3.51 4.83 7.00 10.30 6.10 5.30 4.80 4.30 3.40 2.80 2.20 1.90 1.70 1.30 0.94 0.85 0.70 0.54 0.48 0.42 0.36 0.28 0.21 0.19 Current (Reference value) (A) ΔT=40˚C L change rate–10% 8.50 7.20 6.70 6.00 4.70 3.90 3.00 2.60 2.30 1.80 1.30 1.10 0.98 0.75 0.67 0.58 0.50 0.39 0.29 0.26 13.90 11.80 9.60 7.80 6.20 5.20 4.50 3.60 2.90 2.40 2.00 1.60 1.40 1.10 0.93 0.77 0.63 0.53 0.44 0.36 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Bulk 1,000pcs/box Power Inductors VOL.10 88 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type ●SBC8Series（SBC8-□□□-○○○） Model SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 SBC8-152-581 SBC8-222-471 SBC8-332-421 SBC8-472-391 SBC8-682-311 SBC8-103-251 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% 0.02 0.02 0.03 0.03 0.04 0.04 0.06 0.09 0.15 0.17 0.25 0.42 0.52 0.78 1.30 1.80 2.50 3.20 4.90 6.90 8.60 6.90 5.30 4.90 4.50 3.70 3.20 2.40 2.00 1.80 1.40 1.10 1.00 0.76 0.58 0.47 0.42 0.39 0.31 0.25 Current (Reference value) (A) L change rate–10% ΔT=40˚C 12.00 9.60 7.40 6.80 6.30 5.10 4.40 3.30 2.80 2.50 1.90 1.50 1.40 1.00 0.81 0.67 0.58 0.54 0.43 0.35 13.90 11.80 9.60 7.80 6.50 5.40 4.30 3.50 3.00 2.40 2.00 1.60 1.30 1.10 0.92 0.78 0.63 0.53 0.44 0.36 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Soft lead・bulk 900pcs/box Pin lead・bulk 1,000pcs/box ●SBC9Series（SBC9-□□□-○○○） Model SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 SBC9-471-601 SBC9-681-551 SBC9-102-451 SBC9-152-341 SBC9-222-271 SBC9-332-221 SBC9-472-181 SBC9-682-141 SBC9-103-121 DC resistance Rated current Inductance L (μH) (Ω) (A) at 10 kHz, 1mA max. ΔT=20˚C 1.0± 20% 1.5± 20% 2.2± 20% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% 0.01 0.01 0.01 0.02 0.02 0.03 0.03 0.04 0.04 0.06 0.09 0.15 0.21 0.26 0.41 0.58 0.82 1.05 1.53 2.49 3.78 5.68 8.20 12.70 16.10 9.80 9.40 7.90 6.20 5.60 4.90 4.20 3.60 3.10 2.50 2.00 1.50 1.20 1.10 0.82 0.67 0.60 0.55 0.45 0.34 0.27 0.22 0.18 0.14 0.12 Current (Reference value) (A) ΔT=40˚C L change rate–10% 13.70 13.10 11.00 8.60 7.80 6.80 5.80 5.00 4.30 3.50 2.80 2.10 1.60 1.50 1.10 0.93 0.84 0.77 0.63 0.47 0.38 0.31 0.25 0.20 0.17 31.10 25.40 21.50 16.40 14.70 12.10 9.60 7.50 6.20 5.20 4.30 3.70 3.00 2.40 2.00 1.60 1.30 1.10 0.87 0.72 0.60 0.48 0.40 0.34 0.28 Terminal Soft lead Pin lead ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Package: Bulk 2,000pcs/box ●Operating temperature range: −20 to +105℃ (Including self-temperature rise) Power Inductors VOL.10 89 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type Shape and Dimensions ●SBC1Series（SBC1-□□□-○○○） ●SBC2Series（SBC2-□□□-○○○） [Soft leads] [Hard leads] +1.0 8.0 max. 1.0 max. Model 3.5 –0.5 Inductance (Non-soldered part) *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 10.5 max. 6.0±1.0 Inductance 4.0±0.5 101 101 101 101 ø7.0 max. 2.5±0.5 471 471 471 471 ø0.5 (CP wire) ø0.6 (CP wire) *Lead pitch is a value at the root end. *With phenolic resin base. *Lead pitch is a value at the root end. *With phenolic resin base. ●SBC3Series（SBC3-□□□-○○○） ●SBC4Series（SBC4-□□□-○○○） [Soft leads] [Hard leads] 11.5 max. 5.0±1.0 12 max. 3.5 1.0 max. (5.5) *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. [Hard leads] 14.5 max. 5.0±1.0 SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Lead diam. ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 221 221 221 221 Inductance ø9.0 max. 5.0±0.5 221 221 221 ø0.6 (CP wire) Model Inductance (Non-soldered part) Inductance *Lead pitch is a value at the root end. *With phenolic resin base. +1.0 –0.5 5.0±0.5 *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 1R0 Inductance (5.5) 4R7 4R7 (Non-soldered part) SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 1R0 1.0 max. Lead diam. ø9.0 max. Model +1.0 9.0 max. 3.5–0.5 1R0 [Soft leads] ø9.0 max. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 5.5±1.0 Inductance ø9.0 max. Lead diam. [Hard leads] 10.5 max. ø5.5 max. SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 (4.0) ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 1R0 (3.0) *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 Lead diam. 1R0 Inductance 1R0 1R0 1R0 (Non-soldered part) ø5.5 max. Model +1.0 3.5 –0.5 ø7.0 max. 8.5 max. 1.0 max. 1R0 [Soft leads] ø0.6 (CP wire) *Lead pitch is a value at the root end. *With phenolic resin base. [mm] Power Inductors VOL.10 90 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type Shape and Dimensions ●SBC6Series（SBC6-□□□-○○○） ●SBC7Series（SBC7-□□□-○○○） [Soft leads] [Soft leads] (10) ●SBC9Series（SBC9-□□□-○○○） [Soft leads] 3.5 +1.0 –0.5 3.5 +1.0 –0.5 (Non-soldered part) Inductance (8.5) 2R2 2R2 *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. [Hard leads] 7.5±0.5 471 471 471 15.5 max. 6.5±1.0 Inductance 471 ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 max. 1.0 max. max. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Lead diam. ø12 (10.0) 10±0.5 152 152 *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. [Hard leads] 22.5 max. 8.5±1.0 Inductance 12 Model max. Inductance 6R8 6R8 6R8 (Non-soldered part) ø12 19 max. 1.0 max. 6R8 1R2 ø1.0 (CP wire) ●SBC8Series（SBC8-□□□-○○○） 152 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 *Lead pitch is a value at the root end. *With phenolic resin base. [Soft leads] ø15 max. 8.5±1.0 Lead diam. Inductance ø0.8 (CP wire) *Lead pitch is a value at the root end. *With phenolic resin base. ø15 max. 1R2 max. 17.5 max. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 10.0±0.5 7.5±0.5 681 681 681 681 ø12 max. Inductance [Hard leads] 102 6.5±1.0 Inductance *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 102 [Hard leads] 18.5 max. Model max. (Non-soldered) part 102 (8.5) 1R0 1R0 1R0 max. ø12 *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1.0 ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø15 Inductance (Non-soldered part) 14 max. 3.5 +1.0 –0.5 Lead diam. max. Model SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 ø15 3.5+1.0 –0.5 15 max. 1.0 max. ø1.0 (CP wire) Model SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Lead diam. ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.8 (CP wire) *Lead pitch is a value at the root end. *With phenolic resin base. *Lead pitch is a value at the root end. *With phenolic resin base. [mm] Numbering System SBC 1 - 101 - 571 Model Core size [mm] SBC1 Series ø4.5 6.5 SBC2 Series ø6.0 6.0 SBC3 Series ø8.0 7.0 SBC4 Series ø8.010.0 SBC6 Series ø11.013.0 SBC7 Series ø14.012.0 SBC8 Series ø14.017.0 SBC9 Series ø11.010.0 ① Series ② Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. ③ Inductance:10×101=100（μH） ④ Rated current: 57×101=570（mA） *The presence of an external tube may not be indicated on the surface of sample products. Power Inductors VOL.10 91 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-47HY Coils [RoHS [RoHS Compliant] Compliant] ●SBCP-47HY Series (SBCP-47HY□□□B) Model SBCP-47HY1R2B SBCP-47HY1R5B SBCP-47HY2R2B SBCP-47HY2R7B SBCP-47HY3R3B SBCP-47HY3R9B SBCP-47HY4R7B SBCP-47HY5R6B SBCP-47HY6R8B SBCP-47HY8R2B SBCP-47HY100B SBCP-47HY120B SBCP-47HY150B SBCP-47HY220B SBCP-47HY270B SBCP-47HY330B SBCP-47HY390B SBCP-47HY470B SBCP-47HY560B SBCP-47HY680B SBCP-47HY820B SBCP-47HY101B SBCP-47HY121B SBCP-47HY151B SBCP-47HY221B SBCP-47HY271B SBCP-47HY331B SBCP-47HY391B SBCP-47HY471B SBCP-47HY561B SBCP-47HY681B SBCP-47HY821B SBCP-47HY102B DC resistance Inductance （Ω） at 10 kHz、1mA（μH） max. 1.2 ± 20% 1.5 ± 20% 2.2 ± 20% 2.7 ± 20% 3.3 ± 20% 3.9 ± 20% 4.7 ± 20% 5.6 ± 20% 6.8 ± 20% 8.2 ± 20% 10 ± 20% 12 ± 20% 15 ± 20% 22 ± 20% 27 ± 20% 33 ± 20% 39 ± 20% 47 ± 10% 56 ± 10% 68 ± 10% 82 ± 10% 100 ± 10% 120 ± 10% 150 ± 10% 220 ± 10% 270 ± 10% 330 ± 10% 390 ± 10% 470 ± 10% 560 ± 10% 680 ± 10% 820 ± 10% 1000 ± 10% 21m 24m 29m 32m 37m 40m 43m 49m 52m 59m 67m 76m 87m 123m 137m 169m 213m 267m 350m 397m 519m 584m 657m 878m 1.10 1.30 1.80 2.00 2.80 3.10 3.50 5.30 6.00 Rated current （Ａ） 3.00 2.85 2.60 2.45 2.30 2.15 2.10 1.95 1.90 1.70 1.60 1.40 1.25 1.05 0.96 0.87 0.79 0.73 0.65 0.60 0.53 0.50 0.45 0.41 0.33 0.30 0.27 0.25 0.22 0.21 0.19 0.16 0.15 Current (Reference value) （Ａ） L−10%（85℃） ΔT=20℃ ΔT=40℃ 3.02 2.85 2.59 2.47 2.28 2.18 2.10 1.99 1.92 1.81 1.69 1.59 1.48 1.24 1.18 1.06 1.95 0.84 0.65 0.61 0.53 0.50 0.47 0.41 0.36 0.34 0.29 0.26 0.22 0.21 0.20 0.16 0.15 4.26 4.01 3.66 3.48 3.21 3.08 2.96 2.80 2.71 2.55 2.38 2.24 2.09 1.75 1.66 1.50 1.33 1.19 0.87 0.81 0.71 0.67 0.63 0.55 0.48 0.45 0.39 0.36 0.31 0.29 0.28 0.22 0.21 4.16 3.67 3.20 2.92 2.70 2.51 2.30 2.04 1.93 1.74 1.60 1.41 1.26 1.04 0.96 0.87 0.79 0.73 0.66 0.60 0.55 0.50 0.45 0.41 0.33 0.30 0.27 0.25 0.23 0.21 0.19 0.17 0.16 Package: Bulk・6,000pcs/box Tape & reel・1,000pcs/AMMO pack 4,000pcs/box Operating temperature range: −20 to +105℃ (including the heat generation by the coil) Power Inductors VOL.10 92 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type Shape and Dimensions 3.5±0.5 1.0 max. 7.5 max. ø5.0 max. *Lead: hard copper wire (ø0.5) 2.5±0.5 [mm] Numbering System SBCP - 47HY 150 B ① Series ② Core size : Outer size x height （φ4.5×7） ③ Inductance :15×100=15（μH） ④ Packaging type :（B）indicates bulk type. No indication for tape type. DC-Superposed Characteristics Measurement conditions: 10kHz, 1mA at 25˚C 110 SBCP-47HY101B 100 Inductance (H) 90 80 SBCP-47HY680B 70 60 50 SBCP-47HY470B 40 SBCP-47HY330B 30 SBCP-47HY220B SBCP-47HY100B 20 10 0 0 0.5 1 1.5 2 2.5 Idc (A) SBCP-47HY Series Dimensions of indented square hole plastic tape △h [mm] W2 P ± 1.0 12.7 P0 ± 0.3 12.7 P1 ± 0.7 5.1 F W W0 W1 W2 H H1 ± 0.5 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 max. 2.5 18 12.5 9.0 3.0 18 29.5 D0 ± 0.2 ø4.0 h ± 2.0 ø0.5 0 d W W0 W1 H F d P1 H1 P D0 P0 Power Inductors VOL.10 93 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-87HY Coils [RoHS [RoHS Compliant] Compliant] ●SBCP-87HY Series（SBCP-87HY□□□H） Inductance at 10 kHz, 1mA Ｌ（μH） Model SBCP-87HY1R0H SBCP-87HY1R5H SBCP-87HY2R2H SBCP-87HY3R3H SBCP-87HY4R7H SBCP-87HY6R8H SBCP-87HY100H SBCP-87HY150H SBCP-87HY220H SBCP-87HY330H SBCP-87HY470H SBCP-87HY680H SBCP-87HY820H SBCP-87HY101H SBCP-87HY151H SBCP-87HY221H SBCP-87HY331H SBCP-87HY471H SBCP-87HY681H SBCP-87HY102H 1.0± 30% 1.5± 30% 2.2± 30% 3.3± 30% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 10% 82± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% DC resistance （Ω） max. Rated current （Ａ） ΔT=20℃ ΔT=40℃ Current (Reference value) （Ａ） L change rate–10% 0.02 0.02 0.03 0.03 0.03 0.04 0.05 0.06 0.08 0.12 0.15 0.19 0.23 0.30 0.39 0.57 0.92 1.30 1.66 2.82 4.50 4.20 4.00 3.20 3.20 2.80 2.30 2.10 1.90 1.50 1.30 1.16 1.10 0.90 0.79 0.65 0.50 0.42 0.33 0.25 6.30 5.80 5.60 4.40 4.40 3.90 3.20 2.90 2.60 2.10 1.80 1.60 1.50 1.20 1.10 0.91 0.70 0.58 0.46 0.35 10.20 7.00 6.10 4.80 4.30 3.40 2.40 2.20 1.80 1.50 1.20 1.00 0.94 0.87 0.70 0.57 0.47 0.39 0.32 0.27 Package: Soft lead・bulk 4,000pcs/box Pin lead・bulk 500pcs/AMMO pack，2,000pcs/box Shape and Dimensions ●SBCP-87HY Series（SBCP-87HY□□□H） max. 1 0 1 8.5 max. ø9.5 *3.5 –+1.0 0.5 1 0 1 ø0.6 (PB wire) 5.0±0.5 * For bulk type * Lead pitch is value at the root end. [mm] Numbering System SBCP - 87HY - 101 H B ① Series ② Core size (Outer size x height) Model numbers and Core sizes The model number (5 digits) consists of core size and inductance as shown below. Model Core size [mm] SBCP-87HY Ｈ ø8.0 7.5 ③ Inductance: 10×101=100（μH） ④ Presence of external tube: H shows presence. ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. *The presence of an external tube may not be indicated on the surface of sample products. Power Inductors VOL.10 94 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-87HY Series Dimensions of indented square hole plastic tape h P [mm] W W0 D0 P1 ± 0.7 3.85 F W W0 W1 W2 H D0 ± 1.0 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 ± 0.2 5.0 18 12.5 9.0 3.0 18 ø4.0 d 0.6 h ± 2.0 0 [mm] W1 d H P1 F P0 ± 0.3 12.7 W2 H1 P ± 1.0 12.7 H1 SBCP-87HY H max. 28.5 P0 Power Inductors VOL.10 95 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-80HY Coils [RoHS [RoHS Compliant] Compliant] ●SBCP-80HY Series（SBCP-80HY□□□H） Model Inductance L (μH) at 10 kHz, 1mA SBCP-80HY1R5H SBCP-80HY2R2H SBCP-80HY3R3H SBCP-80HY4R7H SBCP-80HY6R8H SBCP-80HY100H SBCP-80HY150H SBCP-80HY220H SBCP-80HY330H SBCP-80HY470H SBCP-80HY680H SBCP-80HY820H SBCP-80HY101H SBCP-80HY151H SBCP-80HY221H SBCP-80HY331H SBCP-80HY471H SBCP-80HY681H SBCP-80HY102H 1.5± 30% 2.2± 30% 3.3± 30% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 82± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% DC resistance (Ω) max. Rated current (A) ΔT=20˚C 4.50 4.00 3.60 3.30 3.30 2.90 2.50 2.40 2.10 1.90 1.70 1.30 1.10 1.00 0.90 0.70 0.65 0.50 0.40 0.02 0.03 0.04 0.04 0.05 0.05 0.08 0.08 0.09 0.13 0.16 0.24 0.35 0.41 0.52 0.75 0.95 1.40 1.89 Current (Reference value) (A) ΔT=40˚C L change rate–10% 6.30 5.60 5.00 4.60 4.60 4.00 3.50 3.30 2.90 2.60 2.30 1.80 1.50 1.40 1.20 0.98 0.91 0.70 0.56 13.50 11.70 9.20 7.60 6.50 5.30 4.00 3.40 2.70 2.20 1.80 1.70 1.60 1.20 1.00 0.85 0.71 0.58 0.48 Package: Bulk・4,000pcs/box Tape & reel・500pcs/AMMO pack 2,000pcs/box Shape and Dimensions ●SBCP-80HY Series（SBCP-80HY□□□H） 0 1 1 0 1 1 0 1 *3.5 +1.0 –0.5 1 11 max. ø9.5 max. ø0.6 (PB wire) 5.0±0.5 * For bulk type * Lead pitch is value at the root end. [mm] Numbering System SBCP - 80HY - 101 H B ① Series ② Core size (Outer size x height) Model numbers and Core sizes The model number (5 digits) consists of core size and inductance as shown below. Model Core size [mm] SBCP-80HY Ｈ ø8.0 10.0 ③ Inductance: 10×101=100（μH） ④ Presence of external tube: H shows presence. ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. *The presence of an external tube may not be indicated on the surface of sample products. Power Inductors VOL.10 96 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-80HY Series Dimensions of indented square hole plastic tape h P [mm] W W0 D0 P1 ± 0.7 3.85 F W W0 W1 W2 H D0 ± 1.0 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 ± 0.2 5.0 18 12.5 9.0 3.0 18 ø4.0 d 0.6 h ± 2.0 0 [mm] W1 d H P1 F P0 ± 0.3 12.7 W2 H1 P ± 1.0 12.7 H1 SBCP-80HY H max. 31 P0 Power Inductors VOL.10 97 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-11HY Coils [RoHS [RoHS Compliant] Compliant] ●SBCP-11HY Series（SBCP-11HY□□□H） Inductance L (μH) at 10 kHz, 1mA Model SBCP-11HY1R5H SBCP-11HY2R2H SBCP-11HY3R3H SBCP-11HY4R7H SBCP-11HY6R8H SBCP-11HY100H SBCP-11HY150H SBCP-11HY220H SBCP-11HY330H SBCP-11HY470H SBCP-11HY680H SBCP-11HY101H SBCP-11HY151H SBCP-11HY221H SBCP-11HY331H SBCP-11HY471H SBCP-11HY681H SBCP-11HY102H DC resistance (Ω) max. Rated current (A) ΔT=20˚C ΔT=40˚C 0.02 0.02 0.02 0.03 0.03 0.04 0.05 0.06 0.07 0.10 0.12 0.19 0.26 0.40 0.60 0.76 1.00 1.70 5.00 4.70 4.40 4.10 3.60 3.10 2.80 2.50 2.30 2.00 1.80 1.30 1.10 0.95 0.74 0.66 0.55 0.42 7.20 6.70 6.30 5.80 5.10 4.50 4.10 3.60 3.30 2.90 2.60 1.90 1.60 1.30 1.00 0.93 0.77 0.60 1.5± 30% 2.2± 30% 3.3± 20% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 20% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% Current (Reference value) (A) L change rate–10% 25.30 21.40 18.50 14.60 12.10 9.60 7.90 6.40 5.40 4.40 3.60 3.00 2.40 2.00 1.60 1.40 1.10 0.96 Package: Bulk・2,000pcs/box ･ Tape & reel・400pcs/AMMO pack 1,600pcs/box ･ Operating temperature range: −20 to +105℃ (incl. coil heat) ･ Storage conditions: −5 to +40℃, 40to60% RH (in tape status), −20to + 85℃ (in bulk status) ･ Do NOT expose to direct sunlight Shape and Dimensions ●SBCP-11HY Series（SBCP-11HY□□□H） max. 0 1 1 0 1 *3.5+1.0 –0.5 12 1 max. ø12.5 ø0.6 (PB wire) 5.0±0.5 * For bulk type * Lead pitch is value at the root end. [mm] Numbering System SBCP - 11HY - 101 H B ① Series ② Core size (Outer size x height) Model numbers and Core sizes The model number (5 digits) consists of core size and inductance as shown below. Model Core size [mm] SBCP-11HY Ｈ ø11.0 11.0 ③ Inductance: 10×101=100（μH） ④ Presence of external tube: H shows presence. ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. *The presence of an external tube may not be indicated on the surface of sample products. Power Inductors VOL.10 98 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-11HY Series Dimensions of indented square hole plastic tape h P [mm] W W0 D0 P1 ± 0.7 3.85 F W W0 W1 W2 H D0 ± 1.0 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 ± 0.2 5.0 18 12.5 9.0 3.0 18 ø4.0 d 0.6 h ± 2.0 0 [mm] W1 d H P1 F P0 ± 0.3 12.7 W2 H1 P ± 1.0 12.7 H1 SBCP-11HY H max. 32 P0 Power Inductors VOL.10 99 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBCP-14HY Coils [RoHS [RoHS Compliant] Compliant] ●SBCP-14 HY Series (SBCP-14HY□□□B) Model SBCP-14HY1R2B SBCP-14HY2R2B SBCP-14HY3R3B SBCP-14HY4R7B SBCP-14HY6R8B SBCP-14HY100B SBCP-14HY150B SBCP-14HY220B SBCP-14HY330B SBCP-14HY470B SBCP-14HY680B SBCP-14HY101B SBCP-14HY151B SBCP-14HY221B SBCP-14HY331B SBCP-14HY471B SBCP-14HY681B SBCP-14HY102B SBCP-14HY152B SBCP-14HY222B SBCP-14HY332B SBCP-14HY472B SBCP-14HY682B SBCP-14HY103B Inductance at 10 kHz, 1mA （μH） 1.2± 30% 2.2± 30% 3.3± 30% 4.7± 20% 6.8± 20% 10± 20% 15± 20% 22± 20% 33± 20% 47± 10% 68± 10% 100± 10% 150± 10% 220± 10% 330± 10% 470± 10% 680± 10% 1000± 10% 1500± 10% 2200± 10% 3300± 10% 4700± 10% 6800± 10% 10000± 10% DC resistance （Ω） max. Rated current （Ａ） ΔT=20℃ ΔT=40℃ 5.20 4.35 4.10 3.60 3.35 3.00 2.80 2.70 2.40 1.90 1.70 1.50 1.30 1.05 0.95 0.80 0.67 0.59 0.47 0.38 0.33 0.27 0.22 0.17 7.40 5.11 6.00 5.07 4.69 4.20 3.90 3.73 3.30 2.74 2.45 2.15 1.85 1.51 1.35 1.10 0.93 0.82 0.67 0.54 0.46 0.38 0.29 0.24 20m 20m 20m 30m 30m 40m 50m 60m 70m 90m 0.11 0.14 0.20 0.31 0.38 0.54 0.90 1.16 1.52 2.36 3.42 4.97 7.17 10.86 Current (Reference value) （Ａ） L change rate–10% 24.30 16.82 18.20 14.36 11.86 10.30 8.07 6.94 5.63 4.58 3.76 3.10 2.70 2.20 1.84 1.48 1.24 1.01 0.80 0.69 0.57 0.48 0.38 0.31 Package: Bulk・1,500pcs/box ●Operating temperature range:−20 to +105℃(including the heat generation by the coil) Power Inductors VOL.10 100 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type Shape and Dimensions 1.0 3.5+ - 0.5 15.0 max. ø12 max. *Lead: hard copper wire (ø0.6) 5.0±0.5 [mm] Numbering System SBCP - 14HY 100 B ① Series ② Core size : Outer size x height（φ11×14） ③ Inductance：10×10 0=10（μH） ④ Packaging type：[B] indicates bulk type. DC-Superposed Characteristics Measuring instrument : HP4284A(10kHz、1mA) Measuring instrument : HP4284A(10kHz、1mA) 50 550 500 450 30 Inductance (μH) Inductance (μH) 40 SBCP-14HY330B 20 SBCP-14HY100B 10 0 SBCP-14HY3R3B SBCP-14HY1R2B 0 2 4 6 8 10 12 14 16 18 20 SBCP-14HY471B 400 350 SBCP-14HY391B 300 SBCP-14HY331B 250 200 SBCP-14HY151B 150 100 50 22 Idc (A) 0 SBCP-14HY101B 0 0.5 1 1.5 2 2.5 3 3.5 4 Idc (A) Measuring instrument : HP4284A(10kHz、1mA) 12000 Inductance (μH) 10000 SBCP-14HY103B 8000 SBCP-14HY682B 6000 SBCP-14HY472B 4000 SBCP-14HY332B SBCP-14HY222B 2000 SBCP-14HY102B 0 0 0.20 0.40 0.60 0.80 1.00 1.20 Idc (A) Power Inductors VOL.10 101 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 DIP Type SBPSC Coils 11R310･12R817 Series 〈Magnetically 〈Magnetically Shielded Shielded Type〉 Type〉 ［RoHS ［RoHS Compliant］ Compliant］ ●SBPSC-11R310 Series ●SBPSC-12R817 Series Inductance Reted DC resistance Model （μH） Current （Ω）max. （100kHz.1mA） （A） 3.80 ±20% 10 SBPSC-11R310-100A 36m 3.40 ±20% 12 SBPSC-11R310-120A 48m 3.30 ±20% 15 SBPSC-11R310-150A 51m 2.85 ±20% 22 SBPSC-11R310-220A 87m 2.40 ±20% 27 SBPSC-11R310-270A 106m 2.10 ±20% 33 SBPSC-11R310-330A 132m 2.05 ±20% 39 SBPSC-11R310-390A 141m 1.80 ±20% 47 SBPSC-11R310-470A 181m 1.75 ±20% 56 SBPSC-11R310-560A 200m 1.65 ±20% 68 SBPSC-11R310-680A 221m 1.55 ±20% 82 SBPSC-11R310-820A 251m 1.45 ±15% 100 SBPSC-11R310-101A 272m 1.40 ±15% 120 SBPSC-11R310-121A 299m 1.15 ±15% 150 SBPSC-11R310-151A 390m 0.94 ±15% 220 SBPSC-11R310-221A 736m 0.88 ±15% 270 SBPSC-11R310-271A 839m 0.84 ±15% 330 SBPSC-11R310-331A 936m 0.74 ±15% 390 SBPSC-11R310-391A 1.20 0.70 ±15% 470 SBPSC-11R310-471A 1.40 0.48 ±15% 680 SBPSC-11R310-681A 2.00 0.46 ±15% 820 SBPSC-11R310-821A 2.30 0.43 ±15% SBPSC-11R310-102A 1000 2.60 Inductance Reted DC resistance （μH） Current （Ω）max. （100kHz.1mA） （A） 4.70 ±20% 29m 10 SBPSC-12R817-100A 4.40 ±20% 32m 12 SBPSC-12R817-120A 4.20 ±20% 35m 15 SBPSC-12R817-150A 3.90 ±20% 43m 22 SBPSC-12R817-220A 3.60 ±20% 48m 27 SBPSC-12R817-270A 3.50 ±20% 52m 33 SBPSC-12R817-330A 3.30 ±20% 58m 39 SBPSC-12R817-390A 3.20 ±20% 61m 47 SBPSC-12R817-470A 3.10 ±20% 66m 56 SBPSC-12R817-560A 2.90 ±20% 75m 68 SBPSC-12R817-680A 2.50 ±20% 96m 82 SBPSC-12R817-820A 2.40 ±15% 0.14 100 SBPSC-12R817-101A 2.20 ±15% 0.18 120 SBPSC-12R817-121A 1.65 ±15% 0.26 150 SBPSC-12R817-151A 1.40 ±15% 0.40 220 SBPSC-12R817-221A 1.30 ±15% 0.47 270 SBPSC-12R817-271A 1.20 ±15% 0.53 330 SBPSC-12R817-331A 1.15 ±15% 0.57 390 SBPSC-12R817-391A 1.10 ±15% 0.62 470 SBPSC-12R817-471A 1.00 ±15% 0.70 560 SBPSC-12R817-561A 0.90 0.84 680 SBPSC-12R817-681A ±15% 0.80 0.94 820 SBPSC-12R817-821A ±15% 0.70 1.10 SBPSC-12R817-102A 1000 ±15% Package: Bulk・1,600pcs/box Model Package: Bulk・800pcs/box *The rated current is the lower value of the following two: the DC curent value when the inductance decreases 10% from the initial value , or the DC current value when the coil's temperature has rose ΔT=40˚C ●Operating temperature range: –20 to +105˚C (Incl. coil heat) Shape and Dimensions ●SBPSC-11R310 Series ●SBPSC-12R817 Series wind end mark （ø1.0 notch on the core） wind end mark （ø1.0 notch on the core） 5.0±0.5 ø0.65 5.0±0.5 5.0±1.0 5.0±1.0 ø0.6 17.0 max. 13.5 max. 10.5 max. 12.0 max. [mm] Power Inductors VOL.10 102 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Power Inductors VOL.10 103 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9631PWIVOL10E1205E0 Precautions ● The names of the products and the specifications in this catalog are subject to change without notice for the sake of improvement. The manufacturer also reserves the right to discontinue any of these products. At the time of delivery, please ask for specifications sheets to check the contents in order to use the products properly and safely. ● Descriptions in this catalog regarding product characteristics and quality are based solely on discrete components. When using these components, be sure to check the specifications with the component in question mounted on the products. , ● The manufacturer s warranty will not cover any disadvantage or damage caused by improper use of the products that deviates from the characteristics, specifications, or conditions for use described in this catalog. ● The products in this catalog are intended for use in ordinary electronic products. If any of these products are to be used in special applications requiring extremely high reliability, such as in aviation equipment and nuclear power controllers where product defects might pose a safety risk, please consult your NEC TOKIN sales representatives. ● Though the manufacturer has taken all possible precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fire, or similar accident. If you have any questions regarding the use of the products in question, please consult your NEC TOKIN sales representatives. ● Please be advised that the manufacturer accepts no responsibility for any infraction by users of the , manufacturer s products on third party patents or industrial copyrights. The manufacturer is responsible only when such infractions are attributable to the structural design of the product and its manufacturing process. ● Export Control For customers outside Japan NEC TOKIN products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons(nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. ● This catalog is current as of May 2012.