Series AM3T-NZ 3 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model AM3T-0505S-NZ AM3T-0509S-NZ AM3T-0512S-NZ AM3T-0515S-NZ Models Dual output Model AM3T-0505D-NZ AM3T-0512D-NZ AM3T-0515D-NZ RoHS compliant 24 Pin DIP Package Shielded metal package High efficiency up to 83% Wide 2:1 input range • • • • Operating temperature -40oC to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 5 9 12 15 ±5 ±12 ±15 600 333 250 200 ±300 ±125 ±100 1500 1500 1500 1500 1500 1500 1500 68 70 72 73 68 721 73 NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise www.aimtec.com F 051e R6.B Nominal Typical 5 4.5-9 Maximum π (Pi) Network Conditions 60 sec Typical Maximum Typical Maximum 1500 > 1000 100 Conditions 20MHz bandwidth ±1 ±3p and ±5 n. Continuous Auto-recovery ±0.2 ±0.5 ±0.5 ±1 ±0.03 80 Tel: +1 514 620 2722 1 of 3 Units VDC Units VDC MOhm pF Units % % % % % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ 3 Watt | DC-DC Converter General Specifications Parameters Conditions Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Single 1 2 3 9 10 11 12/13 14 15 16 22 23 24 No pin -V Input -V Input No pin No pin N.C. No pin +V Output No pin -V Output V+ Input V+ Input No pin 300 Maximum -40 to +85 -55 to +125 Free air convection Metal Units 100 KHz o C o C o C 95 % 15 1.25 x 0.80 x 0.40 inches 31. 80 x 20.30 x 10.20 mm >1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Pin Out Specifications Pin Typical 100% load With derating above +71C g Dimensions 1500VDC Dual No pin -V Input -V Input Common No pin -V Output No pin +V Output No pin Common +V Input +V Input No pin N.C.: not connected Filtering Single output Filtering Dual output Derating www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ 3 Watt | DC-DC Converter Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C External capacitors Vin (VDC) Cin) (uF) 5 100 Vout (VDC) 3.3 5 12 15 Cout (uF) 2200 1000 470 330 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only